Hostname: page-component-8448b6f56d-wq2xx Total loading time: 0 Render date: 2024-04-25T05:02:49.602Z Has data issue: false hasContentIssue false
  • English
  • Français

Non-vacuum Thin-film CIGS Modules

Published online by Cambridge University Press:  01 February 2011

Chris Eberspacher ,
Karen L. Pauls  and
John P. Serra
Chris Eberspacher
Affiliation:
Unisun Camarillo, CA 91320 USA
Karen L. Pauls
Affiliation:
Unisun Camarillo, CA 91320 USA
John P. Serra
Affiliation:
Unisun Camarillo, CA 91320 USA
Get access

Abstract

Non-vacuum techniques have been used to deposit coatings of copper indium gallium selenide (CIGS) and metal oxide transparent conductors useful for fabricating thin-film photovoltaic modules. Coatings are formed from nanoparticulate precursor materials using spraying, printing and spin-coating methods. Sprayed layers exhibit non-planar morphologies and low particle packing, and CIGS films made from sprayed precursor layers exhibit related non-planar morphologies and residual void space. The surface roughness of spray-derived CIGS films reduces the sheet conductance of overlying coatings; thin coatings of transparent conductors deposited on rough CIGS films exhibit sheet resistances up to two orders of magnitude higher than equivalent coatings on planar surfaces. Slurry additives can improve layer morphology and sintered film properties, but organic additives can leave carbon contamination of the sintered CIGS films. The fabrication of multi-cell modules imposes additional constraints on transparent conductor sheet conductance.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 763: Symposium B – Compound Semiconductor Photovoltaics , 2003 , B8.27
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Eberspacher, C. et al., 2nd World Conf. Photovoltaic Solar Energy Conversion, Vienna (1998) 303.Google Scholar
2. Fredric, C. et al., NCPV Program Review Meeting, Denver (1998) 158.Google Scholar
3. Eberspacher, C. et al., ‘Non-vacuum Techniques for Fabricating Thin-film CIGS,’ 28th IEEE Photovoltaic Specialists Conference, Anchorage, Sept. 2000.Google Scholar
4. Eberspacher, C. et al., ‘Non-vacuum, Particle-based Processes for CuInSe2 Photovoltaics,’ NCPV Photovoltaics Program Review, 2000, pp. 253–254 Google Scholar
5.US Patent No. 6, 268, 014, ‘Method for Forming Solar Cell Materials From Particulates.’Google Scholar
6. Eberspacher, C. et al., ‘Non-vacuum Processing of CIGS Solar Cells,’ 29th IEEE Photovoltaic Specialists Conference, New Orleans, May 2002.Google Scholar