Hostname: page-component-8448b6f56d-dnltx Total loading time: 0 Render date: 2024-04-25T04:40:15.743Z Has data issue: false hasContentIssue false

Pulsed Laser Deposition of Ferroelectric Multilayer Capacitors YBa2Cu3O7−δ/BaTiO3/YBa2Cu3O7−δ on Si(100) Substrates

Published online by Cambridge University Press:  15 February 2011

J. Luo
Affiliation:
AFR, Inc., 87 Church Street, East Hartford, CT 06108 Also, CoreTek, Inc., 738 Main St., No. 247, Waltham, MA 02154
Q. Li
Affiliation:
AFR, Inc., 87 Church Street, East Hartford, CT 06108
D.B. Fenner
Affiliation:
AFR, Inc., 87 Church Street, East Hartford, CT 06108
S. Liu
Affiliation:
AFR, Inc., 87 Church Street, East Hartford, CT 06108
W.D. Hamblen
Affiliation:
AFR, Inc., 87 Church Street, East Hartford, CT 06108
X.D. Wu
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM 87545
Get access

Abstract

Ferroelectric multilayer capacitors (YBCO/BTO/YBCO) are fabricated on YSZ buffered Si (100) substrates by using pulsed-laser deposition technique. The deposition process is monitored in situ by using a Fourier Transform Infrared Spectrometer (FTIR), which measures the film's deposition rate and dielectric constant during the growth process. All four oxide layers in such a multilayer capacitor are grown in situ without breaking the vacuum, and without lowering the substrate temperature to below 600°C. The electrical properties and microstructures of the multilayer capacitor are studied and the optimal deposition condition are identified. Sharp resistive transitions are achieved for both the top and the bottom YBCO layers with on-sets at 90 K, zero resistance at 89 K for the bottom layer and 88K for the top layer. X-ray diffraction θ-2θand φ scans indicate that all four deposited oxide layers have their c-axis perpendicular to the substrate, and have less that 10% in-plane misorientation. The dielectric constant of the BTO layer is over 210. Hysteresis P-E characteristics and current-voltage curves are also measured to determine dielectric properties of the barium titanate films. Preliminary results with LaSrCoO (LSCO) electrode layer are also presented.

Type
Research Article
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Sayer, M. and Screenivas, K., Science 247, 1056 (1990);Google Scholar
Scott, J.F. and Paz de Araujo, C.A., Science 247, 140 (1989).Google Scholar
[2] Hwang, D.M., Ramesh, R., Chen, C.Y., Wu, X.D., Inam, A., Hegde, M.S., Wilkens, B., Chang, C.C., Nazar, L., Venkatesan, T., Miura, S., Matsubara, S., Miyasaka, Y., Shohata, N., J. Appl. Phys. 68 (4), 1772 (1990).Google Scholar
[3] Ramesh, R., Inam, A., Wilkens, B., Chan, W.K., Sands, T., Tarascon, J.M., Fork, D.K., Geballe, T.H., Evans, J., and Bullington, J., Appl. Phys. Lett. 59, 1782 (1991).Google Scholar
[4] Fork, D.K., Fenner, D.B., Barrera, A., Phillips, J.M., Geballe, T.H., Connell, G.A.N., and Boyce, J.B., IEEE Trans. Applied Superconductivity, Vo. 1, No. 1, 67, (1991).Google Scholar
[5] Li, Q., Liu, S., Fenner, D.B., Luo, J., Solomom, P.R., “An in situ optical sensor for pulsed laser deposition of thin films”, Presented at the 1994 Applied Superconductivity Conference in Boston, MA (to be published).Google Scholar
[6] Fenner, D.B., Li, Qi, Hamblen, W.D., Johansson, M.E., Hamblen, D.G., Lynds, L., Budnick, J.I., Appl. Phys. Lett., 57, 1137 (1990).Google Scholar
[7] Davis, G.M., and Gower, M.C., Appl. Phys. Lett. 55(2), 112 (1989).Google Scholar
[8] Roy, D., Krupanidhi, S.B., Appl. Phys. Lett. 61, 2057 (1992);Google Scholar
Cook, L.P., Vaudin, M.D., Schenck, P.K., Wong-Ng, W., Chiang, C.K., and Brody, P.S., Mater. Res. Soc. Symp. Proc. 202, 241 (1991).Google Scholar