Skip to main content Accessibility help
×
Home

Evaluation Residual Moisture in Lithium-Ion Battery Electrodes and Its Effect on Electrode Performance

  • Jianlin Li (a1), Claus Daniel (a1) (a2), Seong Jin An (a1) (a2) and David Wood (a1) (a2)

Abstract

Removing residual moisture in lithium-ion battery electrodes is essential for desired electrochemical performance. In this manuscript, the residual moisture in LiNi0.5Mn0.3Co0.2O2 cathodes produced by conventional solvent-based and aqueous processing is characterized and compared. The electrochemical performance has also been investigated for various residual moisture contents. It has been demonstrated that the residual moisture lowers the first cycle coulombic efficiency, but its effect on short term cycle life is insignificant.

    • Send article to Kindle

      To send this article to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about sending to your Kindle. Find out more about sending to your Kindle.

      Note you can select to send to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be sent to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.

      Find out more about the Kindle Personal Document Service.

      Evaluation Residual Moisture in Lithium-Ion Battery Electrodes and Its Effect on Electrode Performance
      Available formats
      ×

      Send article to Dropbox

      To send this article to your Dropbox account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your <service> account. Find out more about sending content to Dropbox.

      Evaluation Residual Moisture in Lithium-Ion Battery Electrodes and Its Effect on Electrode Performance
      Available formats
      ×

      Send article to Google Drive

      To send this article to your Google Drive account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your <service> account. Find out more about sending content to Google Drive.

      Evaluation Residual Moisture in Lithium-Ion Battery Electrodes and Its Effect on Electrode Performance
      Available formats
      ×

Copyright

Corresponding author

*Corresponding author: lij4@ornl.gov

References

Hide All
(1)Li, J.; Daniel, C.; Wood, D. Journal of Power Sources 2011, 196, 2452.
(2)Wood, D. L. III; Li, J.; Daniel, C. Journal of Power Sources 2015, 275, 234.
(3)Lim, S.; Kim, S.; Ahn, K. H.; Lee, S. J. Journal of Power Sources 2015, 299, 221.
(4)Loeffler, N.; von Zamory, J.; Laszczynski, N.; Doberdo, I.; Kim, G.-T.; Passerini, S. Journal of Power Sources 2014, 248, 915.
(5)Doberdò, I.; Löffler, N.; Laszczynski, N.; Cericola, D.; Penazzi, N.; Bodoardo, S.; Kim, G.-T.; Passerini, S. Journal of Power Sources 2014, 248, 1000.
(6)ÇEtinel, F.; Bauer, W. Bull Mater Sci 2014, 37, 1685.
(7)Li, J.; Armstrong, B.; Kiggans, J.; Daniel, C.; Wood, D III. Langmuir 2012, 28, 3783.
(8)Li, J.; Klöpsch, R.; Nowak, S.; Kunze, M.; Winter, M.; Passerini, S. Journal of Power Sources 2011, 196, 7687.
(9)Zhong, H.; Sun, M.; Li, Y.; He, J.; Yang, J.; Zhang, L. Journal of Solid State Electrochemistry 2015, 1.
(10)Li, J.; Armstrong, B. L.; Daniel, C.; Kiggans, J.; Wood, D. L. IiiJournal of Colloid and Interface Science 2013, 405, 118.
(11)Guerfi, A.; Kaneko, M.; Petitclerc, M.; Mori, M.; Zaghib, K. Journal of Power Sources 2007, 163, 1047.
(12)Li, C. C.; Lee, J. T.; Peng, X. W. Journal of the Electrochemical Society 2006, 153, A809.
(13)Lee, J.-T.; Chu, Y.-J.; Peng, X.-W.; Wang, F.-M.; Yang, C.-R.; Li, C.-C. Journal of Power Sources 2007, 173, 985.
(14)Wu, Q.; Ha, S.; Prakash, J.; Dees, D. W.; Lu, W. Electrochimica Acta 2013, 114, 1.
(15)Li, C.-C.; Wang, Y.-W. Journal of Power Sources 2013, 227, 204.
(16)Fergus, J. W. Journal of Power Sources 2010, 195, 939.
(17)Loeffler, N.; Kopel, T.; Kim, G.-T.; Passerini, S. Journal of the Electrochemical Society 2015, 162, A2692.
(18)Li, C. C.; Peng, X. W.; Lee, J. T.; Wang, F. M. Journal of the Electrochemical Society 2010, 157, A517.
(19)Porcher, W.; Lestriez, B.; Jouanneau, S.; Guyomard, D. Journal of Power Sources 2010, 195, 2835.
(20)Li, J.; Armstrong, B. L.; Kiggans, J.; Daniel, C.; Wood, D. L. Journal of the Electrochemical Society 2013, 160, A201.
(21)Li, J.; Rulison, C.; Kiggans, J.; Daniel, C.; Wood, D. L III. J. Electrochem. Soc. 2012, 159, A1152.
(22)Zhang, X.; Jiang, W. J.; Zhu, X. P.; Mauger, A.; Qilu, ; Julien, C. M.Journal of Power Sources 2011, 196, 5102.
(23)Zaghib, K.; Dontigny, M.; Charest, P.; Labrecque, J. F.; Guerfi, A.; Kopec, M.; Mauger, A.; Gendron, F.; Julien, C. M. Journal of Power Sources 2008, 185, 698.
(24)Burrell, A. K., “Enabling High-Energy/Voltage Lithium-Ion Cells for Transportation Applications,” DOE Annual Merit Review, Crystal City, VA, June 8-12, 2015.
(25)Daniel, C., and Mike, Wixom, “Transformational electrode drying process”, ORNL/TM-2012/617, DOI:10.2172/1060885

Keywords

Evaluation Residual Moisture in Lithium-Ion Battery Electrodes and Its Effect on Electrode Performance

  • Jianlin Li (a1), Claus Daniel (a1) (a2), Seong Jin An (a1) (a2) and David Wood (a1) (a2)

Metrics

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed