Hostname: page-component-8448b6f56d-mp689 Total loading time: 0 Render date: 2024-04-20T04:10:00.306Z Has data issue: false hasContentIssue false
  • English
  • Français

Sol-Gel Deposition of Electronic Ceramic Films.

Published online by Cambridge University Press:  28 February 2011

J.M. Bell ,
B. Ben-Nissan ,
M. Anast ,
B.O. West ,
L. Spiccia ,
J. Cullen ,
I. Watkins ,
D. Devilliers  and
G. Johnston
J.M. Bell
Affiliation:
University of Technology, Sydney, P.O. Box 123, Broadway, NSW, 2007 Australia
B. Ben-Nissan
Affiliation:
University of Technology, Sydney, P.O. Box 123, Broadway, NSW, 2007 Australia
M. Anast
Affiliation:
University of Technology, Sydney, P.O. Box 123, Broadway, NSW, 2007 Australia
B.O. West
Affiliation:
Department of Chemistry, Monash University, Clayton, Victoria, 3168, Australia
L. Spiccia
Affiliation:
Department of Chemistry, Monash University, Clayton, Victoria, 3168, Australia
J. Cullen
Affiliation:
Department of Chemistry, Monash University, Clayton, Victoria, 3168, Australia
I. Watkins
Affiliation:
Department of Chemistry, Monash University; and Silicon Technologies Australia, 22 Sophia Street, Crows Nest, NSW, 2065, Australia
D. Devilliers
Affiliation:
Department of Chemistry, Monash University, Clayton, Victoria, 3168, Australia
G. Johnston
Affiliation:
Defence Science and Technology Organisation, P.O. Box 50, Ascot Vale, Victoria, 3032, Australia.
Get access

Abstract

We describe a dip-coating method of depositing thin electronic ceramic coatings on various substrates from sol-gel solutions. The solutions we use are alkoxide-based, although the specific formulations depend on the system being deposited. We are working with two electronic ceramic systems: barium titanate on glass, and alumina, and yttrium barium copper oxide on alumina. We discuss methods used to reduce and remove processing defects such as crazing, cracking and pin-holing. We are also studying the effects of varying the processing conditions (dipping, hydrolysis and firing) on the electronic properties of the films. Initial results on BaTiO3 indicate that it is better to deposit thin films (∼0.1 – 0.2μm) and build up the coating thickness by repeated dipping.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 180: Symposium A – Better Ceramics Through Chemistry IV , 1990 , 453
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Dislich, H., Sol-Gel Technology for Thin Films, Fibres, Preforms, Electronics and Specialty Shapes, Klein, L.C. (ed), Noyes Publications, New Jersey, 1988 (Chapter 4)Google Scholar
[2] Dislich, H., Hinz, P. and Wolf, G., U.S. Patent No. 4, 229, 491 Dec. 13, 1977 Google Scholar
[3] Koplick, A.J., International Patent Application No. PCT/AU87/00324, 1987Google Scholar
[4] Arfsten, N.J., Kaufman, R. and Dislich, H., German Patent Application, 1983Google Scholar
[5] Arfsten, N.J., Kaufman, R., Dislich, H., Ultrastructural Processing of Ceramics, Glasses and Composites, (Wiley and Sons, 1984), Chapter 15Google Scholar
[6] Kozuka, H., Umeda, T., Jin, J., Monde, T. and Sakka, S., Bull. Inst. Chem. Res., Kyoto University, 66 80 (1988)Google Scholar
[7] Sakka, S., MRS International Meeting on Advanced Materials 1989, 6 221 (1989)Google Scholar
[8] Asano, T., Tran, K., Byrne, A.S., Rahman, M.M., Huang, C.Y. and Reardon, J.D., App. Phys. Lett. 54 1275 (1989)Google Scholar
[9] Tulloch, G., private communication.Google Scholar
[10] Cocking, J.L. and Johnston, G.R., “Characterisation of Oxidised Surfaces”, in Surface Analysis Sexton, B., Smart, R. and O'Connor, J. (eds), Springer Verlag, to be publishedGoogle Scholar