Hostname: page-component-7bb8b95d7b-dtkg6 Total loading time: 0 Render date: 2024-09-21T14:31:25.516Z Has data issue: false hasContentIssue false
  • English
  • Français

Binary And Ternary Amorphous Alloys of Ion-Implanted Fe-Ti-C

Published online by Cambridge University Press:  26 February 2011

D. M. Follstaedt  and
J. A. Knapp
D. M. Follstaedt
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185
J. A. Knapp
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185
Get access

Abstract

The microstructure of Fe implanted with up to 50 at.% C was found to consist of hexagonal iron carbide precipitates oriented with respect to the Fe matrix. For higher C concentrations, an amorphous phase forms. This concentration dependence is explained in terms of the lattice structure of the iron carbide. In Ti-implanted Fe, substitutional Ti was found in the bcc Fe lattice for concentrations ≤ 15 at.% Ti. The work of others suggests that amorphous phases form for ≥ 33 at.% Ti. These results are discussed in terms of concentration boundaries of the ternary Fe(Ti,C) amorphous phase.

Ion beam alloying methods are currently being used to form metastable alloys [1], both for fundamental investigations of such alloys as well as for potential use to improve physical properties of components [2]. An important consideration in metal alloys is what phase will form upon implantation; one aspect of this question is to determine when amorphous phases will form. Rules are currently being advanced to predict alloy systems which will yield amorphous phases. By using ion irradiation and ion beam mixing as well as ion implantation, such rules can be evaluated over entire composition ranges.

To gain insight into amorphous phase formation, we have studied Fe alloys implanted with C, Ti and Ti + C. The Fe(C) alloys exhibit compound precipitation and amorphous phase formation; the precipitation and the concentrations at which the amorphous phase appears can be accounted for by considerations of the structure of the hexagonal carbide which forms. Based on conventional uses of the Fe(C) system, such alloys may be useful for improving mechanical properties by implanting C into ferrous components. Iron implanted with Ti is examined to a limited extent here, but by including ion irradiation studies by others [3], a more complete characterization of Fe(Ti) alloys is obtained. The microstructures of Fe(C) and Fe(Ti) are examined along with the known composition limits of amorphous Fe(Ti,C) alloys, which are important for their improved mechanical properties [2]. Taken together, a more complete determination of amorphous phase formation in this ternary system is obtained.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 51: Symposium A – Beam-Solid Interactions and Phase Transformations , 1985 , 473
Copyright
Copyright © Materials Research Society 1985

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Follstaedt, D. M., Nucl. Inst. Meth. B7/8, 11 (1985).CrossRefGoogle Scholar
2. Follstaedt, D. M., Nucl. Inst. Meth. B10/11, 549 (1985).Google Scholar
3. Brimhall, J. L., Kissinger, H. E. and Charlot, L. A., Rad. Eff. 77, 273 (1983).Google Scholar
4. Drako, V. M. and Gumanskij, G. A., Rad. Eff. 66, 101 (1982).CrossRefGoogle Scholar
5. Pearson, W. B., Handbook of Lattice Spacings and Structures of Metals and Alloys, Vol. I and II (Pergamon Press, New York, 1958 and 1967), p. 919 and p. 1339, respectively.Google Scholar
6.Joint Committee on Powder Diffraction Standards, entry 6-0670.Google Scholar
7. Rauschenbach, B. and Hohmuth, K., Phys. Stat. Sol. (a) 72, 667 (1982).Google Scholar
8. Silva, J. R. G. da and McLellan, R. B., Mat. Sci. Engr. 26, 83 (1976).Google Scholar
9. Rauschenbach, B., private communication.Google Scholar
10. Knapp, J. A., Follstaedt, D. M. and Doyle, B. L., Nucl. Inst. Meth. B7/8, 38 (1985).Google Scholar
11. Metals Handbook, Vol. 8, 8th Ed., (Am. Soc. Metals, Metals Park, Ohio, 1973), p. 307.Google Scholar
12. Singer, I. L., Carosella, C. A. and Reed, J. R., Nucl. Inst. Meth. 182/183, 923 (1981).Google Scholar
13. Follstaedt, D. M., J. Appl. Phys. 51, 1001 (1980).Google Scholar
14. Follstaedt, D. M., Knapp, J. A., Pope, L.E. and Picraux, S. T., Nucl. Inst. Meth. B12, 359 (1985).Google Scholar
15. Antilla, A., Keinonen, J., Uhrmacher, M. and Vahvaselka, S., J. Appl. Phys. 57, 1423 (1985).Google Scholar
16. Doyle, B. L., Follstaedt, D. M., Picraux, S. T., Yost, F. G., Pope, L. E. and Knapp, J. A., Nucl. Inst. Meth. B7/8, 166 (1985).Google Scholar
17. Rauschenbach, B. and Kolitsch, A., Phys. Stat. Sol. (a) 80, 211 (1983).Google Scholar
18. Yost, F. G., Picraux, S. T., Follstaedt, D. M., Pope, L. E. and Knapp, J. A., Thin Solid Films 107/108, 287 (1983).Google Scholar