Hostname: page-component-7c8c6479df-ws8qp Total loading time: 0 Render date: 2024-03-28T10:48:29.855Z Has data issue: false hasContentIssue false

Overheating and Undercooling in Silicon During Pulsed-Laser Irradiation*

Published online by Cambridge University Press:  25 February 2011

B. C. Larson
Affiliation:
Solid State Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831
J. Z. Tischler
Affiliation:
Solid State Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831
D. M. Mills
Affiliation:
CHESS and Applied and Engineering Physics, Cornell University, Ithaca, NY14853
Get access

Abstract

We have used time-resolved x-ray diffraction measurements of thermal expansion induced strain to measure overheating and undercooling in <100> and <111> oriented silicon during pulsed laser melting and regrowth. 249 nm (KrF) excimer laser pulses of 1.2 J/cm2 energy density and 25 ns FWHM were synchronized with x-ray pulses from the Cornell High Energy Synchrotron Source (CHESS) to carry out Bragg profile measurements with ±2 ns time resolution. Combined overheating and undercooling values of 120 ± 30 K and 45 ± 20 K were found for the <111> and <100> orientations, respectively, and these values have been used to obtain information on the limiting regrowth velocities for silicon.

Type
Research Article
Copyright
Copyright © Materials Research Society 1985

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

Research sponsored by the Division of Materials Sciences, U.S. Department of Energy under contract DE-AC05-840R21400 with Martin Marietta Energy Systems, Inc.

References

REFERENCES

[1] Brown, W. L., p. 9 in Energy Beam-Solid Interactions and Transient Thermal Processing, ed. by Fan, J. C. C. and Johnson, N. M., North-Holland, New York (1984).Google Scholar
[2] Gilmer, G. H., p. 249 in Laser Solid Interactions and Transient Thermal Processing of Materials, ed. by Narayan, J., Brown, W. L., and Lemons, R. A., North-Holland, New York (1983).Google Scholar
[3] Bucksbaum, P. H. and Bokor, J., Phys. Rev. Lett. 52, 182 (1984).Google Scholar
[4] Thompson, M. O., Galvin, G. J., Mayer, J. W., Peercy, P. S., Poate, J. M., Jacobson, D. C., Cullis, A. G., and Chew, N. G., Phys. Rev. Lett. 52, 2360 (1984).Google Scholar
[5] Wood, R. F., Lowndes, D. H., and Narayan, J., p. 141 in Ref. [1].Google Scholar
[6] Spaepen, F. and Turnbull, D., p. 93 in Laser and Electron Beam Processing of Materials, ed. by White, C. W. and Peercy, P. S., Academic Press, New York (1980).Google Scholar
[7] Larson, B. C., White, C. W., Noggle, T. S., Barhorst, J. F., and Mills, D. M., Appl. Phys. Lett. 42, 282 (1983).Google Scholar
[8] Aziz, M. J., private communication of results using the heat-flow program of Thompson, M. O..Google Scholar