Hostname: page-component-8448b6f56d-xtgtn Total loading time: 0 Render date: 2024-04-23T22:45:09.714Z Has data issue: false hasContentIssue false

Effects of Ga doping and nitridation on ZnO films prepared by RF Sputtering

Published online by Cambridge University Press:  03 January 2013

Takumi Araki
Affiliation:
Department of Electronics and Bioinformatics, Meiji University, Kawasaki 214-8571, Japan
Jun-ichi Iwata
Affiliation:
Department of Electronics and Bioinformatics, Meiji University, Kawasaki 214-8571, Japan
Hiroshi Katsumata
Affiliation:
Department of Electronics and Bioinformatics, Meiji University, Kawasaki 214-8571, Japan
Get access

Abstract

GaZnO and GaZnON thin films were deposited on both Si (100) and c-axis oriented sapphire substratesby RF co-sputtering of ZnO target and Ga2O3tablets in Ar/O2 and Ar/N2, respectively, by changing the number of Ga2O3tablets (NGa2O3) placed on the ZnO target in the range of 0 to 16.They were subsequently annealed in N2 at 800 °C and then, some of the samples formed by Ar/O2-sputtering were subjected to NH3 treatment at 650 °C for nitridation. XRD measurements revealed that the c-axis lattice parameter calculated from the ZnO (002) peak for GaZnON film son Si (100) was remarkably larger than for GaZnO films on Si (100). Moreover, ZnO (002) was observed up to NGa2O3=16 for GaZnON films formed on sapphire, while no XRD peaks were observed above NGa2O3=8 for GaZnON films on Si(100). Optical band-gap ofGaZnO and GaZnON films became wider from 3.34to 3.67 eVand from 3.21to 3.40 eV, respectively, with increasing NGa2O3 from 0 to 16. Photoluminescence spectra of GaZnO films showed band-to-band emission at 380nm, while those of GaZnON films exhibited broad and weak peaks centered at 550 nm and 647nm.

Type
Articles
Copyright
Copyright © Materials Research Society 2012 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Shabnam, , Ravi Kant, Chhaya, Arun, P., Journal of Luminescence, 132, 1774 (2012).CrossRefGoogle Scholar
Zhao, Junliang, Sun, Xiao Wei and Tiam Tan, Swee, IEEE Trans Electron Devices, 56, 2995 (2009).CrossRefGoogle Scholar
Wang, Junpeng,a Huang, Baibiao, Wang, Zeyan, Wang, Peng, Cheng, Hefeng, Zheng, Zhaoke, Qin, Xiaoyan, Zhang, Xiaoyang, Daib, Ying and Whangboc, Myung-Hwan, J. Mater. Chem., 21, 4562 (2011).CrossRefGoogle Scholar
Futsuhara, Masanobu, Yoshioka, Katsuaki and Takai, Osamu, Thin Solid Films, 317, 322 (1998).CrossRefGoogle Scholar
Quang Le, Hong, Kuan Lim, Swee, Goh, Gregory Kia Liang, Jin Chua, Soo and Ong, JunXiong, J. Electrochem. Soc., 157, H769 (2010).Google Scholar
Al Asmar, R., Juillaguet, S., Ramonda, M., Giani, A., Combette, P., Khoury, A., Foucaran, A., J. Crystal Growth, 275, 512 (2005).CrossRefGoogle Scholar
Quang Le, Hong, Kuan Lim, Swee, Goh, Gregory Kia Liang, Chua, Jin and Ong, JunXiong et al. ., J. Electrochem. Soc., 157, 796 (2010).Google Scholar
McCluskey, M. D. and Jokela, S. J.,J. Appl. Phys.,106, 071101 (2009).CrossRefGoogle Scholar
Reshchikov, Michael. A. and Morkoç, Hadis, J. Appl. Phys., 97, 061301 (2005).CrossRefGoogle Scholar