Hostname: page-component-848d4c4894-xfwgj Total loading time: 0 Render date: 2024-07-03T06:22:38.071Z Has data issue: false hasContentIssue false

Photo-Induced Polarization Recovery in PZT Thin Film Capacitors

Published online by Cambridge University Press:  10 February 2011

S. A. Mansour
Affiliation:
School of Materials Engineering, Purdue University, West Lafayette, IN 47907–1289
A. V. Rao
Affiliation:
School of Materials Engineering, Purdue University, West Lafayette, IN 47907–1289
A. L. Bement Jr
Affiliation:
School of Materials Engineering, Purdue University, West Lafayette, IN 47907–1289
G. Liedl
Affiliation:
School of Materials Engineering, Purdue University, West Lafayette, IN 47907–1289
Get access

Abstract

Lead Zirconate Titanate (PZT) ferroelectric thin film capacitors were fabricated with metallic platinum and conducting Indium Tin Oxide (ITO) contacts. PZT thin films were fabricated using metallorganic decomposition (MOD) while a combination of MOD and RF-sputtering was used in fabricating the ITO-PZT-ITO capacitors. Photo-induced changes, manifested by an increase in switchable polarization, were studied before and after 108 switching cycles fatigue using white and monochromatic light. An increase in photo-induced changes was observed at 3.65eV light energies using monochromatic light using both capacitors. The increase was attributed to the excitation of electrons from PZT valence band into the conduction band causing an increase in film conductivity. However, polarization increase in Pt-PZT-Pt capacitor was more pronounced than ITO-PZT-ITO when white light was used. Some of the response in fatigued Pt-PZT-Pt capacitors was attributed to the excitation of electrons from the platinum Fermi level to oxygen vacancy sites trapped at the Pt-PZT interface by absorption of infrared radiation of white light. The latter observation implied a relationship between PZT fatigue and photo-induced effects.

Type
Research Article
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Carrano, J., Lee, J., Sudhama, C., Chikarmane, V., Tasch, A., Shepherd, W., and Abt, N., IEEE transactions on Ultrasonics, Ferroelectrics and frequency control” 38, 690 (1991).Google Scholar
2. Ramesh, R., Inam, A., Chan, W.K., Tillerot, F., Wilkens, B., Chang, C.C., Sands, T., Tarascon, J.M., Keramidas, V.G., Appl. Phys. Lett., 59, 3542 (1991).Google Scholar
3. Dimos, D., Warren, W.L., Tuttle, B.A., Mat. Res. Soc. Symp. Proc, 310, 87 (1993).Google Scholar
4. Peterson, C.R., Mansour, S.A., Bement, A. Jr, Integ. Ferro. 7, 139 (1995).Google Scholar
5. Dimos, D., Schwartz, R.W., Mat. Res. Soc. Symp. Proc, 243, 73 (1992).Google Scholar
6. Peterson, C.R., Mansour, S.A., Bement, A. Jr, Integ. Ferro. 10, 295 (1995).Google Scholar
7. Rao, A., Mansour, S.A., Bement, A.L. Jr, accepted, Materials Letters (1996).Google Scholar
8. Resnick, R., Halliday, D., Physics for students of Science and Engineering. 1960.Google Scholar
9. Driscoll, W., Vaughnan, W., Handbook of Optics, Optical Society Of America, McGrawhill Book Co., New York (1978).Google Scholar
10. Palik, E., Handbook of optical constants of solids, Academic Press, Orlando (1985).Google Scholar
11. l.Yoo, K., Desu, S.B., J. of Intelligent Mater Sys and Struc, 4, 490 (1993).Google Scholar
12. Scott, J.F., Araujo, C.A., Melnick, B.M., Mcmillan, L.D., Zuleeg, R., J. Appl. Phys., 70 (1), 382 (1991).Google Scholar