Hostname: page-component-7c8c6479df-94d59 Total loading time: 0 Render date: 2024-03-19T02:16:20.003Z Has data issue: false hasContentIssue false

Effect of Seawater on Thermal Behavior of Conventional and Nanophased Carbon/Epoxy Composites

Published online by Cambridge University Press:  14 March 2011

Mohammad K Hossain
Affiliation:
Center for Advanced Materials (T-CAM), Tuskegee University 101 Chappie James Center, Tuskegee, AL 36088, U.S.A.
Kazi A Imran
Affiliation:
Center for Advanced Materials (T-CAM), Tuskegee University 101 Chappie James Center, Tuskegee, AL 36088, U.S.A.
Mahesh Hosur
Affiliation:
Center for Advanced Materials (T-CAM), Tuskegee University 101 Chappie James Center, Tuskegee, AL 36088, U.S.A.
Shaik Jeelani
Affiliation:
Center for Advanced Materials (T-CAM), Tuskegee University 101 Chappie James Center, Tuskegee, AL 36088, U.S.A.
Get access

Abstract

The effect of seawater on thermal behavior of conventional and nanophased carbon/epoxy composites was investigated in this study. Composites were fabricated with 1 wt.%, 2 wt.%, and 3 wt.% nanoclay by vacuum assisted resin transfer molding (VARTM) process and compared with neat samples with and without exposure to seawater. Thermal characterization was performed by the dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA). Samples exposed to the seawater for 30- and 60-day periods revealed that samples with nanoclay retained better thermal properties compared to the neat samples. Storage modulus was reduced by 6.28%, 6.76%, 6.15%, and 7.05% for neat, 1 wt.%, 2 wt.%, and 3 wt.% nanoclay infused samples, respectively, after the samples were exposed to seawater for 60 days . From TGA results, it was observed that the thermal stability is not related to nanoclay content and conditoning. Optical microscope (OM) and scanning electron microscope (SEM) studies revealed no significant change in surface morphology in the 30-day conditioning samples.

Type
Articles
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Wood, C.A., and Bradley, W. L., Compos. Sci. Technol. 57, 1033 (1997).Google Scholar
2. Hosur, M.V., Islam, M.M., and Jeelani, S., Mater. Sci. Eng., B 168, 22 (2010).Google Scholar
3. Selzer, R., and Friedrich, K., Compos. Part A 28A, 595 (1997).Google Scholar
4. McEwan, I., Pethrick, R. A., and Shaw, S. J., Polymer 40, 4213 (1999).Google Scholar
5. Hough, J.A., Karad, S.K., and Jones, F.R., Compos. Sci. Technol. 65, 1299 (2005).Google Scholar
6. Bao, L., and Yee, A.F., Polymer 43, 3987 (2002).Google Scholar
7. Rhee, K.Y., Lee, S.M., and Park, S.J., Mater. Sci. Eng., A 384, 308 (2004).Google Scholar
8. Zhou, Y., Parvin, F., Biswas, M.A., Rangari, V. K., and Jeelani, S., Mater. Lett. 60, 869 (2006).Google Scholar
9. Xu, Y. and Hoa, S.V., Compos. Sci. Technol. 68, 854 (2008).Google Scholar
10. Kim, J., Hu, C., Woo, R.S.C., and Sham, M., Compos. Sci. Technol. 65, 805 (2005).Google Scholar
11. Yang, G., Fu, S., and Yang, J., Polymer 48, 302 (2007).Google Scholar
12. Kootsookos, A., and Mouritz, A.P., Compos. Sci. Technol. 64, 1503 (2004).Google Scholar
13. Chowdhury, F.H., Hosur, M.V., and Jeelani, S., Mater. Sci. Eng., A 421, 298 (2006).Google Scholar
14. Magid, B.A., Ziaee, S., Gass, K., and Schneider, M., Compos. Struct. 71, 320 (2005).Google Scholar
15. Zainuddin, S., Hosur, M.V., Zhoua, Y., Kumar, A., and Jeelani, S., Mater. Sci. Eng., A 527, 3091 (2010).Google Scholar