Skip to main content Accessibility help

Sintering of HAp precipitated from solutions containing ammonium nitrate and PVA

  • Tatiana Victorovna Safronova (a1), Valery I. Putlyaev (a2), Alexey V. Belyakov (a3) and Mikhail A. Shekhirev (a4)


Bioceramics based on hydroxyapatite (HAp) is known to be a prospective material for biomedical applications. However, sintering of HAp is still understudied in sense of reasonable selection of controlling parameters. In particular, the role of impurities and co-products of powder fabrication is still questionable. The data concerning the role of ammonium nitrate coming to precipitated HAp from the mother liquor, its effect on powder compaction and subsequent sintering, are not available.

Nanosized powders of HAp were fabricated via conventional wet-precipitation technique by dropwise adding of Ca(NO3)2 solution (0.25 -1.67 M) to the stock solution of (NH4)2HPO4 (0.15-1.00 M) with pre-adjusted pH at 60°C in presence of polyvinyl alcohol (PVA). PVA was added to the stock solution in order (i) to block crystal growth during synthesis , (ii) to improve stability of Hap suspension to sedimentation, (iii) to regulate an aggregation of HA nanoparticles during synthesis and in the stage of drying.

NH4NO3 – a by-product of the precipitation reaction, presented in as-precipitated powder in amount of 30%, was evaluated as an additive affecting a compaction of the powder and the initial stage of a sintering. The powder samples were tested by XRD, FTIR, light-scattering , TEM and SEM/EDX to get particle sizes, morphology and chemical composition, dilatometry. Ceramics were sintered at 700-1250°C and evaluated with SEM/EDX and density measurements.

Addition of PVA to the stock solution in the course of HAp precipitation is a promising technique to control an aggregation of HAp nanoparticles in the stages of drying and sintering. PVA acting as a surfactant in the solution and as a binder in dry powder can keep highly reactive small HAp particles within large agglomerates providing better molding of the powder and controllable densification of ceramics. The effect of PVA on microstructure of the HAp powder and their sintering behaviour is discussed in terms of self-organisation concept and synergetics.



Hide All
1. Hench, L.L., “Bioceramics: From Concept to Clinic”, J. Am. Ceram. Soc., 74 1487–510 (1991)
2. Ying, , et al. Nanocrystalline apatites and composites, prostheses incorporating them, and method for their production, United States Patent, 2000, 6, 013, 591
3. Raynaud, S., Champion, E., Bernache-Assollant, D., Thomas, P.Calcium phosphate apatites with variable Ca/P atomic ratio I. Sinthesis, Characterisation and thermal stability of powders”, Biomaterials 23, 10651072 (2002).
4. Balkevich, V.L., Belyakov, A.V., Safronova, T.A. “Synthesis of disaggregated fine mullite powder by meanse of chemical methods” Steklo I keramika, º5, 2527 (1985), (in Russian).
5. Ombretta, Massala and Seshardi, Ram. “Synthesis Routes for Large Volumes of nanoparticlesAnnu. rev. Mater. Res. 34, 4181 (2004).
6. Si, Satyabrata, Kotal, Atanu, Mandal, Tarun K., Giri, Saurav, Nakamura, Hiroyuki, and Kohara, Takao, “Size-Controlled Synthesis of Magnetite Nanoparticles in the presence of PolyelectrolytesChem. Mater. 16, 34893496 (2004).
7. Belyakov, A.V.Methods of preparation of inorganic nonmetallic nanoparticles” (MCTUR, Moscow, 2003), 80 p (in Russian).
8. Amid, Z.The influence of Polyphosphates, Phosphonates, and poly(carboxylic acids) on Crystal Growth of hydroxyapatiteLangmuir 3, 10631069 (1987)
9. Belyakov, A.V., Yenko, A.S., “Regions of Local Densification and their Role in Ceramics. Analysis of Fracture Surfaces as Simple Tool to Study the Local Densification Regions in Oxide Ceramics, Fracture Mechanics of Ceramics” V. 13. Crack-Microstructure Intyeraction, R-Curve Behavior, Enviromental Effect in Fracture, and Standartization. (N-Y., Boston, Dordrecht, London, Moscow: Kluwer Academic/Plenum Publishers, 2002) - 529 p. - P. 497502.
10. Belyakov, A.V., “Principal Bifurcations in Firing of Compact Oxide ceramics”, Glass and Ceramics 57, Nº 10, 345349 (2000)
11. Prigogine, I., The End of Certitude. (Free Press, N.Y.1997).
12. Belyakov, A.V., “Synergetic and Quasichemical Approaches in Ceramic Technology(a Review) Glass and Ceramics. 60, Nº 9 – 10, 274279 (2003).
13. Raynaud, S., Champion, E., Bernache-Assollant, D., Thomas, P., “Calcium phosphate apatites with variable Ca/P atomic ratio II. Calcination and sintering”, Biomaterials, 23, 10731080 (2002).


Sintering of HAp precipitated from solutions containing ammonium nitrate and PVA

  • Tatiana Victorovna Safronova (a1), Valery I. Putlyaev (a2), Alexey V. Belyakov (a3) and Mikhail A. Shekhirev (a4)


Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed