Hostname: page-component-8448b6f56d-wq2xx Total loading time: 0 Render date: 2024-04-24T12:49:55.468Z Has data issue: false hasContentIssue false
  • English
  • Français

Evidence by Hrem of Interfacial Modification Induced by Equilibrium Segregation in GE(S) Bicrystal

Published online by Cambridge University Press:  21 February 2011

A. Charai  and
J.L. Rouviere
A. Charai
Affiliation:
Laboratoire de Mdtallurgie, CNRS URA 443, Faculté des Sciences et Techniques de St Jérôme, 13397 Marseille Cedex 20, France
J.L. Rouviere
Affiliation:
Département de Recherche Fondamentale sur la Matière Condensée, SP2/S, CENG, 85X-38041 Grenoble, France
Get access

Abstract

The structure of a [001] tilt grain boundary Σ=25(710) in germanium was investigated by HREM as prepared and after sulfur segregation. The characterisation of Ge(S) system was performed using techniques such as Auger Electron Spectroscopy, Electron Energy Loss Spectroscopy and radioactive tracer analysis. Before the sulfur introduction, this grain boundary is usually sensitive to the preferential etching during the TEM sample preparation which makes the observation difficult. This effect, depending on experimental conditions, can either partially or completely disappear. The interfacial structure as prepared and after annealing under argon or under hydrogen atmosphere can be described as a stacking of several structures with different energies. After sulfur segregation no preferential etching is observed because the lowest energy structure of the as prepared grain boundary is stabilized. The tilt angle and the plane of the grain boundary remain constant.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 319: Symposia CB – Defect-Interface Interactions , 1993 , 417
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Thlbault, J., Rouviere, J. L., Bourret, A.., Materials Science and Technology, 4. (1992), Ed Shroter, W. VCH,323 Google Scholar
2. D'Anterroche, C, PhD, Grenoble (1982)Google Scholar
3. Rouviere, J.L., PhD, Grenoble (1989)CrossRefGoogle Scholar
4. Puteaux, J.L., PhD, Grenoble (1991)Google Scholar
5. Charai, A., Roux, D., Rolland, A, Saindrenan, G., Aufray, B. : J. Phys., 49–C5,, 429.( 1988)Google Scholar
6 Cabané, J., Cabana, F., Equilibrium segregation in metals and non metals-Trans.Tech. Publications(1991) - Ed. Nowotny, J. 1–159,CrossRefGoogle Scholar
7. Hila, J., PhD, Marseille (1993)Google Scholar
8. D'Anterroches, C., Bourret, A. - Phil. Mag., (1984), A49. 783.Google Scholar
9. Rouviere, J.L.. and Bourret, A. in Proc. Int. Symp. on polycrystalline semiconductors, malente, Eds. Möller, H.J., Strunk, H.P. and Werner, J.H., (Springer, Berlin, 1989), 8–19 Google Scholar
10. Kohyama, M. - Phys. Stat. Sol. (B), (1987), 141, 71.Google Scholar
11. Bourret, A., Rouviere, J.L. - Polycristalline Semiconductors, Ed.: WERNER, J.H., Springer-Verlag (1989)Google Scholar
12. Tersoff, J.. Phys. Rev. (1988), B37. 6991.Google Scholar
13. Vitek, V., Wang, Gui Jin, J. Phys., C6 (1982), 147 Google Scholar
14. Sutton, A.P., Vitek, V. : Acta Metall., 30,(1982), 2011 CrossRefGoogle Scholar
15. Nowicki, T.N., Penisson, J.M., Biscondi, M., J. Phys., (1988), 49–C5, 403 Google Scholar