Hostname: page-component-7c8c6479df-7qhmt Total loading time: 0 Render date: 2024-03-29T05:39:21.023Z Has data issue: false hasContentIssue false

A Confocal Raman-AFM Study of Graphene

Published online by Cambridge University Press:  28 October 2011

U. Schmidt*
Affiliation:
WITec GmbH, Lise-Meitner Str. 6, 89081 Ulm, Germany
T. Dieing
Affiliation:
WITec GmbH, Lise-Meitner Str. 6, 89081 Ulm, Germany
W. Ibach
Affiliation:
WITec GmbH, Lise-Meitner Str. 6, 89081 Ulm, Germany
O. Hollricher
Affiliation:
WITec GmbH, Lise-Meitner Str. 6, 89081 Ulm, Germany

Extract

The discovery by Novoselov and Geim of a simple method to transfer a single atomic layer of carbon from the c-face of graphite to a substrate suitable for measurements of its electrical and optical properties has led to an increased interest in studying and employing two-dimensional model systems. An overview of electron and phonon properties of graphene and their relationship to the one-dimensional form of carbon known as nanotubes can be found in. The unique chemical, mechanical, electrical, and optical properties of graphene lead to its many application possibilities such as: single molecule detectors, high-strength low-weight new materials, design of new semiconductor devices, etc.

Type
Scanning Probe Microscopy
Copyright
Copyright © Microscopy Society of America 2011

Introduction

The discovery by Novoselov and Geim [Reference Novoselov, Geim, Morozov, Jiang, Zhang, Dubonos, Grigorieva and Firsov1] of a simple method to transfer a single atomic layer of carbon from the c-face of graphite to a substrate suitable for measurements of its electrical and optical properties has led to an increased interest in studying and employing two-dimensional model systems. An overview of electron and phonon properties of graphene and their relationship to the one-dimensional form of carbon known as nanotubes can be found in [Reference Charlier, Eklund, Zhu, Ferrari, Jorio, Dresselhaus and Dresselhaus2]. The unique chemical, mechanical, electrical, and optical properties of graphene lead to its many application possibilities such as: single molecule detectors, high-strength low-weight new materials, design of new semiconductor devices, etc.

An important goal however is the detection of such angstrom-thick two-dimensional sheets and precisely determining the number of layers forming the graphene flake. The aim of this contribution is to show how a confocal Raman AFM can contribute to the characterization of such small materials and devices. In the past two decades, AFM (atomic force microscopy) was one of the main techniques used to characterize the morphology of nano-materials spread on nanometer-flat substrates. From such images it is possible to gain information about the physical dimensions of the material on the nanometer scale, without additional information about their chemical composition, crystallinity, or stress state. On the other hand, Raman spectroscopy is known to be used for unequivocally determining the chemical composition of a material. By combining chemically sensitive Raman spectroscopy with high-resolution confocal optical microscopy, the analyzed material volume can be reduced below 0.02 μm3, leading to the ability to acquire Raman images with diffraction-limited resolution from very flat surfaces [Reference Lasch, Hermelink and Naumann3, Reference Jungen, Popov, Stampfer, Durrer, Stoll and Hierold4]. Using the combination of confocal Raman microscopy with AFM, the high spatial and topographical resolution obtained with an AFM can be directly linked to the chemical information provided by confocal Raman spectroscopy [Reference Schmidt, Hild, Ibach and Hollricher5].

Experimental

The confocal Raman AFM alpha300 RA (www.witec.de) was used for AFM imaging in ambient conditions (24 ± 2°C). For high-resolution topographic imaging, the AFM was operated in AC-Mode, also known as Tapping Mode. In this imaging mode the cantilever is oscillated at its resonance frequency with a free amplitude A0. While the cantilever is approaching the surface, the oscillating amplitude is reduced to a value A, which depends on the distance to the surface. The ratio r = A/A0 defines the damping of the amplitude while the tip is in contact with the surface and is proportional to the applied force. By keeping the damping of the amplitude constant, the surface topography can be mapped. The AFM images were acquired with Arrow Force Modulation cantilevers from NanoWorld (www.nanoworld.com). The nominal spring constant of these cantilevers was 2.8 N/m, and the resonance frequency was 70–80 kHz.

For confocal Raman measurements, the alpha300 RA was equipped with a 100× (NA = 0.90) air objective and a frequency-doubled Nd:YAG laser (excitation at 532 nm). The same graphene flake previously imaged with AFM was analyzed in Raman imaging mode. In this mode, Raman images were obtained by collecting a complete Raman spectrum at every image pixel with typical integration times below 50 ms/pixel. Spectral features (sum, peak position, peak width, etc.) were used to generate the Raman images.

Results and Discussion

An exfoliated graphene sheet deposited on the SiO2 top layer of a Si wafer by a method described in reference 1 was examined using confocal Raman AFM. Figure 1a shows the topography of the graphene flake recorded in AFM-AC Mode. The cross section 1 highlighted in Figure 1a shows the topography variation over a bi-, mono-, and no-graphene layer. This cross section is presented in Figure 2 (top). The height difference between the SiO2/Si wafer and the first graphene layer is 0.8 ± 0.2 nm, whereas the double-layer of graphene is 1.2 ± 0.2 nm high. These height differences are in good agreement with previously reported AFM measurements of single and bi-layers of graphene on SiO2/Si substrates [Reference Ishigami, Chen, Cullen, Fuhrer and Williams6].

Figure 1: Atomic force microscope (AFM) topography image of a graphene flake (a) and Raman image of the same graphene flake showing the integrated intensity of the G-band (b).

Figure 2: Signal intensity along “Cross section 1” marked in Figure 1 obtained from the AFM image (top) and Raman image (bottom).

A confocal Raman image was recorded from the same sample area by acquiring a spectral array of 85 × 50 complete Raman spectra. The averaged spectrum of all recorded spectra from the array is shown in Figure 3. At low wave numbers the characteristic Raman bands of the SiO2/Si substrate are visible. The characteristic Raman bands for graphite/graphene are: the D-band (at about 1360 rel. 1/cm) characteristic for the breathing modes of sp2 bonded atoms in rings and the G-band (at about 1580 rel. 1/cm) due to bond stretching of sp2 bonded atoms in chains and rings [Reference Castiglioni, Negri, Rigolio and Zerbi7, Reference Tuinstra and Koenig8, Reference Ferrari and Robertson9]. In graphene two additional Raman bands, D′ (around 2700 rel. 1/cm) and 2D′ (around 3250 rel. 1/cm), are observed, which are both due to second-order resonant phonon Raman scattering [Reference Charlier, Eklund, Zhu, Ferrari, Jorio, Dresselhaus and Dresselhaus2]. The image in Figure 1b shows the integrated intensity of the G-band from the 2D spectral array. It can be seen that the integrated intensity of the G-band varies proportionally with the number of graphene sheets [Reference Graf, Molitor, Ensslin, Stampfer, Jungen, Hierold and Wirtz10, Reference Yu, Shen, Wang, Wu, Chen and Wee11]. A cross section 1′ along the same sample position as in the topography image is shown in Figure 2 (bottom). This image already indicates that Raman microscopy, a fast, non-contact imaging method, can give insight into the composition of a graphene flake. A more detailed analysis of the 2D array of spectra can reveal many more details about the structure of graphene. Figure 4 shows the variation of the G-band position (top), D′-band position (middle), and D′-band width as a function of number of graphene layers along cross section 1′ together with the corresponding Raman images. The Raman images were obtained by a Lorenz fit of the corresponding Raman band. The position of the G-band decreases with an increasing number of graphene sheets from 1582 rel. 1/cm to 1579 rel. 1/cm due to a slightly higher frequency of the Raman active photon in graphene than in graphite [Reference Piscanec, Lazzeri, Mauri, Ferrari and Robertson12]. The increase of the D′-band position and D′-band width with increasing number of graphene layers is due to strong electron-phonon coupling in single and bi-layers of graphene [Reference Charlier, Eklund, Zhu, Ferrari, Jorio, Dresselhaus and Dresselhaus2, Reference Graf, Molitor, Ensslin, Stampfer, Jungen, Hierold and Wirtz10, Reference Yu, Shen, Wang, Wu, Chen and Wee11, Reference Piscanec, Lazzeri, Mauri, Ferrari and Robertson12]. Based on these results, one can assign the number of layers that form the studied graphene flake. Numbers in the Raman images in Figure 4 indicate the number of graphene layers. An inconsistency however can be seen in the area marked with a question mark. In this area the position of the G-band shows the presence of one graphene layer, however the Raman image obtained from the Lorenz fit of the position of the D′-band (Figure 4 middle), the integrated intensity of the G-band (Figure 1b), and the AFM image (Figure 1a) show the presence of at least two graphene layers. The data measured from cross sections along section 2 and 2′ in the AFM topography image (Figure 1a), the Raman images of the intensity of G-band (Figure 1b), position of G-band (Figure 4 top right), center of D′-band (Figure 4 middle right) are summarized in Table 1. The inconsistency described above may arise from a flipped-over, decoupled part of the graphene layer. One can clearly see that the topography of this double layer is in good agreement with the double height of a single layer of graphene deposited on a SiO2/Si substrate. A similar result is obtained from the integrated intensity of the G-band, showing clearly the presence of two graphene layers. Nevertheless, the center position of the G and D′-bands clearly show the properties of a single, loose graphene layer.

Figure 3: Averaged Raman spectrum of the analyzed graphene flake.

Figure 4: Variation of the position of the G-band (top left), D′-band (middle left), and width of D′-band (bottom left) along “Cross Section 1” marked in Figure 1 without the SiO2/Si substrate and the corresponding Raman images of the analyzed graphene flake (right column).

Table 1: Summary of measured data obtained along cross section 2 from the AFM topography image and various Raman images recorded from the same sample area shown in Figure 1.

Summary

The combination of a confocal Raman microscope with an AFM was used for the characterization of a graphene flake. The AFM image reveals the topographic structure of the graphene flake with a sub-nanometer z-resolution. From this image it is possible to determine the number of graphene layers in the graphene flake.

Raman spectroscopy allows the identification of chemically different materials or different properties within a material. Graphene flakes consisting of single or bi-layers of graphene of sub-nanometer height provide a strong Raman signal because of their special electronic and photonic properties. The Raman signal is very sensitive to the number of graphene layers, thus Raman imaging of graphene flakes provides a fast and detailed description of the structure of graphene.

References

[1]Novoselov, KS, Geim, AK, Morozov, SV, Jiang, D, Zhang, Y, Dubonos, SV, Grigorieva, IV, Firsov, AA, Science 306(5696) (2004) 666.CrossRefGoogle Scholar
[2]Charlier, JC, Eklund, PC, Zhu, J, and Ferrari, AC, “Electron and phonon properties of graphene: their relationship with carbon nanotubes” in Jorio, A, Dresselhaus, G, and Dresselhaus, MS, Carbon Nanotubes: Advanced Topics in the Synthesis, Structure, Properties and Applications, Series: Topics in Applied Physics 111, Springer-Verlag, New York, 2008, 673709.Google Scholar
[3]Lasch, P, Hermelink, A, and Naumann, D, Analyst 19 (2009).Google Scholar
[4]Jungen, A, Popov, VN, Stampfer, C, Durrer, C, Stoll, S, and Hierold, C, Physical Review 75(405) (2007).Google Scholar
[5]Schmidt, U, Hild, S, Ibach, W, and Hollricher, O, Macromol Symp 230(133) (2005).CrossRefGoogle Scholar
[6]Ishigami, M, Chen, JH, Cullen, WG, Fuhrer, MS, and Williams, ED, Nano Lett 7 (2007) 1643.CrossRefGoogle Scholar
[7]Castiglioni, C, Negri, F, Rigolio, M, Zerbi, G, J Chem Phys 115 (2001) 3769.CrossRefGoogle Scholar
[8]Tuinstra, F and Koenig, J, J Chem Phys 53 (1970) 1126.CrossRefGoogle Scholar
[9]Ferrari, AC and Robertson, J, Phys Rev B 61 (2000) 14095.CrossRefGoogle Scholar
[10]Graf, D, Molitor, F, Ensslin, K, Stampfer, C, Jungen, A, Hierold, C, and Wirtz, L, Eur Phys J Special Topics 148 (2007) 171–76.CrossRefGoogle Scholar
[11] Yy Wang, Zh Ni, Yu, T, Shen, ZX, Wang, Hm, Wu, Yh, Chen, W, and Wee, ATS, J Phys Chem C 112 (2008) 10637–40.Google Scholar
[12]Piscanec, S, Lazzeri, M, Mauri, F, Ferrari, A, and Robertson, J, Phys Rev Lett 93 (2004) 185503.CrossRefGoogle Scholar
Figure 0

Figure 1: Atomic force microscope (AFM) topography image of a graphene flake (a) and Raman image of the same graphene flake showing the integrated intensity of the G-band (b).

Figure 1

Figure 2: Signal intensity along “Cross section 1” marked in Figure 1 obtained from the AFM image (top) and Raman image (bottom).

Figure 2

Figure 3: Averaged Raman spectrum of the analyzed graphene flake.

Figure 3

Figure 4: Variation of the position of the G-band (top left), D′-band (middle left), and width of D′-band (bottom left) along “Cross Section 1” marked in Figure 1 without the SiO2/Si substrate and the corresponding Raman images of the analyzed graphene flake (right column).

Figure 4

Table 1: Summary of measured data obtained along cross section 2 from the AFM topography image and various Raman images recorded from the same sample area shown in Figure 1.