Hostname: page-component-8448b6f56d-t5pn6 Total loading time: 0 Render date: 2024-04-24T02:27:48.161Z Has data issue: false hasContentIssue false
  • English
  • Français

Induced Magnetic Anisotropy of Sputter NiFe Thin Films on Thin Tantalum Nitride Underlayer

Published online by Cambridge University Press:  15 February 2011

T. Yeh ,
L. Berg ,
J. Falenschek  and
J. Yue
T. Yeh
Affiliation:
Solid State Electronics Center, Honeywell Inc. 12001 State Highway 55, Plymouth, MN 55441, U.S.A
L. Berg
Affiliation:
Solid State Electronics Center, Honeywell Inc. 12001 State Highway 55, Plymouth, MN 55441, U.S.A
J. Falenschek
Affiliation:
Solid State Electronics Center, Honeywell Inc. 12001 State Highway 55, Plymouth, MN 55441, U.S.A
J. Yue
Affiliation:
Solid State Electronics Center, Honeywell Inc. 12001 State Highway 55, Plymouth, MN 55441, U.S.A
Get access

Abstract

The structure and properties of sputter NiFe thin film deposited on both thermal oxide and thin tantalum nitride have been studied. The magnetic anisotropy field HK increases to 8.2 Oe when the NiFe film was deposited on a thin tantalum nitride underlayer. Anisotropic stress was found on the sample film with tantalum nitride underlayer. Results of X-ray diffraction show that a thin tantalum nitride underlayer appears to promote a preferred crystalline orientation formation of the NiFe film. The induced magnetic anisotropy is attributed to the formation of the preferred crystalline orientation and the induced anisotropic magnetoelastic energy which is associated with the anisotropic stress of the sample film.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 384: Symposium L – Magnetic Ultrathin films, Multilayers and Surfaces , 1995 , 233
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Cullity, B. D., Introduction to Magnetic Materials, 2nd ed. (Addison-Wesley, Reading, MA, 1972) p. 226–275 Google Scholar
2. Chen, G., IEEE Trans. on Magnetics, MAG–22, No.5, 334 (1986)Google Scholar
3. Fisher, R. D., Allan, J. C., and Pressesky, J. L., IEEE Trans. on Magnetics, MAG–22, No.5, 352 (1986)Google Scholar
4. Allan, J. C. and Fisher, R. D., IEEE Trans. on Magnetics, MAG–23, 112 (1986)Google Scholar
5. Lin, J., Wu, C., and Sivertsen, J. M., IEEE Trans. on Magnetics, MAG–26, No.1, 39–41 (1990)Google Scholar
6. Yeh, T., Sivertsen, J. M., and Judy, J. H., IEEE Trans. on Magnetics, MAG–26, No.5, 1590–1592 (1990)Google Scholar
7. Yeh, T., PhD thesis, University of Minnesota, 1992 Google Scholar
8. Yelon, A., Physics of Thin Film, 6, 238 (1971)Google Scholar