Skip to main content Accessibility help
×
Home

Analysis of Residual Stress and Damage Durability with Thermal Fatigue Behavior in Thermal Barrier Coatings

  • Dong-Ho Park (a1), Hyung-Jun Jang (a1), Yeon-Gil Jung (a1), Jung-Chel Chang (a2) and Ungyu Paik (a3)...

Abstract

Static thermal fatigue tests for thermal barrier coatings (TBCs) were conducted to observe effects of temperature and holding time on its mechanical properties, hardness and modulus, and damage durability. For which three TBCs samples with different thickness in bonding layer (0.08, 0.14, and 0.28 mm) were prepared using an air plasma spraying (APS) method. Temperature of 950 and 1100°C and holding time of 10 and 100 hr were selected for the thermal fatigue tests. The TBCs with thin bonding layer (0.08 mm) maintain sound condition for all the thermal fatigue tests, even showing an evidence of cracking at the interface between coating and bonding layers. However, the TBCs with intermediate (0.14 mm) and thick (0.28 mm) bonding layers show delamination at interface and fracture of coating layer after the thermal fatigue tests at 1100°C for 100 hr. Thermal growth oxide (TGO) layer is created at the interface between coating and bonding layers in all the TBCs after the thermal fatigue tests, and the TGO layer thickness is mainly affected by temperature. Modulus and hardness of coating layer are increased with an increase of temperature in the thermal fatigue tests, due to the re-sintering of coating layer during the thermal fatigue tests. Effects of bonding layer thickness and thermal fatigue condition on mechanical properties, residual stresses, damage durability of the TBCs are discussed extensively.

Copyright

References

Hide All
1. Bose, S., and , DeMasi-Marcin, J. Therm. Spray. Technol. 6, 99(1997).
2. Bennett, A., Mater. Sci. Technol. 30, 1(1987).
3. Brandon, J.R., and Taylor, R., Surf. Coat. Technol. 39, 143(1989)
4. Haynes, J.A., Ferber, M.K., and Porter, W.D., J. Therm. Spray. Technol. 9, 38(1997).
5. Teixeira, V., Andritschky, M., Fischer, W., Buchkremer, H.P., and Stover, D., J. Mater. Proce. Technol. 92–93, 209(1999).
6. Oliver, W.C., Pharr, G.M., J. Mater. Res. 7, 1564(1992).
7. Guiberteau, F., Padture, N.P., Cai, H. and Lawn, B.R., Philos. Mag. A68, 1003(1993).
8. Swain, M.V. and Lawn, B.R., Phys. Stat. Solid. 35, 909(1969).

Analysis of Residual Stress and Damage Durability with Thermal Fatigue Behavior in Thermal Barrier Coatings

  • Dong-Ho Park (a1), Hyung-Jun Jang (a1), Yeon-Gil Jung (a1), Jung-Chel Chang (a2) and Ungyu Paik (a3)...

Metrics

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed