Hostname: page-component-7c8c6479df-ws8qp Total loading time: 0 Render date: 2024-03-27T12:45:38.462Z Has data issue: false hasContentIssue false

Creep Cavitation Enhanced by Glass Pocket Formation in a Tetragonal Zirconia Doped with 0.3 WT% Pure Silica

Published online by Cambridge University Press:  15 February 2011

K. Morita
Affiliation:
National Research Institute for Metals, 1-2-1, Sengen, Tsukuba-shi Ibaraki 305-0047, Japan
K. Hiraga
Affiliation:
National Research Institute for Metals, 1-2-1, Sengen, Tsukuba-shi Ibaraki 305-0047, Japan
Y. Sakka
Affiliation:
National Research Institute for Metals, 1-2-1, Sengen, Tsukuba-shi Ibaraki 305-0047, Japan
Get access

Abstract

The relationship between intergranular microstructures and cavitation is examined in a yttria-stabilized tetragonal zirconia doped with 0.2-0.4 wt% SiO2 under constant stress loading in tension. An increase in the initial grain size for a constant SiO2-addition or an increase in SiO2-addition for a constant grain size enhances the precipitation of a glass phase at the multiple grain junctions during deformation. Simultaneously with the enhanced glass phase precipitation, intergranular cavitation is also enhanced. This is because the precipitated glass phase act as the site of cavity formation.

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Yasuda, H. Y. and Hiraga, K., Mater. Sci. Eng. A234–236, p.343 (1997).Google Scholar
2. Morita, K., Sakka, Y. and Hiraga, K., Mater. Sci. Forum. in press.Google Scholar
3. Hiraga, K., Yasuda, H. Y. and Sakka, Y., Mater. Sci. Eng. A234–236, p. 1026 (1997).Google Scholar
4. Uchikoshi, T., Yasuda, H. Y. and Hiraga, K., J. Electroceramics, in press.Google Scholar
5. Ikuhara, Y., Thavomiti, P. and Sakuma, T., Acta metall. mater., 45(1997), 5275.Google Scholar
6. Tsai, R. L. and Raj, R., Acta metall. 30, p.1043 (1982).Google Scholar
7. Marion, J. E., Evans, A. G., Drory, M. D. and Clarke, D. R., Acta metall. 31, p. 1445 (1983).Google Scholar