Hostname: page-component-8448b6f56d-sxzjt Total loading time: 0 Render date: 2024-04-16T18:54:11.221Z Has data issue: false hasContentIssue false
  • English
  • Français

Fracture and Abrasion Resistance Tests for Optical Fiber Coatings

Published online by Cambridge University Press:  10 February 2011

D. J. Wissuchek ,
D. J. Walter ,
D. A. Clark  and
G. S. Glaesemann
D. J. Wissuchek
Affiliation:
Coming Incorporated, SPDVO18, Coming, NY 14831
D. J. Walter
Affiliation:
Coming Incorporated, SPDVO18, Coming, NY 14831
D. A. Clark
Affiliation:
Coming Incorporated, SPDVO18, Coming, NY 14831
G. S. Glaesemann
Affiliation:
Coming Incorporated, SPDVO18, Coming, NY 14831
Get access

Abstract

The properties of the optical fiber buffer coating play a critical role in the strength and handleability of optical fibers. Tests have been developed to measure a coating's resistance to mechanical damage. Two such tests are described here. The indentation rupture test involves indenting coated fiber with diamond pyramids and measuring the load at which the pyramid punctures the coating. Finite element analysis is used to determine the strain energy absorbed by plastic deformation of the coating. The toughness of the outer coating layer and the toughness of the inner coating/glass interface can be determined from the crack dimensions produced during rupture of the coating. Strength after mechanical abrasion is a procedure wherein a hollow tube of coating is removed from an optical fiber and subsequently bombarded with an abrasive grit. The effects of the abrasion event are measured by a tensile test of the tube. Results for both tests are obtained for two coating systems. The validity of the tests for measuring coating properties is discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 531: Symposium DD – Reliabilty of Photonics Materials & Structures , 1998 , 309
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. ASTM STP 463 249, (1970)Google Scholar
2. Begley, J. A., and Landes, J. D., ASTM STP 514, 1–20, (1972)Google Scholar
3. Lawn, B. R., Fracture of Brittle Solids 2nd ed., (Cambridge Press, Cambridge, 1993) p. 271 Google Scholar
4. Lawn, B. R., Evans, A. G., and Marshall, D. B., J. Amer. Ceram. Soc. 63, 574 (1980)Google Scholar
5. Antis, G. R., Chantikul, P., Lawn, B. R., and Marshall, D. B., J. Amer. Ceram. Soc. 64, 533, (1981)Google Scholar
6. Matthewson, M. J., Appl. Phys. Let. 49 (21), 1426 (1986)Google Scholar
7. Lin, M.R., Ritter, J. E., Rosenfeld, L., and Lardner, T. J., J. Mater. Res. 5(5), 204 (1990)Google Scholar
8. Bothelo, J. W., OFC Technical Digest 8, 265, (1995)Google Scholar
9. Williams, J. G., Fracture Mechanics of Polymers, (J. Wiley and Sons, New York, 1987) p. 175 Google Scholar