Skip to main content Accessibility help
×
Home

Annealing of Nanocrystalline Silicon Micro-bridges with Electrical Stress

  • Gokhan Bakan (a1), Adam Cywar (a2), Cicek Boztug (a3), Mustafa Bilal Akbulut (a4), Helena Silva (a5) and Ali Gokirmak (a6)...

Abstract

Nanocrystalline silicon (nc-Si) micro-bridges are melted and crystallized through Joule heating by applying high-amplitude short duration voltage pulses. Full crystallization of nc-Si bridges is achieved by adjusting the voltage-pulse amplitude and duration. If the applied pulse cannot deliver enough energy to the bridges, only surface texture modification is observed. On the contrary, if the pulse is not terminated after the entire bridge melts, molten silicon diffuses on to the contact pads and the bridge tapers in the middle. Melting of the bridges can be monitored through current-time (I-t) and voltage-time (V-t) measurements during the electrical stress. Conductance of the bridges is enhanced after the electrical stress.

Copyright

References

Hide All
[1] Reuss, R. H., Chalama, B. R., Moussessian, A., Kane, M. G., Kumar, A., Zhang, D. C., Rogers, J. A., Hatalis, M., Temple, D., Moddel, G., Eliasson, B. J., Estes, M. J., Kunze, J., Handy, E. S., Harmon, E. S., Salzman, D. B., Woodall, J. M., Alam, M. A., Murthy, J. Y., Jacobsen, S. C., Olivier, M., Markus, D., Campbell, P. M. and Snow, E., “Macroelectronics: Perspectives on technology and applications,” Proc IEEE, vol. 93, pp. 12391256, 2005.
[2] Wagner, S., Gleskova, H., Cheng, I. C. and Wu, M., “Silicon for thin-film transistors,” Thin Solid Films, vol. 430, pp. 1519, 2003.
[3] McAlpine, M. C., Friedman, R. S. and Lieber, C. M., “High-Performance Nanowire Electronics and Photonics and Nanoscale Patterning on Flexible Plastic Substrates,” Proceedings of the IEEE, Jul, vol. 93, pp. 13571363, 2005.
[4] Kamins, T. I., Polycrystalline Silicon for Integrated Circuits and Displays. Kluwer Academic Publishers, 1998.
[5] Boztug, C., Bakan, G., Akbulut, M., Henry, N., Gokirmak, A. and Silva, H., “Numerical modeling of electrothermal effects in silicon nanowires,” in Mater, Res, Soc, Symp, Proc, vol. 1083, pp. R0411, 2008.
[6] The Cornell NanoScale Science & Technology Facility, www.cnf.cornell.edu.
[7] Raman, M., Kifle, T., Bhattacharya, E. and Bhat, K., “Physical Model for the Resistivity and Temperature Coefficient of Resistivity in Heavily Doped Polysilicon,” Electron Devices, IEEE Transactions on, vol. 53, pp. 18851892, 2006.
[8] Henry, N., “Crystallization of amorphous silicon nanowires using electromigration and self-heating for TFT applications “NNIN REU 2006 Research Accomplishments.

Keywords

Related content

Powered by UNSILO

Annealing of Nanocrystalline Silicon Micro-bridges with Electrical Stress

  • Gokhan Bakan (a1), Adam Cywar (a2), Cicek Boztug (a3), Mustafa Bilal Akbulut (a4), Helena Silva (a5) and Ali Gokirmak (a6)...

Metrics

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed.