Hostname: page-component-8448b6f56d-dnltx Total loading time: 0 Render date: 2024-04-24T01:22:03.404Z Has data issue: false hasContentIssue false
  • English
  • Français

Plasticity and Interfacial Dislocation Structures in Ti-Al

Published online by Cambridge University Press:  15 February 2011

L. Parrini ,
H. Heinrich  and
G. Kostorz
L. Parrini
Affiliation:
ETH Zürich, Institut für Angewandte Physik, CH-8093 Zürich, Switzerland
H. Heinrich
Affiliation:
ETH Zürich, Institut für Angewandte Physik, CH-8093 Zürich, Switzerland
G. Kostorz
Affiliation:
ETH Zürich, Institut für Angewandte Physik, CH-8093 Zürich, Switzerland
Get access

Abstract

The alloy Ti-48.6Al-l.9Cr-l.9Nb-IB with an equiaxed γ microstructure, obtained by heat treatment at 1200°C for 4 h, and with a lamellar mi ero structure, obtained by heat treatment at 1380°C for 1 h, is characterized by compression tests and transmission electron microscopy. A lower activity of superdislocations and a more frequent pinning of ordinary dislocations are detected in the lamellar Ti-Al specimens in comparison with the non-lamellar ones during deformation at room temperature. The activity of superdislocations and the pinning of ordinary dislocations are responsible for the differences in yield stress and brittleness between lamellar and non-lamellar Ti-Al. A very high density of ordinary interfacial dislocations is found in the lamellar structure. These influence the activity of superdislocations and the pinning of ordinary dislocations. At high temperature a change in the deformation mechanism occurs. Above the brittle-to-ductile transition, the material is remarkably softer and the mechanical properties are insensitive to the presence of the lamellar interfaces.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 460: Symposium Z – High-Temperature Ordered Intermetallic Alloys VII , 1996 , 147
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Sauthoff, G., Intermetallics. VCH, Weinheim, 1995, p. 30.Google Scholar
2. Hug, G., Ph.D. Thesis, Université Paris Sud (1988).Google Scholar
3. Chan, K., Kim, Y., Metall Trans. 23A, 1663 (1992).Google Scholar
4. Greenberg, B., Phys. Stat. Sol. 42B, 459 (1970)Google Scholar
5. Greenberg, B., Phys. Stat. Sol. 55B, 59 (1973).Google Scholar
6. Viguier, B., Ph.D. Thesis, Ecole Polytechnique Federale de Lausanne, Switzerland (1995).Google Scholar
7. Parrini, L, Heinrich, H., Kostorz, G, submitted to Script. Mat.Google Scholar
8. Kim, Y., in High-temperature ordered intermetallic alloys IV. edited by Johnson, L., Pope, P., Stiegler, J. (Mat. Res. Soc. Symp. Proc. 213, Pittsburgh, 1991) p. 777.Google Scholar
9. Luster, J., Ph.D. Thesis, Université deNeuchâtel, Switzerland (1993).Google Scholar
10. Inui, H., Oh, M., Nakamura, A., Yamaguchi, M., Act. Metall. 40, 3095 (1992)Google Scholar
11. Wunderlich, W., Kremser, T., Frommeyer, G., Act. Metall 8, 1791 (1993)Google Scholar
12. Appel, F., Beaven, P., Wagner, R., Acta Metall. 41, 1721 (1993)Google Scholar