Hostname: page-component-76fb5796d-5g6vh Total loading time: 0 Render date: 2024-04-25T16:32:48.001Z Has data issue: false hasContentIssue false
  • English
  • Français

Bubble Dynamics in Polymer Melts

Published online by Cambridge University Press:  22 February 2011

Brian J. Briscoe  and
Bharat I. Chaudhary
Brian J. Briscoe
Affiliation:
Department of Chemical Engineering and Chemical Technology, Imperial College, London SW7 2BY, U.K.
Bharat I. Chaudhary
Affiliation:
Department of Chemical Engineering and Chemical Technology, Imperial College, London SW7 2BY, U.K.
Get access

Abstract

A system has been developed for studying the dynamic behaviour of gas bubbles in liquid media and is currently being used to investigate the behaviour of a single nitrogen bubble in molten LDPE. It involves the formation of an initial gas-liquid interface from a capillary by direct injection of the gas into the melt, subsequent growth until an equilibrium state is reached and the application of ambient pressure ramps which result in bubble expansion or contraction. The response depends on the rate of change of the ambient pressure. Experiments have been conducted at various temperatures above the crystalline melting temperature, Tm, of LDPE in the range 120°C-150°C. The numerical data acquired are in the form of pressure and temperature values, and these data are superimposed on stored video images of the bubbles for further processing on an image analyser whereby bubble sizes and shapes are determined.

The results obtained reveal the effect of melt viscoelasticity on the dynamics of bubbles in highly viscous fluid media. Furthermore, the changes in bubble shapes with time due to buoyancy effects are also shown. Clearly, the bubble response in the melt is governed by a combination of viscous and elastic effects. However, in the absence of suitable viscous solutions to the problem, we have attributed the behaviour to a time-dependent elastic response, but only as a first order approximation.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 153: Symposium J – Interfaces Between Polymers, Metals, and Ceramics , 1989 , 175
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Street, J.R., Trans. Soc. Rheol. 12, 103 (1968).Google Scholar
2. Han, C.D., Multiphase Flow in Polymer Processing (Academic Press Inc., New York, 1981), p. 257–340.Google Scholar
3. Pearson, G. and Middleman, S., AIChE Journal 23 (5), 714–725 (1977).Google Scholar
4. Johnson, E.D. and Middleman, S., Polym. Eng. Sci. 18 (12), 963–968 (1978).Google Scholar
5. Papanastasiou, A.C., Scriven, L., Macosko, C.W., J. Non-Newt. Fluid Mech. 16, 53–75 (1984).Google Scholar
6. Suh, K.W. and Webb, D.D., in Encyclopedia of Polymer Science and Technology, Volume 3, 2nd ed., edited by Mark, H.F. et al (John Wiley and Sons, USA, 1985), p. 1–59.Google Scholar
7. Mackenzie, J.K., Proc. Phys. Soc. B 63, 6 (1950).Google Scholar
8. Love, A.E.H., A Treatise on The Mathematical Theory of Elasticity, 4th ed. (Dover, New York, 1944), p. 142.Google Scholar