Hostname: page-component-7c8c6479df-995ml Total loading time: 0 Render date: 2024-03-28T19:48:34.910Z Has data issue: false hasContentIssue false

Precipitation at Grain Boundaries in Irradiated Austenitic Fe-Cr-Mn Alloys

Published online by Cambridge University Press:  22 February 2011

J. M. McCarthy*
Affiliation:
Pacific Northwest Laboratory, Operated for the Department of Energy by Battelle Memorial Institute, P. O. Box 999, Richland, WA 99352
Get access

Abstract

In previous work, the phase stability of Fe-Cr-Mn alloys during irradiation was investigated in a study that included simple binaries, simple ternaries and commercially produced alloys. These low activation alloys are being considered for fusion reactor service in the first wall and in other structural applications subject to high neutron doses. In addition to phase instabilities observed within the grains, grain boundaries were susceptible to varying levels of precipitation dependent upon alloy composition, displacement dose and irradiation temperature. This paper describes the grain boundary microstructures that developed in these Fe-Cr-Mn alloys during irradiation.

Type
Research Article
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Brager, H.R., Garner, F.A., Gelles, D.S. and Hamilton, M.L., J.Nuc.Mat. 133&134, 907 (1985).Google Scholar
2. Garner, F.A. and Brager, H.R., Radiation Induced Changes in Microstructure, ASTM STP 955, Eds. Garner, F.A., Packan, N.H. and Kumar, A.S. (ASTM, Philadelphia, 1987), p. 195.Google Scholar
3. Klueh, R.L. and Bloom, E.E. in Optimizing Materials for Nuclear Applications, Eds. Garner, F.A., Gelles, D.S. and Wiffen, F.W. (The Metallurgical Society, AIME, Warrendale, PA., 1985), p.73.Google Scholar
4. Bott, A.H., Pickering, F.B. and Butterworth, G.J., J.Nuc.Mat. 141–143, 294 (1986).Google Scholar
5. Snykers, M. and Ruedl, E., J.Nucl.Mater. 103&104, 1075 (1981).Google Scholar
6. Doran, D. G., Heinsch, H. L. and Mann, F. M.. J.Nucl.Matr. 133–134 (1985) 892.Google Scholar
7. Garner, F. A., Brager, H. R., Gelles, D. S. and McCarthy, J. M., J.Nuc.Mat. 148, 294 (1987).Google Scholar
8. McCarthy, J.M. and Garner, F.A., J.Nuc.Mat. 155–157, 877 (1988); Fusion Reactor Materials DOE/ER-0313/4, 146 March (1988).Google Scholar
9. McCarthy, J.M., Fusion Reactor Materials DOE/ER-0313/5, in press (1988).Google Scholar
10. Oikawa, H., Tech.Reports, Tohoku University 47, 251 (1982); 48, 7 (1983).Google Scholar
11. Takahashi, H., Garner, F.A., Itoh, H., Hu, B. and Ohnuki, S. Radiation Induced Changes in Microstructure, ASTM STP 955, Eds. Garner, F.A., Packan, N.H. and Kumar, A.S. (ASTM, Philadelphia, 1987), p. 268.Google Scholar
12. Lazarus, D., Solid State Physics 10, 71 (1960).Google Scholar
13. Hillert, M. and Purdy, G. R., Acta.Met. 26, 333, (1978).Google Scholar
14. Smidoda, K., Gottschalk, C. and Gliefer, H., Met.Sci., 13 (1979) p.146.Google Scholar
15. Garner, F.A., Abe, F. and Noda, T., J.Nuc.Mat. 155–157, 870, (1988).Google Scholar