Skip to main content Accessibility help
×
Home

Injection and induction acceleration of Ar3+ in the KEK Digital Accelerator

  • X. Liu (a1) (a2), T. Yoshimoto (a1) (a2), K. Takayama (a1) (a2) (a3), T. Adachi (a2) (a3), E. Kadokura (a2), N. Munemoto (a1) (a2), S. Takano (a2), T. Kawakubo (a2), K. Okamura (a2) (a3), H. Kobayashi (a4) and M. Hirose (a4)...

Abstract

Four microseconds long Ar3+ beam with injection energy of 15 keV/u has been injected into the Digital Accelerator of the High-Energy Accelerator Research Organization. Beam production, transportation, and injection are described as well as machine properties. Results of a free running experiment under static magnetic field and longitudinal confinement and acceleration under a fast ramping magnetic field are presented in detail with a brief discussion on the beam lifetime.

Copyright

Corresponding author

Address correspondence and reprint requests to: Xingguang Liu, High Energy Accelerator Research Organization (KEK), Oho 1-1, Tsukuba, 3050801, Japan. E-mail: liuxg@post.kek.jp

References

Hide All
Adachi, T., Arai, T., Leo, K.W., Takayama, K. & Tokuchi, A. (2011). A solid-state Marx generator driven Einzel lens chopper. Rev. Sci. Instrum. 82, 083305.
Adachi, T. & Kawakubo, T. (2013). Electrostatic injection kicker for the KEK digital accelerator. Phys. Rev. Spec. Top. – Accel. Beams 16, 053501.
Bangerter, R.O. (1993). The induction approach to heavy-ion inertial fusion: accelerator and target considerations. Nuovo Cim. A 106, 14451456.
Dixit, T.S., Iwashita, T. & Takayama, K. (2009). Induction acceleration scenario from an extremely low energy in the KEK all-ion accelerator. Nucl. Instrum. Methods Phys. Res. A, Accel. Spectrom. Detect. Assoc. Equip. 602, 326336.
Friedman, A., Barnard, J.J., Cohen, R.H., Grote, D.P., Lund, S.M., Sharp, W.M., Faltens, A., Henestroza, E., Jung, J.-Y., Kwan, J.W., Lee, E.P., Leitner, M.A., Logan, B.G., Vay, J.L., Waldron, W.L., Davidson, R.C., Dorf, M., Gilson, E.P. & Kaganovich, I.D. (2010). Beam dynamics of the Neutralized Drift Compression Experiment-II, a novel pulse-compressing ion accelerator. Phys. Plasmas 17, 056704.
Hofmann, I. (1998). HIDIF – an approach to high repetition rate inertial fusion with heavy ions. Nucl. Instrum. Methods Phys. Res. Sect. A, Accel. Spectrom. Detect. Assoc. Equip. 415, 1119.
Iwashita, T., Adachi, T., Takayama, K., Leo, K.W., Arai, T., Arakida, Y., Hashimoto, M., Kadokura, E., Kawai, M., Kawakubo, T., Kubo, T., Koyama, K., Nakanishi, H., Okazaki, K., Okamura, K., Someya, H., Takagi, A., Tokuchi, A. & Wake, M. (2011). KEK digital accelerator. Phys. Rev. Spec. Top. – Accel. Beams 14, 071301.
Leo, K., Adachi, T., Arai, T. & Takayama, K. (2013). Einzel lens chopper and behavior of the chopped beam in the KEK digital accelerator. Phys. Rev. Spec. Top. – Accel. Beams 16, 043502.
Liu, X., Takayama, K., Adachi, T. & Harada, S. (2011). Simulation analysis of barrier bucket trapped ion bunch squeezing experiment. Presented at the Recent Progress in Induction Accelerator. Chengdu.
Munemoto, N., Takayama, K., Takano, S., Okamura, M. & Kumaki, M. (2014). Development of the C(6+) laser ablation ion source for the KEK digital accelerator. Rev. Sci. Instrum. 85, 02B922.
Takayama, K. (2013). Induction accelerator. J. Plasma Fusion Res. 89, 102109.
Takayama, K., Arakida, Y., Iwashita, T., Shimosaki, Y., Dixit, T. & Torikai, K. (2007). All-ion accelerators: An injector-free synchrotron. J. Appl. Phys. 101, 063304.
Takayama, K. & Kishiro, J. (2000). Induction synchrotron. Nucl. Instrum. Methods Phys. Res. Sect. A, Accel. Spectrom. Detect. Assoc. Equip. 451, 304317.
Takayama, K., Yoshimoto, T., Barata, M., Wah, L.K., Xingguang, L., Iwashita, T., Harada, S., Adachi, T., Arai, T., Arakawa, D., Asao, H., Kadokura, E., Kawakubo, T., Nakanishi, H., Okada, Y., Okamura, K., Okazaki, K., Takagi, A., Takano, S. & Wake, M. (2014). Induction acceleration of heavy ions in the KEK digital accelerator: Demonstration of a fast-cycling induction synchrotron. Phys. Rev. Spec. Top. Accel. Beams 17, 010101.
Wake, M., Arakida, Y., Koseki, K., Shimosaki, Y., Takayama, K., Torikai, K., Jiang, W., Nakahiro, K., Tokuchi, A. & Sugiyama, A. (2007). Switching power supply for induction accelerators. 2007 IEEE Particle Accelator Conf. 251253.
Waldron, W.L., Abraham, W.J., Arbelaez, D., Friedman, A., Galvin, J.E., Gilson, E.P., Greenway, W.G., Grote, D.P., Jung, J.-Y., Kwan, J.W., Leitner, M., Lidia, S.M., Lipton, T.M., Reginato, L.L., Regis, M.J., Roy, P.K., Sharp, W.M., Stettler, M.W., Takakuwa, J.H., Volmering, J. & Vytla, V.K. (2014). The NDCX-II engineering design. Nucl. Instrum. Methods Phys. Res. Sect. A, Accel. Spectrom. Detect. Assoc. Equip. 733, 226232.
Yoshimoto, T., Barata, M., Iwashita, T., Harada, S., Arakawa, D., Arai, T., Liu, X., Adachi, T., Asao, H., Kadokura, E., Kawakubo, T., Kubo, T., Leo, K.W., Nakanishi, H., Okada, Y., Okamura, K., Okazaki, K., Someya, H., Takayama, K. & Wake, M. (2014). Heavy ion beam acceleration in the KEK digital accelerator: Induction acceleration from 200 keV to a few tens of MeV. Nucl. Instrum. Methods Phys. Res. Sect. A, Accel. Spectrom. Detect. Assoc. Equip. 733, 141146.

Keywords

Injection and induction acceleration of Ar3+ in the KEK Digital Accelerator

  • X. Liu (a1) (a2), T. Yoshimoto (a1) (a2), K. Takayama (a1) (a2) (a3), T. Adachi (a2) (a3), E. Kadokura (a2), N. Munemoto (a1) (a2), S. Takano (a2), T. Kawakubo (a2), K. Okamura (a2) (a3), H. Kobayashi (a4) and M. Hirose (a4)...

Metrics

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed