Hostname: page-component-77c89778f8-vsgnj Total loading time: 0 Render date: 2024-07-18T12:11:39.587Z Has data issue: false hasContentIssue false
  • English
  • Français

Nanometer-Scale Investigation of Al-Based Alloy Films for Thin-Film Transistor Liquid Crystal Display Arrays

Published online by Cambridge University Press:  10 February 2011

H. Takatsuji ,
Hideo Iiyori ,
S. Tsuji ,
K. Tsujimoto ,
K. Kuroda  and
H. Saka
H. Takatsuji
Affiliation:
IBM Japan Ltd., Display Technology, Yasu-cho, Yasu-gun, Shiga 520–23, Japan
Hideo Iiyori
Affiliation:
IBM Japan Ltd., Display Technology, Yamato-shi, Kanagawa 242, Japan
S. Tsuji
Affiliation:
IBM Japan Ltd., Display Technology, Yamato-shi, Kanagawa 242, Japan
K. Tsujimoto
Affiliation:
ITES Co., Yasu-cho, Yasu-gun, Shiga 520–23, Japan
K. Kuroda
Affiliation:
Department of Quantum Engineering, Nagoya University, Nagoya 464–01, Japan
H. Saka
Affiliation:
Department of Quantum Engineering, Nagoya University, Nagoya 464–01, Japan
Get access

Abstract

Annealing effects on Al-Nd (0.19 – 1.82 at. %) thin films deposited on a glass substrate have been investigated. It is found that the resistivity of an Al-Nd-alloy thin film decreases significantly after annealing at 300 °C or higher temperatures. Using cross-sectional transmission electron microscopy (X-TEM), we have observed segregation of Al-Nd inter-metallic precipitates and pure-Al grains during the annealing. The decrease of the resistivity can be attributed to the segregation. Segregation has been also detected from the increase of diffracted X-ray intensities corresponding to Al-Nd inter-metallic compounds in X-ray diffraction (XRD) analysis. Atomic force microscopy (AFM) observation has revealed that the optimum content ratio of Nd in Al-Nd alloys used as interconnect materials for thin-film-transistor liquid crystal display (TFT/LCD) applications is around 0.97 atomic %.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 471: Symposium G – Flat Panel Display Materials III , 1997 , 99
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Takayama, S. and Tsutsui, N., J. Vac. Sci. Technol. A 14(4), Jul/Aug 1996 Google Scholar
2. Kim, C. W., Jeong, C. O., Song, H. S., Kim, Y. S., Kim, J. H., Choi, J. H., Hur, M. K., Yang, H. G., and Souk, J. H., SID 96 Digest, p. 337 (1996)Google Scholar
3. Takagi, K., Iwamura, E., Ohnishi, T., Yoshikawa, K., ASIA DISPLAY '95, p. 461–464 Google Scholar
4. Iwamura, E., Ohnishi, T., Yoshikawa, K., and Itayama, K., J. Vac. Sci. Technol. A 12(5), Sep/Oct 1994 Google Scholar
5. Joshi, A., Gadner, D., Hu, H. S., Maradinly, A. J., and Nieh, T. G., J. Vac. Sci. Technol. A8(3), May/Jun 1990 Google Scholar
6. “Nanocharacterization of Texture and Hillock Formation in Thin Al and Al-0.2% Cu Films for Thin-Film Transistors”, Takatsuji, H., Tsuji, S., Kitahara, H., Tsujimoto, K., Kuroda, K. and Saka, H., Mat. Res. Soc. Symp. Proc. (To be published 1997).Google Scholar
7. “Binary Alloy Phase Diagrams”, Massalaki, T.B., ed. ASM International, Materials Park, OH (1990).Google Scholar