Hostname: page-component-8448b6f56d-tj2md Total loading time: 0 Render date: 2024-04-25T00:03:53.742Z Has data issue: false hasContentIssue false
  • English
  • Français

Non-Destructive Measurement of the Density of Thin Coatings by a Combination of Instrumented (Nano) Indentation and Acoustical Techniques.

Published online by Cambridge University Press:  01 February 2011

Nigel M. Jennett ,
Giles Aldrich-Smith  and
Antony S. Maxwell
Nigel M. Jennett
Affiliation:
National Physical Laboratory, Teddington, Middlesex, TW11 0LW, U.K.
Giles Aldrich-Smith
Affiliation:
National Physical Laboratory, Teddington, Middlesex, TW11 0LW, U.K.
Antony S. Maxwell
Affiliation:
National Physical Laboratory, Teddington, Middlesex, TW11 0LW, U.K.
Get access

Abstract

Nanoindentation is used to provide a measurement of coating plain strain modulus. The coating properties are then measured by surface acoustic wave spectroscopy (SAWS). It is shown that, by exploiting the relative insensitivity of the SAWS acoustical model to Poisson's ratio, it is possible to measure either the thickness or the density of a thin coating given the input of the other. Furthermore, the indentation and acoustical tests are non-destructive and the resulting value of thickness or density is of high precision. A case study is presented for the measurement of density for a 250 nm thick nano-crystalline Niobium coating on a Si (001) substrate. The density is found to be ρ = 8.4 ± 0.3 g cm−3, about 2 % below bulk values but the modulus is found to be only 85 GPa (for a Poisson's ratio of 0.4), which is 18 % below bulk.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 841: Symposium R – Fundamentals of Nanoindentation and Nanotribology III , 2004 , R12.8
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Jennett, N.M. et al. “European Project INDICOAT SMT-CT98–2249 Final Report Determination of Hardness and Modulus of Thin Films and Coatings by Nanoindentation”, NPL Report MATC (A) 24, (May 2001).Google Scholar
2. Jennett, N.M., Aldrich-Smith, G. and Maxwell, A.S. J. Mater. Res. Vol. 19, No. 1, pp.143–148, (Jan 2004).Google Scholar
3. Farnell, G.W. and Adler, E.L., in: Mason, W.P., Thurston, R.N. (Eds.), Physical Acoustics, Vol. IX, Academic Press, New York, pp.35–126, (1972).Google Scholar
4. Hurley, D.C., Tewary, V.K. and Richards, A.J., Meas. Sci. Technol. 12, pp.1486–1494, (2001).Google Scholar
5. Hurley, D.C., Tewary, V.K. and Richards, A.J., Thin Solid Films 398–399, pp.326–330, (2001).Google Scholar
6. Tewary, V.K., J. Acoust. Soc. Am. 112(3) pt1, pp.925–935, (Sept. 2002).Google Scholar
7. Schneider, D. and Schwarz, Th., Surface and Coating Technology 91, 136 (1997).Google Scholar
8. Schneider, D., Schwarz, Th., Scheibe, H.-J., Panzner, M., Thin Solid Films 295, 107 (1997).Google Scholar
9. Schneider, D., Meyer, C. F., Mai, H., Schöneich, B., Ziegele, H., Scheibe, H. J., and Lifshitz, Y., Diamond and Related Materials 7, 973 (1998).Google Scholar
10. Jennett, N.M. and Bushby, A.J. in Thin Films: Stress and Mechanical Properties IX, edited by Ozkan, C.S., Freund, L.B., Cammarata, R.C., and Gao, H. (Mater. Res. Soc. Proc. 695, Warrendale, 2002) pp.73–78.Google Scholar
11. BS EN ISO 14577:2002 parts 1–3, “Metallic materials – Instrumented indentation test for hardness and materials parameters.”Google Scholar
12. Hurley, D.C., Geiss, R. H., Kopycinska-Müller, M., Müller, J., Read, D. T., Wright, J. E., Jennett, N. M. and Maxwell, A. S. “Anisotropic Elastic Properties of Nanocrystalline Nickel Thin Films” (submitted to J. Mater. Res. for publication).Google Scholar