Hostname: page-component-8448b6f56d-t5pn6 Total loading time: 0 Render date: 2024-04-24T16:40:55.544Z Has data issue: false hasContentIssue false

Eutectic Growth in Unidirectionally Solidified Fe-Cr-Ni Alloy

Published online by Cambridge University Press:  10 February 2011

Toshimitsu Okane
Affiliation:
Department of Metallurgy, Graduate School of Engineering, the University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo, 113 JAPAN.
Takateru Umeda
Affiliation:
Department of Metallurgy, Graduate School of Engineering, the University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo, 113 JAPAN.
Get access

Abstract

In this report, transition of solidified phases for directionally solidified Fe-Cr-Ni alloys has been investigated in low growth rate range by using Bridgman type furnace. The ferrite-austenite eutectic growth has been confirmed like a plane front growth of ferrite single phase under low growth rate condition. The transition velocity between eutectic and ferrite cell growth has a good agreement with the result of calculation based on the phase selection criterion and the interface temperature calculation for ferrite, austenite and eutectic phases. These results show that the phase prediction by calculating interface temperature can be applied not only to competitive growth between single phases like peritectic systems, but also to eutectic systems. Furthermore, under the condition of eutectic coupled growth to be occurred in steady state, the changes of solidified phases and their morphologies in the initial transient are discussed.

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Raghavan, V., J. Phase. Equilibria, 15, pp. 534538, (1994)Google Scholar
2. Kerr, H. W., Kurz, W., Int. Mater. Rev., 41, p. 129, (1996)Google Scholar
3. Brooks, J. A., Thompson, A. W., Int. Mater. Rev., 36, (1), pp. 1644, (1991)Google Scholar
4. Umeda, T., Okane, T., Kurz, W., Acta Metall. Mater., 44, pp. 42094216, (1996)Google Scholar
5. Jackson, K. A., Hunt, J. D., Trans. Met. Soc. AIME, 236, pp. 11291142, (1966)Google Scholar
6. MacCartney, D. G., Hunt, J. D., Jordan, R. M., Met. Trans. A, llA p. 1243, (1980)Google Scholar
7. Burden, M. H., Hunt, J. D., J. Cryst. Growth, 22, p. 109, (1974)Google Scholar