Hostname: page-component-7c8c6479df-27gpq Total loading time: 0 Render date: 2024-03-29T08:07:39.341Z Has data issue: false hasContentIssue false

Simulation probabiliste de l'usure dans les contacts roulants sous charges

Published online by Cambridge University Press:  06 February 2008

Sylvain Cloupet
Affiliation:
LTN – INRETS, 2 Av. du Général Malleret-Joinville, 94114 Arcueil Cedex, France
Luc Chevalier
Affiliation:
Université de Marne la Vallée, LaM EA2545, 5 boulevard Descartes, Champs sur Marne, 77454 Marne la Vallée Cedex, France
Hugues Chollet
Affiliation:
LTN – INRETS, 2 Av. du Général Malleret-Joinville, 94114 Arcueil Cedex, France
Get access

Abstract

L'étude présentée dans cet article concerne le problème industriel de l'usure dans les contacts roulants sous charge. La déformation locale de la zone de contact associée à l'existence d'efforts tangentiels conduit à du micro glissement et de l'usure superficielle qui "creuse" la piste de roulement. D'un point de vue industriel, cette usure détériore le fonctionnement des machines pilotées par des systèmes "came–galet". Dans le prolongement de l'étude présentée dans [1] les auteurs proposent une démarche qui permet de suivre l'évolution de l'usure au cours du temps tout en prenant en compte les dispersions expérimentales observées sur banc d'essai. Les méthodes présentées ici, peuvent être appliquées au dimensionnement des roulements et engrenages par exemple, et plus généralement à tout mécanisme dans lequel il y a du roulement faiblement lubrifié entre deux solides. Dans le cadre de cet article on se limite au cas stationnaire pour lequel la charge normale et la vitesse de renouvellement du contact n'évoluent pas au cours du temps. C'est dans ce cadre que nos essais d'usure ont été réalisés et l'objectif de cette étude est de simuler ces essais. La démarche suivie prend en compte les dispersions de positionnement des pièces, les dispersions mesurées sur l'effort de contact et les incertitudes du coefficient de frottement au travers d'une approche probabiliste.

Type
Research Article
Copyright
© AFM, EDP Sciences, 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

L. Chevalier, S. Cloupet, M. Quillien, Friction and wear during twin-disc experiments under ambient and cryogenic conditions, Trib. Inter. (2006) 1376–1387
Chevalier, L., Chollet, H., Endommagement des pistes de roulement, Mécanique & Industries 1 (2000) 77103 CrossRef
Quillien, M., Gras, R., Collongeat, L., Kachler, Th., A testing device for rolling-sliding behavior in harsh environments: the twin-disk cryotribometer, Trib. Int. 34 (2001) 287292 CrossRef
Ohyama, T., Maruyama, H., Traction and slip at higher rolling speeds: some experiments under dry friction and water lubrification, J. Japan Soc. Lubrication Eng. 21 (1976) 434440
H. Chollet, Etude en similitude mécanique des efforts tangents au contact roue-rail, Thèse Paris-6, 1991
Fillot, N., Iordanoff, I., Berthier, Y., Simulation of wear through mass balance in dry contact, J. Trib. 127 (2005) 973981
Fillot, N., Iordanoff, I., Berthier, Y., Modeling and the third body concept, Wear 262 (2007) 949957 CrossRef
Fillot, N., Iordanoff, I., Berthier, Y., Modelling third body flows with a discrete element method, a tool for understanding wear with adhesive particles, Trib. Int. 40 (2007) 973981 CrossRef
Archard, J.F., Contact and rubbing of flat surfaces, J. Appl. Phys. 24 (1953) 981988 CrossRef
Jendel, T., Prediction of wheel profile wear-comparisons with field measurements, Wear 253 (2002) 8999 CrossRef
Moore, M.A., Abrasive wear, Materials in engenering applications 1 (1978) 97111 CrossRef
Zi-Li Li, J.J Kalker, Simulation of Severe Wheel-Rail Wear, Proceedings International Conference Computers in Railways, ed. WITPRESS, Southampton UK, 1998, 6, pp. 393–402.
Põdra, P., Anderson, S., Wear calculations with the Winkler surface model, Wear 207 (1997) 7985 CrossRef
Goryacheva, I.G., Rajeev, P.T., Farris, T.N., Wear in Partial Slip Contact, J. Tribology 123 (2001) 848856 CrossRef
Olofsson, U., Telliskivi, T., Plastic deformation and friction of two rail steels, a full-scale test and a laboratory study, Wear 254 (2003) 8093 CrossRef
Telliskivi, T., Simulation of wear in a rolling–sliding contact by a semi-Winkler model and the Archard's wear law, Wear 256 (2004) 817831 CrossRef
Enblom, R., Berg, M., Simulation of railway wheel profile development due to wear, influence of disc braking and contact environment, Wear 258 (2005) 10551063 CrossRef
Kim, N.H., Won, D., Burris, D., Holtkamp, B., Gessel, G.R., Swanson, P., Sawyer, W.G., Finite element analysis experiments of metal/metal wear in oscillatory contacts, Wear 258 (2005) 17871793 CrossRef
J. Boussinesq, Application des potentiels à l'équilibre et du mouvement des solides élastiques, ed. Gauthier-Villars, Paris, 1885
Vermeulen, P.J., Johnson, K.L., Contact of non-spherical elastic bodies transmitting tangential forces, Trans. ASME J. Appl. Mech. 31 (1964) 338340 CrossRef
E. Legrand, F. Robbe-Valloire, Analyse des efforts tangentiels dans les contacts billes-bagues non lubrifiés, Revue Française de Mécanique, Bulletin S.F.M. (1994) 93–102
Carter, F.W., On the action of a locomotive driving wheel, Proc. Royal Soc. London A112 (1926) 151157 CrossRef
Kalker, J.J., The computation of three-dimensional rolling contact with dry friction, Int. J. Numer. Methods Eng. 14 (1979) 12931307 CrossRef
Kalker, J.J., Wheel/rail wear calculations with the program CONTACT, Contact Mechanics and Wear of Rail/Wheel System 2 (1987) 326
Kalker, J.J., Fast Al, Agorithm for the Simplified Theory of Rolling Contact, Vehicle Syst. Dyn. 11 (1982) 113 CrossRef
B. Jacobson, J.J. Kalker, Rolling Contact Phenomena: Linear Elasticity, CISM Lecture No. 411, Springer, Berlin, 2000
Ayasse, J. B., H.Chollet, Determination of the Wheel Rail Contact Patch in Semi-Hertzian Conditions, Veh. Syst. Dyn. 43 (2005) 161172 (2005) CrossRef
W. Kik, J. Piotrowski, A fast approximative method to calculate normal load at contact between wheel and rail, and creep forces during rolling, Proceedings of the 2nd mini-conference on contact mechanics and wear of rail/wheel systems, Budapest, Technical University of Budapest, 29–31 July, 1996, pp. 52–61
Chevalier, L., Cloupet, S., Eddhahak, A., Contributions à la modélisation simplifiée de la Mécanique des contacts roulants, Mécanique & Industries 7 (2006) 155168 CrossRef
Quost, X., Sebes, M., Eddhahak-Ouni, A., Ayasse, J.B., Chollet, H., Gautier, P.E., Thouverez, F., Assessment of a semi-Hertzian method for determination of wheel-rail contact patch, Vehicle System Dynamics 44 (2006) 789814 CrossRef
Nayroles, B., Touzot, G., Villon, P., La méthode des éléments diffus, C. R. Acad. Sci. Paris, Ser. II 313 (1991) 133138
Jaynes, E.T., Information theory and statistical mechanics, Phys. Rev. 106 (1957) 620630; 108 (1957) 171–190 CrossRef
J.N. Kapur, H.K. Kesavan, Entropy optimisation principle with applications, ed. Academic Press, San Diego, 1992
Chevalier, L., Cloupet, S., Soize, C., Probabilistic approach for wear modelling in steady state rolling contact, Wear 258 (2005) 15431554 CrossRef