Hostname: page-component-76fb5796d-dfsvx Total loading time: 0 Render date: 2024-04-25T17:02:59.073Z Has data issue: false hasContentIssue false
  • English
  • Français

Alloy Joints for High Temperature Electronic Packaging

Published online by Cambridge University Press:  10 February 2011

William W. So  and
Chin C. Lee
William W. So
Affiliation:
Department of Electrical and Computer Engineering, University of California, Irvine, CA. 92697
Chin C. Lee
Affiliation:
Department of Electrical and Computer Engineering, University of California, Irvine, CA. 92697
Get access

Abstract

High temperature joints are required for packaging and assembling the emerging high temperature semiconductor devices. A technique of producing high temperature joints at relatively low process temperature is presented. The technique uses liquid-solid interdiffusion to formulate the joint and subsequent solid-state diffusion and interaction to convert the joint material into high temperature alloy. Processes have been developed using the indium-silver binary material system. Joint melting temperature higher than 700°C has been achieved while the process temperature stays below 210°C. In this development effort, the constituent element materials are deposited in multilayer structure in high vacuum to prevent oxidation. As a result, no flux is used and no scrubbing action is applied. The joints produced are examined with a scanning acoustic microscope (SAM) to evaluate the bonding quality. The joint cross-sections are studied using SEM and EDX to find the microstructure and composition. In conventional processes, the process temperature needs to exceed the alloy melting temperature in order to produce a joint. High stresses can develop due to thermal expansion mismatch among materials involved. In the present technique, the relatively low process temperature can significantly reduce the stresses. The multilayer bonding method also facilitates control of the alloy composition and the joint thickness.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 515: Symposium J – Electronic Packaging Materials Science X , 1998 , 91
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Trew, R. J. and Shin, M. W., “Wide bandgap semiconductor MESFETs for high temperature applications”, Third International Workshop on Integrated Nonlinear Microwave and Millimeterwave Circuits. Pp. 109–123, Duisburg, Germany, Oct. 5–7, 1994 Google Scholar
2. Dreike, P. L., Fleetwood, D. M., King, D. B., Sprauer, D. C., and Zipperian, T. E., “An overview of high temperature electronic devices”, Sandia National Labs. Report, SAND 94–085oJ, May 1994.Google Scholar
3. Casady, J. B., Luckowski, E. D., Johnson, R. W., Crofton, J., and Williams, J. R., “Fabrication procedures and characterization of 6H-SiC MESFETs for use in high temperature electronics”, Proc. 1995 IEEE Electronic Components and Technology Conference, pp. 261–265, Las Vegas, NV, May 21–24, 1995.Google Scholar
4. Agarwal, A. K., Casady, J. B., Rowland, L. B., Seshadri, S., Siergiej, R. R., Valek, W. F. and Brandt, C.D., “700-V Asymmetrical 4H-SiC Gate Turn-off Thyristors (GTO's)”, IEEE Electron Device Letter, Vol.18, No. 11, November 1997.Google Scholar
5. Tomana, Miro, Johnson, R. Wayne, Jaeger, R.C, and Dillard, W.C., “A Hybrid Silicon Carbide Differential Amplifier for 350°C Operation”, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, Vol.16, No. 5, August 1993.Google Scholar
6. Vescan, A., Daumiller, I., Gluche, P., Ebert, W., and Kohn, E., “Very high temperature operation of diamond Schottky Diode”, IEEE Electron Device Letters, Vol.18, No. 11, November 1997.Google Scholar
7. Gogl, D., Burbach, G., Fiedler, H. L., Verbeck, M., and Zimmermann, C., “A single-Poly EEPROM cell in SIMOX technology for high-temperature applications up to 250°C”;, IEEE Electron Device Letters, Vol 18, NO. 11, November 1997.Google Scholar
8. Agarwal, A.K., Casady, J. B., Rowland, L. B., Valek, W. F., White, M. H., and Brandt, C. D., “1.IKV 4H-SiC power UMOSFET's”, IEEE Electron Device Letters, Vol.18, No. 12, December 1997.Google Scholar
9. Berstein, L., “Semiconductor joining by the solid-liquid interdiffusion”, J Electrochemical Soc., 113 (1966), 1282.Google Scholar
10. Lee, Chin C. and Chen, Yi-Chia, “High temperature tin-copper joints produced at low process temperature for stress reduction”, Thin Solid Films 286 (1996) 213–218.Google Scholar
11. Baren, M. R. in Massalski, T. B. (ed.), Binary Alloy Phase Diagrams, pp.47–48, ASM International, Metal Park, Ohio. 1990.Google Scholar
12. Simic, V. and Marinkovic, Z., “Room Temperature Interactions in Ag-Metals Thin Film Couples,” Thin Solid Films, 61, pp. 149–160, 1979.Google Scholar
13. Roy, Rita (nee Mukhopadhyay) and Sen, S. K., “The Kinetics of Formation of Intermetallics in Ag/In Thin Film Couples,” Thin Solid Films, 197, pp. 303–318, 1992.Google Scholar
14. Lee, C. C., Tsai, C. S., and Cheng, X., “Complete characterization of thin and thick-film materials using wideband reflection acoustic microscopy”, IEEE Trans. Sonics and Ultrasonics, SU–32 (1985) 248.Google Scholar
15. Matijasevic, G. and Lee, C. C., “Void-free Au-Sn eutectic bonding of GaAs dice and its characterization using scanning acoustic microscopy”, J Electronic Materials, Packaging Technology, Vol.18 pp. 327–337, March 1989.Google Scholar