Hostname: page-component-7c8c6479df-ph5wq Total loading time: 0 Render date: 2024-03-29T12:37:44.478Z Has data issue: false hasContentIssue false

Dye Sensitized Solar Cells Using Nanostructured Thin Films of Titanium Dioxide

Published online by Cambridge University Press:  01 February 2011

Douglas A. Gish
Affiliation:
Department of Electrical and Computer Engineering, University of Alberta, Edmonton, Alberta T6G 2V4, Canada
Gregory K. Kiema
Affiliation:
Department of Electrical and Computer Engineering, University of Alberta, Edmonton, Alberta T6G 2V4, Canada
Martin O. Jensen
Affiliation:
Department of Electrical and Computer Engineering, University of Alberta, Edmonton, Alberta T6G 2V4, Canada
Michael J. Brett
Affiliation:
Department of Electrical and Computer Engineering, University of Alberta, Edmonton, Alberta T6G 2V4, Canada
Get access

Abstract

Dye sensitized solar cells (DSSCs) were fabricated using porous thin films of TiO2. These films were deposited by electron beam evaporation and an advanced substrate motion technique called PhiSweep. PhiSweep, an extension of glancing angle deposition (GLAD), allows for greater control over the surface area of nanostructured thin films than is possible with traditional GLAD. The as-deposited films were amorphous, so the films were annealed to improve their crystal structure. The films were sensitized with a photoactive dye and implemented into a DSSC configuration as the electron collecting electrode. It was expected that the higher surface area of the films produced using the PhiSweep method would improve the cell performance compared with cells made using traditional GLAD films of TiO2. However, the performance of the cells prepared using PhiSweep films was likely hindered by higher internal resistance of the films compared to the films prepared by traditional GLAD. The highest photoelectric conversion efficiency of the dye sensitized solar cells produced using the PhiSweep method was 1.5%.

Type
Research Article
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] O'Regan, B. and Grätzel, M., Nature 353, 737 (1991).Google Scholar
[2] Hagfeldt, A. and Grätzel, M., Acc. Chem. Res. 33, 269277 (2000).Google Scholar
[3] Kiema, G. K., Colgan, M. J., and Brett, M. J., Sol. Energy Mater. & Sol. Cells, In press (2004).Google Scholar
[4] Robbie, K. and Brett, M. J., U.S. Patent No. 5 866 204, (1999).Google Scholar
[5] Robbie, K. and Brett, M. J., J. Vac. Sci. Technol., A15, 14601465 (1997).Google Scholar
[6] Robbie, K., Brett, M. J., and Lakhtakia, A., Nature, 384, 616 (1996).Google Scholar
[7] Jensen, M. O. and Brett, M. J., Appl. Phys. A, In press (2004).Google Scholar
[8] Colgan, M. J., Djurfors, B., Ivey, D. G, and Brett, M. J., Thin Solid Films, 466, 9296 (2004).Google Scholar
[9] Kennedy, S. R. and Brett, M. J., Nano Letters, 2 (1), 5962 (2002).Google Scholar