Hostname: page-component-848d4c4894-nmvwc Total loading time: 0 Render date: 2024-06-20T02:34:28.270Z Has data issue: false hasContentIssue false
  • English
  • Français

Secondary Grain Growth in Heavily Doped Polysilicon During Rapid Thermal Annealing

Published online by Cambridge University Press:  15 February 2011

S. Batra ,
K. Park ,
M. Lobo  and
S. Banerjee
S. Batra
Affiliation:
The University of Texas at Austin, Austin, TX - 78712.
K. Park
Affiliation:
The University of Texas at Austin, Austin, TX - 78712.
M. Lobo
Affiliation:
The University of Texas at Austin, Austin, TX - 78712.
S. Banerjee
Affiliation:
The University of Texas at Austin, Austin, TX - 78712.
Get access

Abstract

To successfully implement Silicon-on-Insulator (SOI) technology using polysilicon-on-oxide, it is necessary to maximize the grain size such that the active devices are entirely within very large single crystal grains. A drastic increase in grain size in polysilicon has been reported due to secondary grain growth in ultra-thin, heavily n-type doped films upon regular furnace annealing. Very little work has been undertaken, however, to study secondary grain growth during Rapid Thermal Annealing (RTA).This paper is a study of the grain growth mechanism in heavily P-doped, amorphous silicon films during RTA. Secondary grains as large as 16 μm have been obtained in 160 nm thick films after a 180 s RTA at 1200 °C, representing a grainsize- to-film-thickness-ratio of 100:1. This is the largest secondary grain size and grain-size-to-film-thickness reported in the literature. A detailed analysis of negatively charged silicon vacancies has also been employed to explain the lower activation energy (1.55 eV) of secondary grain growth compared to that of normal grain growth (2.4 eV).

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 230: Symposium R – Phase Transformation Kinetics in Thin Films , 1991 , 201
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Gibbons, J. F. and Lee, K. F., IEEE Electron Dev. Lett., EDL–1, 117 (1980).Google Scholar
2. Mullins, W. W., ACTA Metallurgica, 6, 414 (1958).Google Scholar
3. Nolan, T., Beyers, R.. and Sinclair, R., presented at the 1990 MRS Fall Meeting, Boston, MA, 1990 (unpublished).Google Scholar
4. Kim, H. J. and Thompson, C. V., J. Appl. Phys, 67, 757 (1990).Google Scholar
5. Kim, H. J. and Thompson, C. V., J. Electrochem. Soc., 135, 2312 (1988).Google Scholar
6. Wada, Y. and Nishimatsu, S., J. Electrochem. Soc., 125. 1499 (1978).Google Scholar
7. Shockley, W. and Last, J. T., Phys. Rev., 107, 392 (1957).Google Scholar
8. Park, K., Batra, S. and Banerjee, S., accepted for publication by Appl. Phys. Lett.Google Scholar
9. Thompson, C. V., J. Appl. Phys., 58, 763 (1985).Google Scholar