Hostname: page-component-8448b6f56d-sxzjt Total loading time: 0 Render date: 2024-04-19T05:15:50.475Z Has data issue: false hasContentIssue false
  • English
  • Français

Aging Influence on the Shape Memory Effects and Superelasticity in Titanium-Nickel Single Crystals

Published online by Cambridge University Press:  10 February 2011

Yu.I. Chumlyakov ,
I. V. Kireeva ,
V. N. Lineytsev  and
A. G. Lwisyuk
Yu.I. Chumlyakov
Affiliation:
Siberian Physical Technical Institute, Revolution sq., 1, Tomsk 634050, Russia, chum@phys.tsu.tomsk.su
I. V. Kireeva
Affiliation:
Siberian Physical Technical Institute, Revolution sq., 1, Tomsk 634050, Russia, chum@phys.tsu.tomsk.su
V. N. Lineytsev
Affiliation:
Siberian Physical Technical Institute, Revolution sq., 1, Tomsk 634050, Russia, chum@phys.tsu.tomsk.su
A. G. Lwisyuk
Affiliation:
Siberian Physical Technical Institute, Revolution sq., 1, Tomsk 634050, Russia, chum@phys.tsu.tomsk.su
Get access

Abstract

On the Ti-50.8%Ni, Ti-51%Ni and Ti-51.3%Ni (at.%) single crystals, the investigations of the shape memory effects (SME) and superelasticity (SE) have been carried out in order to find out the dependence on a size and a volume fraction of the Ti3Ni4 dispersive particles, a crystal orientation and a sign of applied stress. It is shown, that in crystals without particles the strong dependence of SME on an orientation and a sign of applied stress takes place and SE is not observed. Precipitation of the coherent particles of Ti3Ni4 of 50–100 nm in size leads to the reduction of SME, weakening of orientation dependence of σcr interval of stress-induced martensitic transformations (MT).

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 459: Symposium Y – Materials for Smart Systems II , 1996 , 387
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Nishida, M., Wayman, C.M. and Honma, H., Met. Trans. A17 (7–12), 1505–1515 (1986).Google Scholar
2. Nishida, M., Wayman, C.M. and Chiba, A., Metallography 21, 273–291 (1988).Google Scholar
3. Otsuka, K., Shimizu, K., Suzuki, Y., Sekiguchi, Y., Tadaki, T., Honma, T., Miyazaki, S., Shape memory alloys (Metallurgic Publisher, Moscow, 1990), p. 224.Google Scholar
4. Ashby, M.F., Phyl. Mag., 21, 399–424 (1970).Google Scholar
5. Saburi, T., Nenno, S. in Solid-Solid Phase Transformations, edited by Aaronson, H.I., Laughlin, E.E., Sekerka, R.F., and Wayman, C.W., (The Metallurgical Society of AIME, Warrendale, PA, 1982), pp. 1455–1479.Google Scholar
6. Miyazaki, S., Kimura, S., Otsuka, K. and Suzuki, Y., Scripta Met. 18, 883–888 (1984).Google Scholar
7. Buchheit, T.E., Wert, J.A., Metallurgical and Materials Transactions A, 25A (11), 2383–2389 (1994).Google Scholar
8. Orgeas, L., Favier, D., Journal de Physique IV 5, C8–605-C8–610 (1995).Google Scholar
9. Liu, Y.,, Favier, D. and Orgeas, L., Journal de Physique IV 5, C8–593C8–598 (1995).Google Scholar