Hostname: page-component-7479d7b7d-c9gpj Total loading time: 0 Render date: 2024-07-10T23:32:37.788Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication and Mechanical Properties of Ni3Al-Al2O3 Composites

Published online by Cambridge University Press:  26 February 2011

C. G. McKamey ,
G. L. Povirk ,
J. A. Horton ,
T. N. Tiegs  and
E. K. Ohriner
C. G. McKamey
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831
G. L. Povirk
Affiliation:
Brown University, Providence, RI 02912
J. A. Horton
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831
T. N. Tiegs
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831
E. K. Ohriner
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831
Get access

Abstract

The objective of this study is to develop a metal-matrix composite based on the intermetallic alloy Ni3Al reinforced with Al2O3 fibers, with improved high-temperature strength and lower density compared to the matrix material. This paper summarizes results of initial fabrication and mechanical tests on specimens produced using IC-15 [Ni-24% Al-0.24% B (at.%)] and IC-218 [Ni-16.5% Al-8% Cr-0.4% Zr-0.1% B (at.%)], with 20 vol. % Al2O3 fibers. Fabrication methods include both hot-pressing and hot-extrusion. Mechanical tests include four-point bending and tensile tests. The integrity of the fiber-matrix interface was studied and correlated with mechanical properties. Tensile ductilities of approximately 10% at room temperature were achieved for Ni3Al/Al2O3 composites with controlled material processing and interfacial structure. Fabrication of composites by hot-extrusion produced better tensile properties at room temperature, but superplastic behavior (i.e., low strengths, high ductilities) at 1000°C.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 133: Symposium H – High-Temperature Ordered Intermetallic Alloys III , 1988 , 609
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Nair, S. V., Tien, J. K., and Bates, R. C., Int. Metal Rev. 30, 275 (1985).Google Scholar
2. Liu, C. T., White, C. L., and Horton, J. A., Acta Metall. 33, 213 (1985).Google Scholar
3. Liu, C. T., Proc. Micon 1986 Symposium, (ASTM, Feb. 1988), p. 222.Google Scholar
4. Nourbakhsh, S., Liang, F. L., and Margolin, H., to be published in Advanced Manufacturing Process.Google Scholar
5. Tiegs, T. N., unpublished results.Google Scholar
6. Povirk, G. L., Horton, J. A., McKamey, C. G., Tiegs, T. N., and Null, S. R., to be published in J. Mater. Sci.Google Scholar
7. 3. Horton, A., Cathcart, J. V., and Liu, C. T., Oxid. Met. 29, 347 (1988).CrossRefGoogle Scholar
8. Sikka, V. K. and Loris, E. A., Nickel Metallurgy. Vol. 2, Industrial Applications of Nickel, (Canadian Institute of Mining and Metallurgy, Montreal, Canada, 1986), p. 293.Google Scholar
9. Sikka, V. K., Advanced Materials and Processing Techniques for Structural Applications, Proceedings of First ASM Europe Technical Conference, Paris, 1987, to be published.Google Scholar