Skip to main content Accessibility help
×
Home

Multimaterial, heterogeneous, and multicellular three-dimensional bioprinting

  • Carmelo De Maria (a1), Giovanni Vozzi (a2) and Lorenzo Moroni (a3)

Abstract

Bioprinting promises to create three-dimensional in vitro models to study pathological states and possible new therapies, and in the future, to produce complex tissue and organ replacements. This article will describe the recent advances in bioprinting technologies to engineer artificial tissues and organs by controlling spatial heterogeneity of chemical and physical properties of scaffolds and, at the same time, the cellular composition and spatial arrangement. Despite significant technological improvements in recent years, the positioning at the micrometric level and the switching of different cell types and biomaterials remain a challenge, which limits the development of resilient vascular, neural, and lymphatic networks for metabolites, signaling, and waste transport, and thus limits the development of thick and clinically relevant engineered vascularized tissues.

Copyright

References

Hide All
1. Murphy, S.V., Atala, A., Nat. Biotechnol. 32 (8), 773 (2014).
2. Feinberg, A.W., Miller, J.S., MRS Bull. 42 (8), 557 (2017).
3. Guillemot, F., Mironov, V., Nakamura, M., Biofabrication 2 (1), 010201 (2010).
4. Groll, J., Boland, T., Blunk, T., Burdick, J.A., Cho, D.W., Dalton, P.D., Derby, B., Forgacs, G., Li, Q., Mironov, V.A., Moroni, L., Nakamura, M., Shu, W., Takeuchi, S., Vozzi, G., Woodfield, T.B., Xu, T., Yoo, J.J., Malda, J., Biofabrication 8 (1), 013001 (2016).
5. Ozbolat, I.T., Hospodiuk, M., Biomaterials 76, 321 (2016).
6. Saunders, R.E., Derby, B., Int. Mater. Rev. 59 (8), (2014), http://dx.doi.org/10.1179/1743280414Y.0000000040.
7. Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., Kim, K., Biofabrication 7 (4), 045009 (2015).
8. Melchels, F.P., Barradas, A.M., van Blitterswijk, C.A., de Boer, J., Feijen, J., Grijpma, D.W., Acta Biomater. 6 (11), 4208 (2010).
9. Malda, J., Visser, J., Melchels, F.P., Jüngst, T., Hennink, W.E., Dhert, W.J., Groll, J., Hutmacher, D.W., Adv. Mater. 25 (36), 5011 (2013).
10. Arslan-Yildiz, A., El Assal, R., Chen, P., Guven, S., Inci, F., Demirci, U., Biofabrication 8 (1), 014103 (2016).
11. Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., Ovsianikov, A., Biofabrication 8 (3), 032002 (2016).
12. Atala, A., Kasper, F.K., Mikos, A.G., Sci. Transl. Med. 4 (160), 160rv12 (2012).
13. Zhu, W., Qu, X., Zhu, J., Ma, X., Patel, S., Liu, J., Wang, P., Lai, C.S., Gou, M., Xu, Y., Zhang, K., Chen, S., Biomaterials 124, 106 (2017).
14. Jang, J., Kim, T.G., Kim, B.S., Kim, S.W., Kwon, S.M., Cho, D.W., Acta Biomater. 33, 88 (2016).
15. Boland, T., Mironov, V., Gutowska, A., Roth, E.A, Markwald, R.R., Anat. Rec. A Discov. Mol. Cell Evol. Biol. 272 (2), 497 (2003).
16. Derby, B., Science 338, 921 (2012).
17. Salmasi, S., Kalaskar, D.M., Yoon, W.-W., Blunn, G.W., Seifalian, A.M., World J. Stem Cells 7 (2), 266 (2015).
18. Skardal, A., Atala, A., Ann. Biomed. Eng. 43 (3), 730 (2015).
19. Rutz, A.L., Hyland, K.E., Jakus, A.E., Burghardt, W.R., Shah, R.N., Adv. Mater. 27 (9), 1607 (2015).
20. Schuurman, W., Levett, P.A., Pot, M.W., van Weeren, P.R., Dhert, W.J., Hutmacher, D.W., Melchels, F.P., Klein, T.J., Malda, J., Macromol. Biosci. 13 (5), 551 (2013).
21. Chang, C.C., Boland, E.D., Williams, S.K., Hoying, J.B., J. Biomed. Mater. Res. B 98 (1), 160 (2011).
22. Brandl, F., Sommer, F., Goepferich, A., Biomaterials 28 (2), 134 (2007).
23. Fedorovich, N.E., Schuurman, W., Wijnberg, H.M., Prins, H.J., van Weeren, P.R., Malda, J., Alblas, J., Dhert, W.J., Tissue Eng. Part C Methods 18 (1), 33 (2012).
24. Hanson Shepherd, J.N., Parker, S.T., Shepherd, R.F., Gillette, M.U., Lewis, J.A., Nuzzo, R.G., Adv. Funct. Mater. 21 (1), 47 (2011).
25. Wang, X., Yan, Y., Pan, Y., Xiong, Z., Liu, H., Cheng, J., Liu, F., Lin, F., Wu, R., Zhang, R., Lu, Q., Tissue Eng. 12 (1), 83 (2006).
26. Pataky, K., Braschler, T., Negro, A., Renaud, P., Lutolf, M.P., Brugger, J., Adv. Mater. 24 (3), 391 (2012).
27. Montemurro, F., De Maria, C., Orsi, G., Ghezzi, L., Tinè, M.R., Vozzi, G., J. Biomed. Mater. Res. B (2015), doi:10.1002/jbm.b.33569.
28. De Maria, C., Rincon, J., Duarte, A.A., Vozzi, G., Boland, T., Polym. Adv. Technol. 24, 895 (2013).
29. Fedorovich, N.E., Swennen, I., Girones, J., Moroni, L., van Blitterswijk, C.A., Schacht, E., Alblas, J., Dhert, W.J., Biomacromolecules 10 (7), 1689 (2009).
30. Colosi, C., Shin, S.R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M.R., Dentini, M., Khademhosseini, A., Adv. Mater. 28 (4), 677 (2016).
31. Itoh, M., Nakayama, K., Noguchi, R., Kamohara, K., Furukawa, K., Uchihashi, K., Toda, S., Oyama, J., Node, K., Morita, S., PLoS One 10 (9), e0136681 (2015).
32. Jakab, K., Neagu, A., Mironov, V., Markwald, R.R., Forgacs, G., Proc. Natl. Acad. Sci. U.S.A. 101 (9), 2864 (2004).
33. Tan, Y.J., Tan, X., Yeong, W.Y., Tor, S.B., Sci. Rep. 6. 39140 (2016).
34. Norotte, C., Marga, F.S., Niklason, L.E., Forgacs, G., Biomaterials 30 (30), 5910 (2009).
35. Jakab, K., Norotte, C., Marga, F., Murphy, K., Vunjak-Novakovic, G., Forgacs, G., Biofabrication 2 (2), 022001 (2010).
36. Rezende, R.A., Pereira, F.D.A.S., Kasyanov, V., Ovsianikov, A., Torgensen, J., Gruber, P., Stampfl, J., Brakke, K., Nogueira, J.A., Mironov, V., da Silva, J.V.L., Virtual Phys. Prototyp. 7 (4), 287 (2012).
37. Gao, J., Tang, C., Elsawy, M.A., Smith, A.M., Miller, A.F., Saiani, A., Biomacromolecules 18 (3), 826 (2017).
38. Highley, C.B., Rodell, C.B., Burdick, J.A., Adv. Mater. 27 (34), 5075 (2015).
39. Chang, R., Nam, J., Sun, W., Tissue Eng. Part A 14 (1), 41 (2008).
40. Tirella, A., De Maria, C., Criscenti, G., Vozzi, G., Ahluwalia, A., Rapid Prototyp. J. 18 (4), 299 (2012).
41. Ozbolat, I.T., Chen, H., Yu, Y., Robot. Comput. Integr. Manuf. 30 (3), 295 (2014).
42. Campbell, J., McGuinnes, I., Wirz, H., Sharon, A., Sauer-Budge, A.F., J. Nanotechnol. Eng. Med. 6 (2), (2015), doi:10.1115/1.4031230.
43. Liu, W., Zhang, Y.S., Heinrich, M.A., De Ferrari, F., Jang, H.L., Bakht, S.M., Moisés Alvarez, M., Yang, J., Li, Y.-C., Trujillo-de Santiago, G., Miri, A.K., Zhu, K., Khoshakhlagh, P., Prakash, G., Cheng, H., Guan, X., Zhong, Z., Ju, J., Zhu, G.H., Jin, X., Shin, S.R., Dokmeci, M.R., Khademhosseini, A., Adv. Mater. 29 (3), 1604630 (2017), doi:10.1002/adma.201604630.
44. Snyder, J., Son, A.R., Hamid, Q., Wu, H., Sun, W., Biofabrication 8 (1), 015002 (2016).
45. Orsi, G., Fagnano, M., De Maria, C., Montemurro, F., Vozzi, G., J. Tissue Eng. Regen. Med. 11 (1), 256 (2014).
46. Nair, K., Gandhi, M., Khalil, S., Yan, K.C., Marcolongo, M., Barbee, K., Sun, W., Biotechnol J. 4 (8), 1168 (2009).
47. Miller, J.S., Stevens, K.R., Yang, M.T., Baker, B.M., Nguyen, D.H., Cohen, D.M., Toro, E., Chen, A.A., Galie, P.A, Yu, X., Chaturvedi, R., Bhatia, S.N., Chen, C.S., Nat Mater. 11 (9), 768 (2012).
48. Kolesky, D.B., Homan, K.A., Skylar-Scott, M.A., Lewis, J.A., Proc. Natl. Acad. Sci. U.S.A. 113 (12), 3179 (2016).
49. Kodadek, T., Chem. Biol. 8 (2), 105 (2001).
50. Arrabito, G., Musumeci, C., Aiello, V., Libertino, S., Compagnini, G., Pignataro, B., Langmuir 25 (11), 6312 (2009).
51. Cahill, D.J., J. Immunol. Methods 250 (1–2), 81 (2001).
52. Allain, L.R., Stratis-Cullum, D.N., Vo-Dinh, T., Anal. Chim. Acta 518 (1–2), 77 (2004).
53. Yanez, M., Rincon, J., Dones, A., De Maria, C., Gonzales, R., Boland, T., Tissue Eng. Part A 21 (1–2), 224 (2015).
54. Derby, B., Annu. Rev. Mater. Res. 40, 395 (2010).
55. Saunders, R.E., Gough, J.E., Derby, B., Biomaterials 29 (2), 193 (2008).
56. Tirella, A., Vozzi, F., De Maria, C., Vozzi, G., Sandri, T., Sassano, D., Cognolato, L., Ahluwalia, A., J. Biosci. Bioeng. 112 (1), 79 (2011).
57. Cui, X., Dean, D., Ruggeri, Z.M., Boland, T., Biotechnol. Bioeng. 106 (6), 963 (2010).
58. Xu, T., Baicu, C., Aho, M., Zile, M., Boland, T., Biofabrication 1 (3), 035001 (2009).
59. Cui, X., Boland, T., Biomaterials 30 (31), 6221 (2009).
60. Orsi, G., De Maria, C., Montemurro, F., Chauhan, V.M., Aylott, J.W., Vozzi, G., Curr. Top. Med. Chem. 15 (3), 271 (2015).
61. Di Biase, M., Saunders, R.E., Tirelli, N., Derby, B., Soft Matter 7, 2639 (2011).
62. Xu, T., Binder, K.W., Albanna, M.Z., Dice, D., Zhao, W., Yoo, J.J., Atala, A., Biofabrication 5 (1), 015001 (2013).
63. Cui, X., Breitenkamp, K., Finn, M.G., Lotz, M., D’Lima, D.D., Tissue Eng. Part A 18 (1112), 1304 (2012).
64. Teo, W.-E., Inai, R., Ramakrishna, S., Sci. Technol. Adv. Mater. 12 (1), 013002 (2011).
65. Moroni, L., de Wijn, J.R., van Blitterswijk, C.A., J. Biomater. Sci. Polym. Ed. 19, 543572 (2008).
66. Moroni, L., Schotel, R., Hamann, D., De Wijn, J.R., van Blitterswijk, C.A., Adv. Funct. Mater. 18, 5360 (2008).
67. Park, S.H., Kim, T.G., Kim, H.C., Yang, D.Y., Park, T.G., Acta Biomater. 4, 11981207 (2008).
68. Criscenti, G., Longoni, A., Di Luca, A., De Maria, C., van Blitterswijk, C.A., Vozzi, G., Moroni, L., Biofabrication 8 (1), 015009 (2016).
69. Carrabba, M., De Maria, C., Oikawa, A., Reni, C., Rodriguez-Arabaolaza, I., Spencer, H., Slater, S., Avolio, E., Dang, Z., Spinetti, G., Madeddu, P., Vozzi, G., Biofabrication 8 (1), 015020 (2016).
70. He, J., Xia, P., Li, D., Biofabrication 8 (3), 035008 (2016).
71. Li, Y.C., Zhang, Y.S., Akpek, A., Shin, S.R., Khademhosseini, A., Biofabrication 9 (1), 012001 (2016).
72. Tumbleston, J.R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A.R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J.P., Ermoshkin, A., Samulski, E.T., De Simone, J.M., Science 347, 6228, 1349 (2015).

Keywords

Multimaterial, heterogeneous, and multicellular three-dimensional bioprinting

  • Carmelo De Maria (a1), Giovanni Vozzi (a2) and Lorenzo Moroni (a3)

Metrics

Altmetric attention score

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed