Hostname: page-component-7479d7b7d-k7p5g Total loading time: 0 Render date: 2024-07-13T15:50:05.298Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Property Determination for Supported Polymer Films using Double Bending Beams

Published online by Cambridge University Press:  25 February 2011

B. J. Han ,
H. M. Tong ,
K. Saenger  and
Carl C. Gryte
B. J. Han
Affiliation:
IBM T. J. Watson Research Center, Yorktown Heights, New York 10598 Department of Chemical Engineering and Applied Chemistry, Columbia University, New York, New York 10027
H. M. Tong
Affiliation:
IBM T. J. Watson Research Center, Yorktown Heights, New York 10598
K. Saenger
Affiliation:
IBM T. J. Watson Research Center, Yorktown Heights, New York 10598
Carl C. Gryte
Affiliation:
Department of Chemical Engineering and Applied Chemistry, Columbia University, New York, New York 10027
Get access

Abstract

A double-bending-beam technique has been developed to determine the mechanical properties (e.g., the elastic stiffness parameter and the in-plane coefficient of thermal expansion) of thin polymer films during thermal cycling. The mechanical properties of poly(methyl methacrylate) and a polyimide have been determined from the combined stress-temperature relationships of identical polymer films coated on two rigid beams (each with a distinctly different Young's modulus and coefficient of thermal expansion). The measured mechanical properties were found to agree with data obtained using conventional techniques. The double-bending-beam technique can be applied to a wide variety of dry and wet processing situations involving thin polymer films.

Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 76: Symposium C – Science and Technology of Microfabrication , 1986 , 123
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Campbell, D. S., Thin Film Technology Handbook, edited by Maisseland, L. I. and Glang, R. (McGraw-Hill, New York, 1970) Chap. 12.Google Scholar
2. Tong, H. M., Hu, C. -K., Feger, C. and Ho, P. S., Polymer Eng. Sci., 26, 1213 (1986).CrossRefGoogle Scholar
3. Retajczyk, T. F. Jr. and Sinha, A. K., Appl. Phys. Left., 36, 162 (1980); Thin Solid Films 70, 241–247 (1980).CrossRefGoogle Scholar
4. American Institute of Physics Handbook, 3rd Ed. (McGraw-Hill, New York, 1972).Google Scholar
5. Holdon, R. A. and Simha, R.,J.Appl. Phys., 39, 3, 1890 (1968).Google Scholar
6. Collins, E. A.. Bares, J. and Billmer, F. W. Jr., Experiments in Polymer Science (Wiley, New York, 1973).Google Scholar