Hostname: page-component-8448b6f56d-cfpbc Total loading time: 0 Render date: 2024-04-19T10:34:42.548Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation and Oxygen Permeability of Gd-Doped Ceria and Spinel-Type Ferrite Composites

Published online by Cambridge University Press:  11 February 2011

Hitoshi Takamura ,
Masashi Kawai ,
Katsutoshi Okumura ,
Atsunori Kamegawa  and
Masuo Okada
Hitoshi Takamura
Affiliation:
Department of Materials Science, Graduate School of Engineering, Tohoku University, Sendai 980–8579, JAPAN.
Masashi Kawai
Affiliation:
Department of Materials Science, Graduate School of Engineering, Tohoku University, Sendai 980–8579, JAPAN.
Katsutoshi Okumura
Affiliation:
Department of Materials Science, Graduate School of Engineering, Tohoku University, Sendai 980–8579, JAPAN.
Atsunori Kamegawa
Affiliation:
Department of Materials Science, Graduate School of Engineering, Tohoku University, Sendai 980–8579, JAPAN.
Masuo Okada
Affiliation:
Department of Materials Science, Graduate School of Engineering, Tohoku University, Sendai 980–8579, JAPAN.
Get access

Abstract

The preparation and oxygen permeability of composites of Ce0.8Gd0.2O2-ö (GDC) and spinel-type ferrites, MFe2O4 (M = Co and Mn) have been investigated. The composites of GDC -x vol% MFe2O4, where x ranged from 5 to 65, were prepared by a citrate-based liquid-mix technique. The composites were found to be almost fully densified by sintering at 1300 °C for 2 h. From TEM observations, the grain size of GDC and spinel-type phases was found to be less than 0.5 μm. In the case of M = Co, GDC - 25 vol% CoFe2O4 with a membrane thickness of 1.0 mm exhibited an oxygen flux density of 0.21 μmol·cm-2·s-1 under the P(O2) difference between He (20 sccm) and air at 1000 °C. Under reducing atmosphere of Ar-5%H2, the oxygen flux density of this composite increased up to 1.3 μmol·cm-2·s-1. Moreover, under Ar-10%CH4 gas flow, GDC - 15 vol% MnFe2O4 with a membrane thickness of 0.24 mm exhibited the oxygen flux density of 2 and 7 μmol·cm- · s- at 800 and 1000 °C, respectively.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 756: Symposia EE/FF – Solid-State Ionics – Materials for Fuel Cells and Fuel Processors , 2002 , EE8.11
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Dyer, P. N., Richards, R. E., Russek, S. L. and Taylor, D. M., Solid State Ionics 134, 21 (2000).Google Scholar
2. Teraoka, Y., Zhang, H. M., Furukawa, S., and Yamazoe, N., Chem. Lett., 1743 (1985).Google Scholar
3. Ishihara, T., Yamada, T., Arikawa, H., Nishiguchi, H., Takita, Y., Solid State Ionics 135, 631 (2000).Google Scholar
4. Ishihara, T., Tsuruta, Y., Todaka, T., Nishiguchi, H., Takita, Y., Solid State Ionics, in press.Google Scholar
5. Chen, C. S., Boukamp, B. A., Bouwmeester, H. J. M., Cao, G. Z., Kruidhof, H., Winnubst, A. J. A., Burggraaf, A. J., Solid State Ionics 76, 23 (1995).Google Scholar
6. Kharton, V. V., Kovalevsky, A. V., Viskup, A. V., Figueiredo, F. M., Yaremchenko, A. A., Naumovich, E. N., Marques, F. M. B., J. Eur. Ceram. Soc. 21, 1763 (2001).Google Scholar
7. Nigge, U., Wiemhöfer, H. -D., Römer, E. W. J., M Bouwmeester, H. J., Schulte, T. R., Solid State Ionics 146, 163 (2002).Google Scholar
8. Tuller, H. L., Nowick, A. S., J. Electrochem. Soc. 126, 209 (1979).Google Scholar
9. Mogensen, M., Sammes, N. M., Tompsett, G. A., Solid State Ionics 129, 63 (2000).Google Scholar
10. Knauth, P., Tuller, H. L., Solid State Ionics 136–137, 1215 (2000).Google Scholar
11. Pechini, M. P., U.S. Patent #3, 330, 697 (1967).Google Scholar
12. Takamura, H., Tuller, H. L., Solid State Ionics 134, 67 (2000).Google Scholar