Skip to main content Accessibility help
×
Home

The Current Status of Research and Development on Ecomaterials around the World

  • Kohmei Halada and Ryoichi Yamamoto

Extract

The final decade of the 20th century was the most important period yet in establishing a sustainable society for the coming century. After the Earth summit held in Rio de Janeiro in 1992, the world's population was challenged to decrease its environmental impact on the Earth. Nine years after the Rio summit, we are living in a more dangerous and unsustainable world with a higher population, more resource consumption, more waste, and more poverty, but with less biodiversity, less forest area, less available fresh water, less fertile soil, and less stratospheric ozone.

Copyright

References

Hide All
1.Adriaanse, A.Bringezu, S.Hammond, A.Moriguchi, Y.Rodenburg, E.Rogich, D. and Schuetz, H.Resource Flows: The Material Basis of Industrial Economies (World Resources Institute, Washington, DC, 1997) p.23.
2.Rare Metals Forum, eds., Ecomaterial (in Japanese) (Society of Non-Traditional Technology, Tokyo, 1991).
3.Halada, K.Bull. Jpn. Inst. Met. 31 (1992) (in Japanese) p.505.
4.Yamamoto, R. and Wang, T., eds., Ecomaterials (Chemical Industry Press, Beijing, 1997).
5.Gutowski, T.M.Murphy, C.F.Allen, D.T.Bauer, D.J.Bras, B.Piwonka, T.S.Sheng, P.S.Sutherland, J.W.Thurston, D.L. and Wolff, E.E.WTEC Panel Report on Environmentally Benign Manufacturing (International Technology Research Institute, Baltimore, 2001).
6.Mostaghaci, H. ed., Environment Conscious Materials—Ecomaterials (MetSoc Publications, Ottawa, 2000).
7.Atraki, I.Desantis, C.Felton, L.Felty, J.Greaves, J., Handwerker, C.Mather, J., Napp, D.Pan, T.Rosser, J.Vianco, P. and Whitten, G. in Proc. 1st Intl. Symp. on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign '99) (Institute of Electrical and Electronics Engineers, Piscataway, NJ, 1999) p.602.
8.Kang, S.K.JOM 53 (6)(2001) p.16.
9.Gayle, F.Becka, G.Badgett, J.Whitten, G.Pan, T., Grusd, A.Bauer, B.Lathrop, R.Slattery, J., Anderson, I.Foley, J.Glikler, A.Napp, D.Mather, J., and Olson, C.JOM 53 (6)(2001) p.17.
10.Habu, K.Takeda, N.Watanabe, H.Ooki, H.Abe, J., Saito, T.Taniguchi, Y. and Takayama, K. in Proc. 1st Intl. Symp. on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign '99) (Institute of Electrical and Electronics Engineers, Piscataway, NJ, 1999) p.606.
11.Igoshev, V. and Kleiman, J. in Environment Conscious Materials—Ecomaterials, edited by Mostaghaci, H. (MetSoc Publications, Ottawa, 2000) p.703.
12.Suganuma, K. in Proc. 1st Intl. Symp. on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign '99) (Institute of Electrical and Electronics Engineers, Piscataway, NJ, 1999) p.620.
13.Warashina, K.Kariya, Y.Hirata, Y. and Otsuka, M. in Proc. 1st Intl. Symp. on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign '99) (Institute of Electrical and Electronics Engineers, Piscataway, NJ, 1999) p. 626.
14.Tsunekage, N.Kobayashi, K. and Tsubakino, H. in Proc. Int. Conf. on Steel and Society (The Iron Steel Institute of Japan, Tokyo, 2000) p.299.
15.Takamori, S.Osawa, Y.Arakane, G.Minagawa, K.Yamamoto, S.Halada, K.Yin, F.Kawahara, K. and Sato, A. in Environment Conscious Materials—Ecomaterials, edited by Mostaghaci, H. (MetSoc Publications, Ottawa, 2000) p.259.
16.Choji, S. and Sakauchi, T. in Proc. 1st Intl. Symp. on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign '99) (Institute of Electrical and Electronics Engineers, Piscat-away, NJ, 1999) p.929.
17.Gagliano, R.A. and Fine, M.E.JOM 53 (6) (2001) p.33.
18.Kanai, H.Yamasaki, M.Mori, Y.Ueda, K.Morishita, A.Furukawa, H.Ishizuka, K. and Wake, R.Shinnittetsu Goho (371) (1999) p.43.
19.Iji, M.Serizawa, S. and Kiuchi, Y. in Proc. 1st Intl. Symp. on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign '99) (Institute of Electrical and Electronics Engineers, Piscataway, NJ, 1999) p.245.
20.Yoshino, A.Sawada, H.Suzuki, J.Hasegawa, M.Murayama, M. and Sinmoto, T. in Proc. 1st Intl. Symp. on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign '99) (Institute of Electrical and Electronics Engineers, Piscataway, NJ, 1999) p.979.
21.Minagawa, K.Kakisawa, H.Okuyama, H.Ohtaguchi, M. and Halada, K. in Proc. 2000 Powder Metallurgy World Congress (Powder and Powder Metallurgy Society of Japan, Kyoto, 2001) p.218.
22.Okayama, T.Okabe, T.Saito, K.Endo, H. and Yamamura, A. in Proc. 3rd Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1997) p.186.
23.Oh, S.W.Okabe, T. and Hirose, T. in Environment Conscious Materials—Ecomaterials, edited by Mostaghaci, H. (MetSoc Publications, Ottawa, 2000) p.725.
24.Kiyozuka, Y.Komatuzaki, H.Morita, S.Okabe, T.Hirose, T. and Hata, Y. in Proc. 4th Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p.683.
25.Hirose, T. and Okabe, T. in Proc. 4th Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p.675.
26.Kakishita, K. and Suda, T. in Proc. 4th Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p.297.
27.Azuma, T.Otsuka, M.Hata, K.Tsuji, J.Okabe, T. and Takayama, T. in Proc. 1st Intl. Symp. on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign '99) (Institute of Electrical and Electronics Engineers, Piscataway, NJ, 1999) p.920.
28.Martinez-Fernández, J., Valera-Feria, F.M., Rodríguez, A. Domínguez, and Singh, M. in Environment Conscious Materials—Ecomaterials, edited by Mostaghaci, H. (MetSoc Publications, Ottawa, 2000) p.733.
29.Guanjun, Q.Zhang, M.R. and Zhihao, J. in Proc. 4th Int. Conf on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p.301.
30.Ishida, E.H. in Proc. 4th Int. Conf. on Eco-materials (Society of Non-Traditional Technology, Tokyo, 1999) p.7.
31.Shin, H.Watanabe, O.Maenami, H. and Ishida, H. in Proc. 1st Intl. Symp. on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign '99) (Institute of Electrical and Electronics Engineers, Piscataway, NJ, 1999) p. 550.
32.Obana, H.The Encyclopedia of Ecomaterials (in Japanese), Ecomaterials Forum, Eds. (Science Forum, Tokyo, 1996) p.363.
33.Miura, K.Suzuki, T.Maruta, T.Hashimoto, K. and Toda, Y. in Proc. 4th Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p.707.
34.Nakashima, Y.Kimura, T. and Asano, K. in Proc. 4th Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p.695.
35.Sivasundaram, M.Drew, R.A.L. and Caley, W.F. in Environment Conscious Materials—Ecomaterials, edited by Mostaghaci, H. (MetSoc Publications, Ottawa, 2000) p.297.
36.Salgado, S.Perez, C.Diaz, C.Banuelos, J.G. and Saniger, J.M. in Environment Conscious Materials—Ecomaterials, edited by Mostaghaci, H. (MetSoc Publications, Ottawa, 2000) p.309.
37.Hernandez, A.Palencia, I.Diaz, C.Cruz, E. and Zayas, M.E. in Environment Conscious Materials—Ecomaterials, edited by Mostaghaci, H. (MetSoc Publications, Ottawa, 2000) p.323.
38.Simon, F.Koecher, P. and Kley, G. in Proc. 4th Int. Conf. on Ecomaterials (Society of NonTraditional Technology, Tokyo, 1999) p.467.
39.Golestani-Fard, F. and Amirarjmand, A. in Environment Conscious Materials—Ecomaterials, edited by Mostaghaci, H. (MetSoc Publications, Ottawa, 2000) p.315.
40.Gutowski, T.M.Murphy, C.F.Allen, D.T.Bauer, D.J.Bras, B.Piwonka, T.S.Sheng, P.S.Sutherland, J.W.Thurston, D.L. and Wolff, E.E.WTEC Panel Report on Environmentally Benign Manufacturing (International Technology Research Institute, Baltimore, 2001) p.209.
41.Tomota, Y.Tsuchida, N. and Nagai, K. in Proc. Int. Workshop on Recyclable Materials Design and Ecobalance, edited by Nii, K. (National Research Institute for Metals, Tsukuba, 1995) p.91.
42.Nagai, K. in Proc. 4th Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p.475.
43.Umezawa, O. and Nagai, K. in Proc. 3rd Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1997) p.59.
44.Yokohama, H.Umezawa, O.Nagai, K. and Kokubo, K. in Proc. 4th Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p.491.
45.Halada, K.Minagawa, K.Itsubo, N.Okuyama, H. and Ohno, S. in Proc. 1998 Powder Metallurgy World Congress (European Powder Metallurgy Association, Shrewsbury, UK, 1998) p.78.
46.Tomota, Y.Tsuchida, Y.Morita, A. and Kirihara, S. in Proc. 4th Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p.41.
47.Watanabe, Y. and Fukui, Y. in Proc. 4th Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p.495.
48.Iwashige, Y.Takeno, A. and Miwa, M. in Proc. 4th Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p.627.
49.Hashimoto, T.Yano, E.Ando, Y. and Kanazawa, Y. in Proc. 1st Intl. Symp. on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign '99) (Institute of Electrical and Electronics Engineers, Piscataway, NJ, 1999) p.236.
50.Kuhm, K.Witek, W. and Kuehnle, H. in Proc. 1st Intl. Symp. on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign '99) (Institute of Electrical and Electronics Engineers, Piscataway, NJ, 1999) p.241.
51.Kimura, T. and Katori, S. in Proc. 4th Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p.181.
52.Hosoda, N.Kitaoka, F. and Suga, T. in Proc. 4th Int. Conf. on Ecomaterials (Society of NonTraditional Technology, Tokyo, 1999) p.91.
53.Chido, J.D.Bilett, E.H.Harrison, D.J. and Anson, A.W. in Proc. 4th Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p.95.
54.Schmidt-Bleek, F., das MIPS-Konzept (An-gentur Zero, Munich, 1998).
55.Kawai, J., in Proc. 4th Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p. 27.
56.Watanabe, T.Kuwahara, H.Mazaki, N.Young, X.Aizawa, T. and Samejima, S. in Proc. 4th Int. Conf. on Ecomaterials (Society of NonTraditional Technology, Tokyo, 1999) p.67.
57.Miura, H. and Matsuda, M. in Proc. 4th Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p.87.
58.Fujiki, A. in Proc. 4th Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p.82.
59.Aizawa, T. in Proc. 4th Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p.75.
60.Mabuchi, M.Nakamura, M.Mohri, T. and Higashi, K. in Proc. 4th Int. Conf. on Ecomaterials (Society of Non-Traditional Technology, Tokyo, 1999) p.79.
61.Nagai, K. in Environment Conscious Materials—Ecomaterials, edited by Mostaghaci, H. (MetSoc Publications, Ottawa, 2000) p.247.

The Current Status of Research and Development on Ecomaterials around the World

  • Kohmei Halada and Ryoichi Yamamoto

Metrics

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed