Hostname: page-component-7bb8b95d7b-dtkg6 Total loading time: 0 Render date: 2024-09-26T03:11:54.933Z Has data issue: false hasContentIssue false
  • English
  • Français

Formation of Submicron Metastable Phase Structures in Alloys with Focused Electron or Proton Beams

Published online by Cambridge University Press:  28 February 2011

N. Q. Lam ,
P. R. Okamoto  and
G. K. Leaf
N. Q. Lam
Affiliation:
Argonne National Laboratory, 9700 S. Cass Ave., Argonne, IL 60439
P. R. Okamoto
Affiliation:
Argonne National Laboratory, 9700 S. Cass Ave., Argonne, IL 60439
G. K. Leaf
Affiliation:
Argonne National Laboratory, 9700 S. Cass Ave., Argonne, IL 60439
Get access

Abstract

Recent theoretical and experimental studies of radiation-induced segregation in alloys under irradiation with focused charged-particle beams have shown that point-defect currents generated by axial and radial displacement-rate gradients can cause significant redistribution of the alloying elements within the irradiated zone. In the case of irradiation of thin films with highly-focused electron beams, two important features have been established experimentally: (i) the diameter of the local region in which the alloy composition and phase are modified is practically equal to the beam diameter, and (ii) the time required to produce a given change in the alloy composition in the center of the irradiated zone decreases rapidly with beam diameter. Our theoretical modeling indicates that these features will also be observed in semi-infinite alloys bombarded with focused proton beams. However, in this case, the spatially-nonuniform defect production in both the axial and radial directions renders the compositional redistribution more complex. The present work shows that the ability to locally modify the alloy composition by focused electron or proton beams may offer a new method for producing local regions of controlled composition and microstructure on a submicron scale. The results of our model calculations and experimental studies will be presented to demonstrate the feasibility of this novel technique.

Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 74: Symposium A – Beam-Solid Interactions and Transient Processes , 1986 , 523
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Holland, J. R., Mansur, L. K. and Potter, D. I. (eds.), Phase Stability during Irradiation (American Institute of Mining, Metallurgical and Petroleum Engineers, New York, 1981).Google Scholar
2. Nolfi, F. V. (ed.), Phase Transformations during Irradiation (Applied Science Publishers, London, 1983).Google Scholar
3. Lam, N. Q., Leaf, G. K. and Minkoff, M., J. Nucl. Mater. 118, 248 (1983).CrossRefGoogle Scholar
4. Okamoto, P. R. and Lam, N. Q., Mat. Res. Soc. Symp. Proc. 41, 241 (1985).Google Scholar
5. Lam, N. Q. and Okamoto, P. R., in: Solute-Defect Interactions: Theory and Experiment, Saimoto, S. et al., eds. (Pergamon Press, Toronto, 1986) p. 307.Google Scholar
6. Ardell, A. J. and Nicholson, R. B., Acta. Metall. 14, 1295 (1966).CrossRefGoogle Scholar
7. Leaf, G. K. and Minkoff, M., in: Advances in Computer Methods for Partial Differential Equations - IV, Vichnevetsky, R. and Stepleman, R. S., eds. (IAMCS, Rutgers University, N.J., 1981) p. 343.Google Scholar