Hostname: page-component-7c8c6479df-hgkh8 Total loading time: 0 Render date: 2024-03-28T23:14:27.367Z Has data issue: false hasContentIssue false

Inherent Strain Method and Thermal Elastic-Plastic Analysis of Welding Deformation of a Thin-Wall Beam

Published online by Cambridge University Press:  05 May 2011

Y.-X. Wang*
Affiliation:
Department of Mechanics, Huazhong University of Science and Technology, Wuhan 430074, China
P. Zhang*
Affiliation:
Department of Mechanics, Huazhong University of Science and Technology, Wuhan 430074, China
Z.-G. Hou*
Affiliation:
School of Mechanical and Electronic Engineering and Automobile Engineering, Yantai University, Yantai 264005, China
C.-Z. Li*
Affiliation:
School of Mechanical and Electronic Engineering and Automobile Engineering, Yantai University, Yantai 264005, China
*
* Associate Professor
*** Ph.D. student
** Ph.D.
**** Professor
Get access

Abstract

The transient thermal process of a thin-wall beam with CO2 Gas Metal Arc Welding (GMAW) is analyzed by Finite Element Analysis Method (FEA). The thermal input is simplified as transient section body heat sources and loaded as its actual sequence in the analysis. The transient temperature field obtained can represent the basic characteristics of the real welding process and can be used as the foundation of thermal elastic-plastic analysis. Based on the temperature field, thermal elastic-plastic FEA is performed on the thin-wall beam. The distribution and change of the welding deformation, stress and strain are obtained and compared with the experiment results. Also an improvement can be presented on the inherent strain method. Using the inherent strain method, the welding deformation of the thin-wall beam is calculated. The temperature loading method is developed to load the variable inherent strain value expediently. The loading of inherent strain value on spatial welding line that is unparallel to the global coordinate axis is achieved with the application of element coordinate system. Comparison with the experiment results shows that both the thermal-elastic-plastic analysis and inherent strain analysis method can be used to predict the welding deformation effectively, the results calculated by both the thermal-elastic-plastic analysis and inherent strain analysis are close to the test measure results.

Type
Articles
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Brown, S. B. and Song, H., “Implications of Three-Dimensional Numerical Simulation of Welding of Large Structure,Welding Journal, 71, pp. 55s62s (1992).Google Scholar
2.Lindgren, L. and Karlsson, L., “Deformation and Stresses in Welding of Shell Structures,International Journal for Numerical Methods in Engineering, 25, pp. 635655 (1988).CrossRefGoogle Scholar
3.Samanta, A. and Mukhopadhyay, M., “Finite Element Large Deflection Static Analysis of Shallow and Deep Stiffened Shells,Finite Elements in Analysis and Design, 33, pp. 187208 (1999).CrossRefGoogle Scholar
4.MacNeal, R. H., “Perspective on Finite Elements for Shell Analysis,Finite Elements in Analysis and Design, 30, pp. 175186(1998).CrossRefGoogle Scholar
5.Weaver, M. A., “Determination of Weld Loads and Throat Requirements Using Finite Element Analysis with Shell Element Models — A Comparison with Classical Analysis,Welding Journal, 78, pp. 116s126s (1999).Google Scholar
6.Kim, J., King, Y. H. and Choi, H. H., “Comparison of Implicit and Explicit Finite-Element Methods for the Hydroforming Process of an Automobile Lower Arm,Int. J. of Advanced Manufacturing Technology, pp. 407413 (2002).Google Scholar
7.Ueda, Y., Yao, T. and Nakacho, K., “Prediction of Welding Residual Stress, Deformation and Ultimate Strength of Plate Panels,Trans of JWRI, 21, pp. 127143 (1992).Google Scholar
8.Jang, C. D. and Seo, S. I., “A Simplified Method to Estimate Longitudinal Deformation of Built-Up Beams Due to Welding and Heating,Journal of Ship Research, 39, pp. 176183(1995).CrossRefGoogle Scholar
9.McDill, J. M. J., Oddy, A. S. andGoldak, J. A., “Finite Element Analysis of Weld Distortion in Carbon and Stainless Steels,Journal of Strain Analysis, 25, pp. 5153 (1990).CrossRefGoogle Scholar
10.Zhu, X. K. and Chao, Y. J., “Effects of Temperature- Dependent Material Properties on Welding Simulation,” Computers and Structures, 80, pp. 967976 (2002).CrossRefGoogle Scholar
11.Bachorski, A., Painter, M. J. and Smailes, A. J., “Finite-Element Prediction of Distortion During Gas Metal Arc Welding Using the Shrinkage Volume Approach,Journal of Materials Processing Technology, 92–93, pp. 405409 (1999).CrossRefGoogle Scholar
12.Lindgren, L. E. and Josefson, B. L., “Welding Residual Stresses and Distortions Simulated by the Use of Simplified Method, Recent Advances in Welding Simulation,IMechE Seminar Publication, 13, pp. 119 (2000).Google Scholar
13.McDill, J. M. J. and Oddy, A. S., “A Nonconforming Eight to 26-Node Hexahedron for Three-Dimensional Thermal-Elasto-Plastic Finite Element Analysis,Computers and Structures, 54, pp. 183189 (1995).CrossRefGoogle Scholar
14.Kuo, M. K. and Lee, H. T., “Inversion of Residual stress,The Chinese Journal of Mechanics, 17, pp. 103108 (2001).CrossRefGoogle Scholar
15.Wang, J. H. and Lu, G., “Some Discussions on Principle of Causing and Relieving Welding Residual Stress,Transactions of the China Welding Institution, 23, pp. 7579 (2002).Google Scholar
16.Ueda, Y., Kim, Y. C. and Yuan, M. G., “A Prediction Method of Welding Residual Stress Using Source of Residual Stress (Report I)—Characteristics of Inherent Strain (Source of Residual Stress),J Trans. of JWRI, 18, pp. 135141(1989).Google Scholar
17.Wang, J. H. and Chen, Ch., “Modified Temperature Computer System for Various Welding Joint Configurations,Transactions of the China Welding Institution, 11, pp. 5764(1990).Google Scholar