Hostname: page-component-788cddb947-nxk7g Total loading time: 0 Render date: 2024-10-19T16:42:05.255Z Has data issue: false hasContentIssue false
  • English
  • Français

Chemical Quantitative Analysis of Small Precipitates in the FE-SEM Using the Energy Distribution of Backscattered Electrons

Published online by Cambridge University Press:  02 July 2020

Raynald Gauvin
Raynald Gauvin*
Affiliation:
Département de génie mécanique, Université de Sherbrooke, Sherbrooke, Québec, CanadaJ1K 2R1.
Get access

Extract

Low voltage scanning electron microscopy with a field emission source allows characterization of materials with high spatial resolution. This high resolution comes from the low incident energy which gives a small interaction volume (about 10 nm in Fe at 1 keV ), from the field emission source which gives a small probe size (about 2.5 nm in the most recent FE-SEM) and from virtual, or through the lens, secondary electron detectors with gives high collection efficiency and eliminates some of the SEII and all the SEIII- For example, it has been shown that 10 nm NbC inclusions in steels can be imaged in such FE-SEM at 2 keV (this work was performed with a HITACHI S-4500). However, quantitative x-ray analysis of such precipitates are difficult because the critical ionization energy of the Nb Lα lines is equal to 2.37 keV, an incident electron energy of at least 5 keV must be used to get significant x-ray counts rates.

Type
New Trends in Scanning Electron Microscopy and Microanalysis
Information
Microscopy and Microanalysis , Volume 4 , Issue S2: Proceedings: Microscopy & Microanalysis '98, Microscopy Society of America 56th Annual Meeting, Microbeam Analysis Society 32nd Annual Meeting, Atlanta, Georgia July 12-16, 1998 , July 1998 , pp. 254 - 255
Copyright
Copyright © Microscopy Society of America

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Gauvin, R. and Yue, S. (1997), ”The observation of NbC precipi-tates in steel in the nanometer range using a field emission gun scanning electron microscope”. Microscopy & Microanalysis, Vol. 3, Supp. 2, pp. 1243–1244.CrossRefGoogle Scholar
2.Rau, E. I. and Robinson, V. N. E. (1996), Scanning, Vol. 18, p. 156.Google Scholar
3.Gauvin, R., Hovington, P. et Drouin, D. (1995), “Quantification of Spherical Inclusions in the Scanning Electron Microscope Using Monte Carlo Simulations”, Scanning, Vol. 17, pp. 202–219.CrossRefGoogle Scholar
4.Hovington, P., Drouin, D. et Gauvin, R. (1997), “Casino:A New Era of Monte Carlo Code in C Language for the Electron Beam Interaction, Part I:Description of the Program”,Scanning, Vol.l9, pp. 1–14.Google Scholar