Hostname: page-component-848d4c4894-v5vhk Total loading time: 0 Render date: 2024-06-19T21:35:57.073Z Has data issue: false hasContentIssue false
  • English
  • Français

Effects of Ion Metal Plasma (IMP) Titanium Deposition on Ti Silicide Formation

Published online by Cambridge University Press:  10 February 2011

A. Sabbadini ,
F. Cazzaniga ,
M. Brambilla ,
C. Bresolin ,
V. Cusi ,
T. Marangon  and
G. Queirolo
A. Sabbadini
Affiliation:
STMicroelectronics, via Olivetti 2, I-20041 Agrate Brianza (Mi) Italy
F. Cazzaniga
Affiliation:
STMicroelectronics, via Olivetti 2, I-20041 Agrate Brianza (Mi) Italy
M. Brambilla
Affiliation:
STMicroelectronics, via Olivetti 2, I-20041 Agrate Brianza (Mi) Italy
C. Bresolin
Affiliation:
STMicroelectronics, via Olivetti 2, I-20041 Agrate Brianza (Mi) Italy
V. Cusi
Affiliation:
STMicroelectronics, via Olivetti 2, I-20041 Agrate Brianza (Mi) Italy
T. Marangon
Affiliation:
STMicroelectronics, via Olivetti 2, I-20041 Agrate Brianza (Mi) Italy
G. Queirolo
Affiliation:
STMicroelectronics, via Olivetti 2, I-20041 Agrate Brianza (Mi) Italy
Get access

Abstract

Titanium disilicide obtained by direct interaction between Si and a deposited Ti layer is a choice for low- resistance gate interconnections and source and drain areas. The properties of the TiSi2 film can be influenced by many factors; such as substrate nature and doping, the depositing Ti layer, structure dimensions [1][2][3][4]. This work is addressed to study the properties of TiSi2 film as obtained from titanium deposited by Ion Metal Plasma (IMP), which has recently been introduced in high aspect ratio contact and via applications.

Its suitability for titanium silicide formation is investigated here in comparison to standard PVD deposition. The study was carried out on flat and patterned samples. Titanium silicide formed on mono- Si substrates were characterized as a function of RTP temperature in terms of sheet resistance, tilm morphology, crystallography and phase evolution. It was found that the TiSi2 film obtained from IMP- Ti is very similar to the one obtained from PVD standard deposition. However, for annealing below 700°C, an increase in the sheet resistance of the TiSi2 C49 phase from IMP- Ti compared to the one from PVD- Ti was found, and is explained by different silicide grain size. Analyses performed on patterned samples with doped silicon and poly- Si lines show similar electrical results for TiSi2 from IMP and PVD deposition; however, fbr p+ poly-Si lines, the IMP samples displayed correct TiSi2 formation down to 0.18µm line width, while the PVD wafers showed discontinuous results at these minimum feature sizes.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 564: Symposium N – Advanced Interconnects and Contacts , 1999 , 23
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Van den Hove, L. and De Keermaecker, R.F. in “Reduced Thermal Processing for ULSI”, edited by Levy, Roland, Plenum Press, New York, 1988 pp. 53–115 Google Scholar
[2] Maex, K., Materials Science and Engineering,R11 53 (1993).Google Scholar
[3] Clevenger, L.A., Mann, R.W., Roy, R.A., Saenger, K.L., Cabral, C., Piccirillq, J. J. Appl. Phys. 76 (12) 7874 (1994)Google Scholar
[4] Naeem, M.D., Orr-Arienzo, W., Rapp, J., Appl. Phys. Lett. 66 (7), 877 (1995)10.1063/1.113417Google Scholar
[5] Tanaka, Y., Tanimoto, T., Gopalraja, P., Forster, J., Xu, Z., 1997 VMIC Conf. Proc., pp. 437–439 (1997)Google Scholar
[6] Cazzaniga, F. (private communication)Google Scholar
[7] Maex, K. in “Advances in Rapid Thermal and Integrated Processing”, edited by Roozeboom, F., Kluwer Academic Publishers, Dordrecht (NL), 1995 pp. 333–374 Google Scholar