Hostname: page-component-7bb8b95d7b-qxsvm Total loading time: 0 Render date: 2024-09-27T02:28:52.784Z Has data issue: false hasContentIssue false
  • English
  • Français

Ion Implantation as a Tool for Improving the Properties of Orthopardic Alloys

Published online by Cambridge University Press:  22 February 2011

P. A. Higham
P. A. Higham*
Affiliation:
Howmedica, 359 Veterans Boulevard, Rutherford, NJ 07070
Get access

Abstract

Ion Implantation is emerging as a specialized surface treatment method by which orthopaedic alloys can be doped in order to modify for corrision, fatigue and wear properties.

In this paper alterations in the corrosion and fatigue resistance of 316LVM stainless steel and Ti 6A1-4V ELI titanium alloy are considered. The effect of various variables was investigated; ion species, flux, accelerating voltage.

Changes in corrosion resistance were monitored by performing anodic polarization studies in deaerated 0.1M NaCi solution at 22°C. The most effective species were found to be tantalum and boron for improvements to stainless steel.

Fatigue properties were investigated using a Wohler type rotating bend test. Preliminary results show that nitrogen ion implantation improved the fatigue life for the steel but not the titanium alloy. Indications were found to suggest that time since implantation affect the fatigue properties.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 55: Symposium G – Biomedical Materials , 1985 , 253
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Williams, J. M., Beardsley, G., Buchanan, R., Bacon, R., Mat. Res. Soc. Symp. Proc. Vol.27, 1984.Google Scholar
2. Sioshansi, P., Thin Solid Films, 118, 1984, 61.CrossRefGoogle Scholar
3. Hu, W. W., Clayton, C. R., Herman, H., Scripta Metallurgica 12, 1978, 697.CrossRefGoogle Scholar
4. Ashworth, V., Grant, W.A. et al, in Ion Implantation Metallurgy, ed. By Preece, C. M., Hirvonen, J. K., Metallurgical Society of AIME, 1980.Google Scholar
5. Hartley, N., in Applications of Ion Beams to Materials, ed. Carter, G., Inst. of Physics, London, 1976.Google Scholar
6. Vardiman, R. G., Kant, R. A., J. Appl. Phys. 53, 1982, 690.CrossRefGoogle Scholar