Hostname: page-component-848d4c4894-2xdlg Total loading time: 0 Render date: 2024-06-24T21:05:22.339Z Has data issue: false hasContentIssue false
  • English
  • Français

Fatigue Crack Growth In Niobium Aluminide Intermetallics

Published online by Cambridge University Press:  22 February 2011

Jeff Dipasquale ,
David Gahutu ,
Doug Konitzer  and
Wole Soboyejo
Jeff Dipasquale
Affiliation:
The Ohio State University, Dept. of Materials Science and Engineering, 2041 College Road, Columbus, OH 43210
David Gahutu
Affiliation:
The Ohio State University, Dept. of Materials Science and Engineering, 2041 College Road, Columbus, OH 43210
Doug Konitzer
Affiliation:
General Electric Aircraft Engines, 1 Neumann Way, Cincinnati, OH 45215–6301
Wole Soboyejo
Affiliation:
The Ohio State University, Dept. of Materials Science and Engineering, 2041 College Road, Columbus, OH 43210
Get access

Abstract

The results of a recent study of the fatigue crack growth in a new class of niobium aluminide (Nb3Al) intermetallics alloyed with various levels of Ti are presented. The alloys studied have the following nominal compositions (note that all compositions are quoted in atomic &): Nb-15Al-10Ti(10Ti alloy), Nb-15Al-25Ti(25Ti alloy), Nb-15Al-40Ti(40Ti alloy) and Nb-12.5A1–41Ti-1.5Mo(41Ti alloy). Fatigue crack growth behavior was studied at room-temperature in all the alloys. Fracture mechanisms were determined by inspection of SEM images of fracture surfaces. Faceted cleavage fracture modes were apparent on the lOTi and 25Ti alloys. The 40Ti and 41Ti alloys exhibited clear evidence of ductile dimpled fracture. The ductile 40Ti and 41Ti alloys are shown to have comparable or better fatigue crack growth resistance than mill annealed Ti-6A1–4V. The effects of crack orientation (relative to elongated grains) on the fatigue crack growth behavior of the 41Ti alloy are also discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 364: Symposium L – High-Temperature Ordered Intermetallic Alloys–VI , 1994 , 1347
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Hou, D.H., Shyue, J., Yang, S.S. and Fraser, H.L., in Alloy Modeling and Design, edited by Stocks, G.M. and Turch, P.Z.A. (TMS 1994), p. 291.Google Scholar
2. von Mises, R., Angew, Z.. Math. Mech., 8, 161 (1928).Google Scholar
3. Suresh, S. and Brockenbrough, J.R., Acta Metall., 36, 1444–1470 (1988).Google Scholar
4. Shyue, J., Hou, D.H., Johnson, S.C. and Fraser, H.L., in “Structural Intermetallics”, Eds. Darolia, R. et al., Inter. Symp. Structural Intermetallics (Champion, PA, 1993) pp. 631–635.Google Scholar
5. Austin, C.M., Dobbs, J.R., Fraser, H.L., Konitzer, D.G., Miller, D.J., Parks, M.J., Schaeffer, J.C. and Sears, J.W., Report No. WL-TR-93–4059.Google Scholar
6. Soboyejo, W.O., Rao, K.T.V, Sastry, S.M.L. & Ritchie, R.O., Met. Trans., 24A, 585–600 (1993).Google Scholar