Hostname: page-component-8448b6f56d-sxzjt Total loading time: 0 Render date: 2024-04-19T06:00:40.205Z Has data issue: false hasContentIssue false

Phase Characterization and Grain Size Effects of Nanophase Y2O3, ZrO2 and Y2O3-ZrO2 Composites Produced by the Gas-Phase Condensation Technique

Published online by Cambridge University Press:  25 February 2011

C. M. Foster
Affiliation:
Argonne National Laboratory, Materials Science Division, 9700 S. Cass Ave, Argonne, IL 60493
G. R. Bai
Affiliation:
Argonne National Laboratory, Materials Science Division, 9700 S. Cass Ave, Argonne, IL 60493
J. C. Parker
Affiliation:
Nanophase Technologies Corporation, 8205 S. Cass Avenue, Darien, IL 60559
M. N. Ali
Affiliation:
Nanophase Technologies Corporation, 8205 S. Cass Avenue, Darien, IL 60559
Get access

Abstract

Nanophase (n-) ZrO2 was produced in its pure and partially stabilized form by the gas-phase condensation method. The material was examined by x-ray diffraction and Raman scattering to obtain information on the structural evolution of the material during sintering. Two types of Y2O3 doped ZrO2 nanophase materials were made one by co-deposition of n-Y2O3 and n-ZrO2 in a consecutive manner and the second by mechanically mixing n-Y2O3 and n-ZrO2. We have determined that the co-deposition process is the most effect means of doping the n-ZrO2.

Type
Research Article
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Gleiter, H., Prog. in Mat. Sci. 33, 223315 (1989).Google Scholar
2. Kear, B. H., Cross, L. E., Keem, J. E., Siegel, R. W., Spaipen, F., Taylor, K. C., Thomas, E. L., and Tu, K.-N., Research Opportunities for Materials with Ultrafine Microstructures, National Materials Advisory Board-454 (National Academy Press, Washington, DC, 1989).Google Scholar
3. Aksay, I.A., McVay, G.L., Ulrich, D.R., eds., Processing Science of Advanced Ceramics, Mat. Res. Soc. Symp. Proc., 155 (1989),Google Scholar
4. Siegel, R.W. in Materials Science and Technology Vol. 15, Processing of Metal and Alloys ed. by Cahn, R. W. (VCH Weinheim, 1991) and R.W. Siegel in Cluster-Assembled Nanophase Materials, Annual Review of Materials Science, Vol. 21, (1991) in press.Google Scholar
5. Hahn, H., Logas, J., Averback, R., J. Mater. Res. 5, 609 (1990).Google Scholar
6. Hahn, H., Averback, R.S., Höfler, J., Logas, J., Mat. Res. Soc. Symp. Proc. 206 (1991) p.569580.Google Scholar
7. Skandan, G., Hahn, H., Parker, J.C., Scripta Met. 25, 2389 (1991).Google Scholar
8. Niihara, K. and Nakahira, A., Advanced Structural Inorganic Composites, ed. by Vincenzini, P. (Elsevier, New York, 1990) pp. 637664.Google Scholar
9. A variety of synthesis, processing, and properties data on ZrO2 can be found in Advances in Ceramics Vol.12, Science and Technology of Zirconia II, ed. by Claussen, N., Ruhle, M., an Heuer, A.H. (Am. Ceram. Soc., Columbus Ohio 1983). For a comprehensive study of chemically synthesized Zr02 alloys see, e.g., M.A.C.G. Van deGraff, A. J. Burggraaf p.744.Google Scholar
10. Skandan, G., Foster, C.M., Frase, H., Ali, M.N., Parker, J.C., and Hahn, H., Nanostructured Mat. 1, (4) 313, (1992).Google Scholar
11. Hoekstra, H. R. and Gingerich, K. A., Science 64, 1163 (1964).Google Scholar
12. i. e. in Diffraction in Crystals, Imperfect Crystals and Amorphous Solids, ed. by Guinier, A., (W. H. Freemen and Comp., San Francisco, 1963).Google Scholar
13. Skandan, G., Hahn, H. and Parker, J. C., Scripta Met. 25, 2389 (1991).Google Scholar
14. i. e., in Phase Transformations in Metals and Alloys, ed. by Porter, D. A. and Easterling, K. E., (Chapman & Hall, London, rev. ed. 1991).Google Scholar
15. The evaporation of Zr and Y metals was performed by Joule heating a W boat. Some reactions between the boat a precursor can result in WO3 impurities within the nanophase material. WO3 stabilization of ZrO2 has been observed in Chang, L. L. Y., Scroger, M. G., and Phillips, B., J. Am. Ceram. Soc. 50 212 (1967).Google Scholar
16. Garvie, R. C., Goss, M.F., J. Mat. Sci. 21, 1253 (1986).Google Scholar
17. Perry, C. H., Liu, D.W., Ingel, R.P., J. Am. Ceram. Soc. 68, C184 (1985).Google Scholar
18. Foster, C. M., Bia, G. R., Parker, J. C., and Ali, M. N. (submitted J. Mater. Res.).Google Scholar