Hostname: page-component-848d4c4894-xm8r8 Total loading time: 0 Render date: 2024-06-24T18:17:58.507Z Has data issue: false hasContentIssue false
  • English
  • Français

Properties of Reactively Synthesized Titanium Aluminides

Published online by Cambridge University Press:  22 February 2011

D. E. Alman ,
J. A. Hawk  and
R. D. Wilson
D. E. Alman
Affiliation:
U.S. Bureau of Mines, Albany Research Center, Albany, OR 97321
J. A. Hawk
Affiliation:
U.S. Bureau of Mines, Albany Research Center, Albany, OR 97321
R. D. Wilson
Affiliation:
U.S. Bureau of Mines, Albany Research Center, Albany, OR 97321
Get access

Abstract

Reactive synthesis directly forms compounds from their elemental constituents. In this U.S. Bureau of Mines study the microstructure, hot-hardness and tensile properties of alloys and composites based on TiAl and Ti2AlNb were studied. Ti2AlNb sheets were processed from elemental Ti, Al and Nb foils. The elemental foils were consumed during processing, leaving a microstructure consisting of three phases: O (orthorhombic Ti2AlNb), B2 (ordered cubic Ti), and α2 (Ti3Al). The composite sheet structures were heat-treated to produce a microstructure consisting of O lathes in a B2 matrix. A significant advantage of reactive synthesis is the ease of formation of complex shapes prior to synthesis of the aluminide. TiAl-based alloys and in situ TiAl/boride and TiAl/Ti5Si3 composites were produced from elemental mixtures of Ti and Al with either additions of B or Si powders. The hot-hardness and tensile properties of these alloys and composites are reported. The Kirkendall porosity associated with reactive sintering of TiAl can be eliminated by simultaneously reactive sintering TiAl and Ti5Si3.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 364: Symposium L – High-Temperature Ordered Intermetallic Alloys–VI , 1994 , 805
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Anseltni-Tamburini, U. and Munir, Z.A., J. Appl. Phys. 66, 5039 (1989).Google Scholar
2. Alman, D.E., Hawk, J.A., Petty, A.V. Jr. and Rawers, J.C., JOM 46(3), 31 (1994).Google Scholar
3. Alman, D.E., Rawers, J.C. and Hawk, J.A., Metall. Mater. Trans., (1995).Google Scholar
4. Rowe, R.G., in Microstructure/Properties Relationships in Titanium Aluminides, edited by Kim, Y-W. and Boyer, R.R. (TMS, Warrendale, PA, 1991) pp. 387.Google Scholar
5. Rhodes, C.G., Graves, J.A., Smith, P.R. and James, M.R., in International Symposium on Structural Intermetallics, edited by Darolia, R. et al. (TMS, Warrendale, PA, 1993) pp. 45.Google Scholar
6. Banerjee, D., Gogia, A.K., Nandi, T.K. and Joshi, V.A., Acta Metall. 36, 871 (1999).Google Scholar
7. Flemings, M.C., Adv. Mater. Proc, 145(1), 22 (1994).Google Scholar
8. Alman, D.E., Hawk, J.A. and Ziomek-Moroz, M., “Properties of In-Situ TiAl- and MoSi2-Base Composites Produced by Reactive Processing,” 1995 Annual TMS Meeting, Feb, 1995 and to be published in conference proceeding.Google Scholar
9. Dahms, M., Dogan, B., Smarsly, W. and Wang, G-X., presented at International Conference on P/M Aerospace Materials, 4–6 Nov 1991, Lausanne, Switzerland (unpublished).Google Scholar
10. Oddone, R. and German, R.M., Adv. Powder Metall. 3, 475 (1989).Google Scholar