Hostname: page-component-848d4c4894-jbqgn Total loading time: 0 Render date: 2024-06-20T13:23:56.935Z Has data issue: false hasContentIssue false
  • English
  • Français

Influence of HCL on Rapid Thermal Oxides

Published online by Cambridge University Press:  10 February 2011

G. A. Hames ,
S. E. Beck ,
A. G. Gilicinski ,
W. K. Henson  and
J. J. Wortman
G. A. Hames
Affiliation:
Texas Instruments, Inc., 13536 N. Central Expressway, Dallas, TX, 75248
S. E. Beck
Affiliation:
Air Products and Chemicals, Inc., 7201 Hamilton Blvd., Allentown, PA, 18195
A. G. Gilicinski
Affiliation:
Air Products and Chemicals, Inc., 7201 Hamilton Blvd., Allentown, PA, 18195
W. K. Henson
Affiliation:
North Carolina State University, Electrical and Computer Engineering, Raleigh, NC, 27695
J. J. Wortman
Affiliation:
North Carolina State University, Electrical and Computer Engineering, Raleigh, NC, 27695
Get access

Abstract

The influence of HCl on the quality of gate oxides grown by rapid thermal oxidation has been investigated. HCl was added to oxidation ambient for some rapid thermal oxides while for others the silicon surface was annealed in a partial HCl ambient prior to rapid thermal oxidation. Improvements in gate oxide integrity were monitored on MOS capacitors and MOSFET devices by I-V and C-V testing. The levels of chlorine incorporated in the oxide from the addition of HCl to the process was measured by secondary ion mass spectroscopy. Atomic force microscopy was performed to measure surface roughening during HCl pre-oxidation treatments.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 429: Symposium N – Rapid Thermal and Integrated Processing V , 1996 , 219
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Henley, W., Jastrebski, L. and Haddad, N., Proc. of the MRS Soc. Symposia, Spring Mtg., (1992).Google Scholar
2 Meuris, M., Hasenack, C., DeKeersmaecker, R. and Falster, R., Proc. of Electrochem. Soc. Mtg., Fall Meeting (1989)Google Scholar
3 Singh, B. R. and Balk, P., J. Electrochemical Soc., vol.125, no. 3, (1978), pp. 453–461.Google Scholar
4 Cosway, R. G. and Wu, Schyi-yi (C.-E.), J Electrochemical Soc., vol.132, no. 1, (1985), pp. 151–154.Google Scholar
5 Monkowski, J., Solid State Technol., (July 1979), pp. 113–119.Google Scholar
6 Nulman, J., Materials Research Soc. Symp. Proc., vol.92, (1986), pp. 141–146.Google Scholar
7 Barlow, K. and Nayar, V., Proc. of Insulating Films on Semiconductors, Sec. 2, (1991), pp. 171–174.Google Scholar
8 Fukuda, H., Arakawa, T. and Ohno, S., IEEE Trans. on Electron Devices, vol.39, no. 1, (1992), pp. 127–133.Google Scholar
9 Meuris, M., Vehaverbeke, S, Mertens, P. W., Heyns, M. M., Hellemans, L., Bruyseraede, and Phillipssian, A., Jpn. J Appl. Phys. Pt. 2, vol.31, no.-11A(1992) pp.L1514–L1517.Google Scholar