Hostname: page-component-848d4c4894-pftt2 Total loading time: 0 Render date: 2024-05-09T12:24:39.971Z Has data issue: false hasContentIssue false
  • English
  • Français

Oxidation Behaviour of Intermetallic Compounds Based on Ti-Al System

Published online by Cambridge University Press:  22 February 2011

A. Tomasi ,
S. Gialanella ,
P. G. Orsini  and
M. Nazmy
A. Tomasi
Affiliation:
Centro Materiali e Biofisica Medica, 38050, Povo, Trento, Italy.
S. Gialanella
Affiliation:
Dipartimento di Ingegneria dei Materiali, Univ. di Trento, 38050, Mesiano, Trento Italy.
P. G. Orsini
Affiliation:
Dipartimento di Ingegneria dei Materiali, Univ. di Trento, 38050, Mesiano, Trento Italy.
M. Nazmy
Affiliation:
ABB Power Genaration Ltd, CH 5401, Baden, Switzerland.
Get access

Abstract

In this study we present some results regarding phase and surface stability, with particular reference to the oxidation, of Ti alloys based on the γ-TiAl phase.

We investigated the stability of the metallic phases with TG and DSC methods, according to the temperature range over which the relevant transformations do occur. These tests were particularly useful to select times and temperatures for precipitation hardening treatments and also to evaluate the oxidation resistance.

The isothermal oxidation kinetics were followed with a thermobalance (TG) for time up to 25 hours and, for longer treatments, we put the samples in a furnace and measured their weight changes at fixed time intervals. The microstructure of the oxide scale was investigated with scanning electron microscopy and energy dispersion X-ray analysis and mapping. The identification of the crystalline phases was carried out with X-ray diffraction analysis.

The obtained results afford clear information on the predominant phenomena assisting the observed oxidation kinetics and give indications on the operating conditions suitable for these materials.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 364: Symposium L – High-Temperature Ordered Intermetallic Alloys–VI , 1994 , 999
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Lippsitt, H.A., in “Advanced High-Temperature Alloys”, (ASM ed., Metals Park, OH, 1986) p. 157.Google Scholar
2. Kim, Y-W., JOM, 41(7), 24 (1989)Google Scholar
3. Kim, Y-W. and Dimiduk, D., JOM, 43(8), 40 (1991)Google Scholar
4. Rowe, R.G., in “High-Temperature Aluminides and Intermetallics”, ed. Whang, S.H. et al.,(TMS ed.-Warrendale 1990), p.35.Google Scholar
5. Nazmy, M., ABB Internal Report (1994).Google Scholar
6. Kofstad, P., High Temperature Corrosion (Elsevier Applied Science, London, 1988) p.149.Google Scholar
7. Birks, N. & Meier, G.H., Introduction to High Temperature Oxidation of Metals, Edward Arnold, London, 1983, p.59 and 60.Google Scholar
8. D.W. McKee and S.C.Huang, in “High-Temperature Ordered Intermetallic Alloys-IV”, (Mater. Res.Soc. 213, Pittsburgh, PA, 1985) pp.939–943.Google Scholar
9. Shimizu, T., Iikubo, T. and Isobe, S., Mat. Sci.Eng., A153, 602 (1992).Google Scholar
10. Tomasi, A. and Gialanella, S., to be published.Google Scholar