Hostname: page-component-7c8c6479df-8mjnm Total loading time: 0 Render date: 2024-03-29T01:11:48.968Z Has data issue: false hasContentIssue false

Interactions of Simulated High Level Waste (HLW) Calcine with Alkali Borosilicate Glass

Published online by Cambridge University Press:  01 February 2011

S. Morgan
Affiliation:
Immobilisation Science Laboratory, University of Sheffield, Mappin St, Sheffield, S1 3JD, UK
R. J. Hand
Affiliation:
Immobilisation Science Laboratory, University of Sheffield, Mappin St, Sheffield, S1 3JD, UK
N. C. Hyatt
Affiliation:
Immobilisation Science Laboratory, University of Sheffield, Mappin St, Sheffield, S1 3JD, UK
W. E. Lee
Affiliation:
Immobilisation Science Laboratory, University of Sheffield, Mappin St, Sheffield, S1 3JD, UK
Get access

Abstract

This study looks at the interactions between simulated calcined high level waste from fuel reprocessing and mixed alkali borosilicate glass frit in the early stages of melting, and the possibility of the formation of yellow phase during these stages. Simulant “calcine” from a full scale inactive trial (Magnox: oxide “blend” 25:75) was pre-mixed with alkali borosilicate glass, to achieve a 25wt% waste loading, and melted at 1050°C at various times. It is shown that dissolution occurs in two separate stages; the first involves formation of a low density CsLiMoO4 fluid, which separates and forms a yellow/green layer on the surface of the melt, accompanied by some dissolution of rare- earth elements (Nd, Ce, Gd) and Zr from the waste into the glass matrix. The second stage entails more extensive migration of these rare-earth elements into the glass, and the disappearance of the surface layer on the melt. The glass appears more homogenized at the later stages of melting, but still contains undissolved particles of calcine after 16 minutes.

Type
Research Article
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Lutze, W., Silicate Glasses in Radioactive Wasteforms for the Future, edited by Lutze, W., Ewing, R.C. (North Holland, Amsterdam, 1988), pp1192.Google Scholar
2. Roth, G. and Weisenburger, S., Nuc. Eng. Design 202 pp 197207 (2000).Google Scholar
3. Hutson, G. V., Waste Treatment - Chapter 9, The Nuclear Fuel Cycle, edited by Wilson, P.D., (Oxford University Press, Oxford, UK, 1996)Google Scholar
4. Cotton, F.A., Wilkinson, G. Advanced Inorganic Chemistry 5th ed. (Wiley, New York, 1988)Google Scholar
5. Morgan, S., Rose, P. B., Hand, R. J., Hyatt, N. C., Lee, W. E. The Characterisation and Dissolution of High Level Waste calcine in alkali borosilicate glass Accepted for publication in Ceramic Transactions Proc. Symp. 26 “Ceramic Science and Technology for the Nuclear Industry” The American Ceramic Society 105th meeting, Nashville, Tennessee, 2003,Google Scholar
6. Carter, M., Vance, E., Li, H., Hollandite-Rich Ceramic Melts To be published in Ceramic Transactions Proc. Symp. 25 “Science and Technology in Addressing Environmental Issues in the Ceramic Industry” in The American Ceramic Society 105th meeting, Nashville, Tennessee, 2003 Google Scholar