Hostname: page-component-848d4c4894-xfwgj Total loading time: 0 Render date: 2024-07-01T06:47:26.314Z Has data issue: false hasContentIssue false

Effects of Gallium Arsenide Passivation on Scanning Tunneling Microscope Excited Luminescence

Published online by Cambridge University Press:  15 February 2011

E. E. Reuter
Affiliation:
Center for Compound Semiconductor Microelectronics, Beckman Institute, and Dept. of Electrical and Computer Engineering, University of Illinois, Urbana, IL 61801
S. Q. Gu
Affiliation:
Center for Compound Semiconductor Microelectronics, Beckman Institute, and Dept. of Electrical and Computer Engineering, University of Illinois, Urbana, IL 61801
P. W. Bohn
Affiliation:
Center for Compound Semiconductor Microelectronics, Beckman Institute, and Dept. of Electrical and Computer Engineering, University of Illinois, Urbana, IL 61801
J. F. Dorsten
Affiliation:
Center for Compound Semiconductor Microelectronics, Beckman Institute, and Dept. of Electrical and Computer Engineering, University of Illinois, Urbana, IL 61801
G. C. Abeln
Affiliation:
Center for Compound Semiconductor Microelectronics, Beckman Institute, and Dept. of Electrical and Computer Engineering, University of Illinois, Urbana, IL 61801
J. W. Lyding
Affiliation:
Center for Compound Semiconductor Microelectronics, Beckman Institute, and Dept. of Electrical and Computer Engineering, University of Illinois, Urbana, IL 61801
S. G. Bishop
Affiliation:
Center for Compound Semiconductor Microelectronics, Beckman Institute, and Dept. of Electrical and Computer Engineering, University of Illinois, Urbana, IL 61801
Get access

Abstract

An ambient scanning tunneling microscope (STM) was used to excite luminescence in ptype epitaxial GaAs with four separate surface preparations: bare GaAs, Au layer, sulfurmonochloride layer, and one monolayer of octa-decyl-thiol. The STM with tungsten tip was operated at a constant tunnel current of 5 nA during a +1 V bias applied to the sample and the resulting tip to sample distance was fixed during a higher voltage bias pulse which excited luminescence. The luminescence intensity increased rapidly with increasing bias voltage for all passivation types with the octa-decyl-thiol passivation achieving the highest STM excited luminescence (STMEL) of 3500 photons/sec at 4 V bias. Above about 4 V the luminescence from the octa-decyl-thiol and sulfur-monochloride passivated samples fell off irreversibly, indicating that the sample surface had been modified. The Au passivated and unpassivated samples showed no such luminescence drop up to 4.8 V, the highest bias employed. Photoluminescence (PL) studies of the samples showed that PL intensities exhibited a weaker dependence upon passivation type than did STMEL intensities, a result consistent with the assertion that STMEL is more sensitive to the surface properties of the sample than is PL.

Type
Research Article
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Horn, J., Richter, R., Hartnagel, H. L., Sprössler, C. A., Bischoff, M., and Pagnia, H., Mater. Sci. and Eng. B20, 183 (1993).Google Scholar
2 Montelius, Lars, Pistol, Mats-Erik and Samuelson, Lars, Ultramicroscopy 42–44, 210 (1992).Google Scholar
3 Berndt, R., Gaisch, R., Schneider, W. D., Gimzewski, J. K., Reihl, B., Schlittler, R. R., Tschudy, M., Surface Science 307–309, 1033 (1994).Google Scholar
4 Wenderoth, M., Gregor, M. J., and Ulbrich, R. G., Solid State Comm. 83, 535 (1992).Google Scholar
5 Alvarado, S. F., Renaud, Ph., Abraham, D. L., Schtnenberger, Ch., Arent, D. J., and Meier, H. P., J. Vac. Sci. Technol. B 9, 409 (1991).Google Scholar
6 Pfister, M., Johnson, M., Marti, U., Alvarado, S. F., and Salemink, H. W. M., Appl. Phys. Lett. 65, 1168 (1994).Google Scholar
7 Dagata, J. A., Tseng, W., Bennett, J., Schneir, J., and Harary, H. H., Appl. Phys. Lett. 59, 3288 (1991).Google Scholar
8 Li, Z. S., Cai, W. Z., Su, R. Z., Dong, G. S., Huang, D. M., Ding, X. M., Hou, X. Y., and Wang, X., Appl. Phys. Lett. 64, 3425 (1994).Google Scholar
9 Lyding, J. W., Skala, S., Hubacek, J. S., Brockenbrough, R., and Gammie, G., Rev. Sci. Instrum. 59, 1897 (1988).Google Scholar