Hostname: page-component-848d4c4894-nmvwc Total loading time: 0 Render date: 2024-06-20T08:51:47.328Z Has data issue: false hasContentIssue false
  • English
  • Français

High Resolution Transmission Electron Microscopy of Defect Clusters in Aluminum During Electron and Ion Irradiation at Room Temperature

Published online by Cambridge University Press:  15 February 2011

Kazuo Furuya ,
Min Piao ,
Nobuhiro Ishikawa  and
Tetsuya Saito
Kazuo Furuya
Affiliation:
National Research Institute for Metals, 3-13 Sakura, Tsukuba, 305 Japan, furukaz@nrim.go.jp
Min Piao
Affiliation:
National Research Institute for Metals, 3-13 Sakura, Tsukuba, 305 Japan, furukaz@nrim.go.jp
Nobuhiro Ishikawa
Affiliation:
National Research Institute for Metals, 3-13 Sakura, Tsukuba, 305 Japan, furukaz@nrim.go.jp
Tetsuya Saito
Affiliation:
National Research Institute for Metals, 3-13 Sakura, Tsukuba, 305 Japan, furukaz@nrim.go.jp
Get access

Abstract

Defect clusters in Al during electron and ion irradiation have been investigated using highresolution transmission electron microscopy (HRTEM). An ION/HVEM system which consists of a high-voltage TEM and ion implanters was used for in-situ observation of damage evolution under 1000 keV electrons and 15 keV He+ irradiation at room temperature. HRTEM of Al in [110] orientation showed many planar defects along { 111 } planes during electron irradiation, while a high density of small polyhedron-shaped cavities (He-bubbles) was observed in addition to the planar defects after He+ irradiation. Multi-slice image simulation of various models of dislocation loops indicated the planar defect as an interstitial-type Frank loop.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 439: Symposium B – Microstructure Evolution During Irradiation , 1996 , 331
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Kiritani, M., J. Nucl. Mater. 216, 113 (1994)Google Scholar
[2] King, M. L., Jenkins, M. L., Kirk, M. A. and English, C. A., Proc. 15 Int. Symp. on Effects of Irradia. on Mater. ASTM-STP 1125, 448 (1992)Google Scholar
[31] Furuya, K., Osaki, M., Hagiwara, S. and Saito, T., in Proc. Microscopy & Microanalysis 95, 292 (1995)Google Scholar
[4] Ziegler, J. F., Biersack, J. P. and Littmark, U., The stopping and range of ions in soilds, edited by Ziegler, J. F. (Pergamon Press, New York, 1985)Google Scholar
[5] Kiritani, M., Point Defects and Defect Interations in Metals, edited by Takamura, J., et al. (U of Tokyo Press, Tokyo, 1982), p.59.Google Scholar
[6] Furuno, S., Hojou, K., Izui, K., Kamigaki, N. and Kino, T., J. Nucl. Mater. 155–157 1149 (1988)Google Scholar
[7] Mills, M. J., Daw, M. S. and Foiles, S. M., Ultramicroscopy, 56, 79 (1994)Google Scholar
[8] Shimomura, Y., Guainan, M. W. and Rubia, T. D. de la, J. Nucl. Mater. 205, 374 (1993)Google Scholar