Hostname: page-component-8448b6f56d-jr42d Total loading time: 0 Render date: 2024-04-23T11:06:33.306Z Has data issue: false hasContentIssue false
  • English
  • Français

Sol-Gel Protective Films for Metal Solar Mirrors*

Published online by Cambridge University Press:  25 February 2011

Scott Reed  and
Carol Ashley
Scott Reed
Affiliation:
Sandia National Laboratories, P.O. Box 5800, Albuquerque, NM 87185
Carol Ashley
Affiliation:
Sandia National Laboratories, P.O. Box 5800, Albuquerque, NM 87185
Get access

Abstract

Front-surface metal mirrors were coated with a variety of sol-gel derived glass films for preliminary evaluation as protective coatings for silver. Optical measurements (hemispherical, diffuse and specular reflectance) were used to characterize changes in the mirror resulting from the application of the sol, subsequent processing, or environmental testing. The abrasion resistance of the films was determined on sol-gel coated silicon wafers per ASTM procedures. The mirrors were exposed to outdoor environments in Albuquerque, N.M., as well as accelerated testing in H2SO4, with periodic monitoring of optical properties. A two layer coating scheme, consisting of a thin primary protective layer of sputter deposited SiO2 followed by a thicker sol-gel overcoat, was also evaluated.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 121: Symposium H – Better Ceramics Through Chemistry III , 1988 , 631
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

This work performed at Sandia National Laboratories supported by the U.S. Department of Energy under contract number DE-AC04–76DP00789. Mat. Res.

References

REFERENCES

U.S. Dept. of Energy Report, DOE/CE-0160/UC-62 (1986).Google Scholar
2. Ashley, C.S., Reed, S.T., and Mahoney, A.R., these Proceedings.Google Scholar
3. Franey, J.P., Kanunlott, G.W., and Graedel, T.E., Corrosion Science 25, 133 (1985).Google Scholar
4. Park, H.S. and Day, D.E., Solar Energy Matls, 13, 367 (1986).Google Scholar
5. Park, H.S. and Day, D.E., Solar Energy Matls, 13, 351 (1986).Google Scholar
6. Czanderna, A.W. and Schissel, P., Solar Energy Matls, 14, 341 (1986).Google Scholar
7. Brinker, C.J., Keefer, K.D., Schaeffer, D.W. and Ashley, C.S., J. Non-Crys. Solids 48 (1), 47–64 (1982).Google Scholar
8. Ashley, C.S. and Reed, S.T., Sandia Nat. Labs Report SAND84–0662 (1984).Google Scholar