Hostname: page-component-788cddb947-pt5lt Total loading time: 0 Render date: 2024-10-19T11:50:37.130Z Has data issue: false hasContentIssue false
  • English
  • Français

Microsegregation of an Aluminum and Magnesium Alloy at High Solidification Rates

Published online by Cambridge University Press:  15 February 2011

L.J. Masur ,
J.T. Burke ,
T.Z. Kattamis  and
M.C. Flemings
L.J. Masur
Affiliation:
Massachusetts Institute of Technology, Cambridge, Massachusetts
J.T. Burke
Affiliation:
Massachusetts Institute of Technology, Cambridge, Massachusetts
T.Z. Kattamis
Affiliation:
Massachusetts Institute of Technology, Cambridge, Massachusetts
M.C. Flemings
Affiliation:
Massachusetts Institute of Technology, Cambridge, Massachusetts
Get access

Abstract

Results are presented of an on-going study of structure and solute redistribution in ribbon cast Al-Cu and Mg-Zn alloys. Regions found in these ribbons are (1) an apparently chemically homogeneous coarse-grained zone adjacent the chill, (2) a transition cellular region, and (3) a dendritic zone, usually equiaxed. In both alloys, structure in the equiaxed region becomes coarser with increasing distance from the chill. In Mg-Zn alloys, the amount of nonequilibrium second phase increases essentially linearly with distance in the cellular and dendritic regions. Scanning transmission electron microscopy can accurately measure solute distribution across rapidly solidified cells or dendrites, but the possibility of surface compositional changes during specimen preparation must be recognized.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 8 , 1981 , 185
Copyright
Copyright © Materials Research Society 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Wood, J.H., Mill, P.F., Bingham, J.K. and Bee, J.V., Met. Trans. A, 10A, 575 (1979).10.1007/BF02658320Google Scholar
2.Warrington, D.H., Davies, H.A. and Shohoji, N. in: Proceedings of Fourth International Conference on Rapidly Quenched Metals (Sendai, Japan, 1981).Google Scholar
3.Singh, S.N. and Flemings, M.C., Trans. TMS-AIME, 245, 1803 (1969).Google Scholar
4.Masur, L.J. and Flemings, M.C. in: Proceedings of Fourth International Conference on Rapidly Quenched Metals (Sendai, Japan, 1981).Google Scholar
5.Flemings, M.C., to be presented at 1981 Bilateral USA-China Metallurgical Conference (Peking, China, Nov. 14–22, 1981).Google Scholar
6.Coriell, S.R. and Sekerka, R.F. in: Rapid Solidification Processing: Principles and Technologies II (Claitor's Publishing Division, Baton Rouge, LA, 1980), p. 35.Google Scholar
7.Baker, J.C. and Cahn, J.W., Acta Met., 17, 575 (1969).10.1016/0001-6160(69)90116-3Google Scholar