Hostname: page-component-7bb8b95d7b-cx56b Total loading time: 0 Render date: 2024-09-21T16:52:13.710Z Has data issue: false hasContentIssue false
  • English
  • Français

Investigation of a new fracture mechanics specimen for thin film adhesion measurement

Published online by Cambridge University Press:  31 January 2011

Maarten P. de Boer ,
Michael Kriese  and
William W. Gerberich
Maarten P. de Boer
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota 55455
Michael Kriese
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota 55455
William W. Gerberich
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota 55455
Get access

Abstract

We have investigated mechanical probing of a precracked fine line structure as a new type of thin film fracture mechanics specimen. An idealized mechanics analysis is first presented. Experimentally, two types of precracks are formed. A thin carbon layer to which other layers weakly adhere creates a “processed precrack” by integrated circuit processing techniques. An “indented processed precrack” is formed by precision alignment of a sharp microwedge. The processed precrack is found to reduce the critical tangential load by 50% from a non-precracked line, while the indented processed precrack lowers the load by 200%. From this, a reasonable value of adhesion may be directly calculated. Crack path behavior is observed to depend on strength of the interface. In the case of a weak interface, the crack remains in the interface as it extends. For a strong interface, it kinks into the substrate if the crack is initially short, but remains in the interface if it is initially long. Given the experimental evidence, the mechanics are slightly modified to quantitatively model the experimental data.

Type
Articles
Information
Journal of Materials Research , Volume 12 , Issue 10 , October 1997 , pp. 2673 - 2685
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Marshall, D. B. and Evans, A. G., J. Appl. Phys. 56 (10), 2632 (1984).CrossRefGoogle Scholar
2.Rossington, C., Evans, A. G., Marshall, D. B., and Khuri-Yakub, B. T., J. Appl. Phys. 56 (10), 2639 (1984).CrossRefGoogle Scholar
3.Ritter, J. E., Lardner, T. J., Rosenfeld, L., and Lin, M. R., J. Appl. Phys. 66 (8), 3236 (1989).CrossRefGoogle Scholar
4.Rosenfeld, L. G., Ritter, J. E., Lardner, T. J., and Lin, M. R., J. Appl. Phys. 67 (7), 3291 (1990).CrossRefGoogle Scholar
5.Weppelman, E. R., Hu, X-Z., and Swain, M. V., J. Adh. Sci. Technol. 8 (6), 611 (1994).CrossRefGoogle Scholar
6.de Boer, M. P. and Gerberich, W. W., Acta Metall. Mater. 44 (8), 3169 (1996).CrossRefGoogle Scholar
7.de Boer, M. P. and Gerberich, W. W., Acta Metall. Mater. 44 (8), 3177 (1996).CrossRefGoogle Scholar
8.Ross, F. M., Kola, R. R., Hull, R., and Bean, J. C., in Interface Control of Electrical, Chemical, and Mechanical Properties, edited by Murarka, S. P., Rose, K., Ohmi, T., and Seidel, T. (Mater. Res. Soc. Symp. Proc. 318, Pittsburgh, PA, 1994), p. 697.Google Scholar
9.Thornton, J. A., Ann. Rev. Mater. Sci. 7, 239 (1977).CrossRefGoogle Scholar
10.Thornton, J. A. and Hoffman, D. W., Thin Solid Films 171, 5 (1989).CrossRefGoogle Scholar
11.Mikkelson, J. M., Hall, L. A., Malhotra, A. K., Seccombe, S. D., and Wilson, M. S., IEEE ISSCC, 106 (1981).Google Scholar
12.White, R. M., in Introduction to Magnetic Recording, edited by White, R. M. (IEEE Press, New York, 1985), pp. 62–70.Google Scholar
13.Hunsperger, R. G., Integrated Optics: Theory and Technology (Springer, Berlin, 1991).CrossRefGoogle Scholar
14.Woodruff, W. W., Wilson, R. H., and Sanchez-Martinez, R. A., in Tungsten and Other Refractory Metals for VLSI Applications, edited by Blewer, R. S., (Mater. Res. Soc. Symp. Proc. V–1, Pittsburgh, PA, 1986), pp. 173–178.Google Scholar
15.Saitoh, M., Nishida, T., Suzuki, M., Kobayashi, N., and Kure, T., in Tungsten and Other Advanced Metals for VLSI/ULSI Applications V, edited by Wong, S. S. and Furukawa, S. (Mater. Res. Soc. Symp. Proc. V–5. Pittsburgh, PA, 1990), pp. 201–206.Google Scholar
16.Wong, S. S. and Furukawa, S., Tungsten and Other Refractory Metals for VLSI Applications (Mater. Res. Soc., V–5, Pittsburgh, PA, 1990).Google Scholar
17.Benjamin, P. and Weaver, C., Proceedings of the Royal Society A254, 163 (1960).Google Scholar
18.Laugier, M. T., Thin Solid Films 117, 243 (1984).CrossRefGoogle Scholar
19.Burnett, P. J. and Rickerby, D. S., Thin Solid Films 157, 233 (1988).CrossRefGoogle Scholar
20.Venkataraman, S., Kohlstedt, D. L., and Gerberich, W. W., J. Mater. Res. 7, 1126 (1992).CrossRefGoogle Scholar
21.Thouless, M. D., Evans, A. G., Ashby, M. F., and Hutchinson, J. W., Acta Metall. Mater. 35 (6), 1333 (1987).CrossRefGoogle Scholar
22.Hutchinson, J. W. and Suo, Z., in Advances in Applied Mechanics, edited by Wu, T. Y. and Hutchinson, J. W. (Academic Press, New York, 1992), Vol. 29, pp. 63–191.Google Scholar
23.Evans, A. G. and Hutchinson, J. W., Int. J. Solids Struct. 20 (5), 455 (1984).CrossRefGoogle Scholar
24.Chai, H., Babcock, C. D., and Knauss, W. G., Int. J. Solids Struct. 17 (11), 1069 (1981).CrossRefGoogle Scholar
25.Suo, Z. and Hutchinson, J. W., Int. J. Frac. 43, 1 (1990).CrossRefGoogle Scholar
26.Dundurs, J., J. Appl. Mech. 36, 650 (1969).CrossRefGoogle Scholar
27.Cao, H. C. and Evans, A. G., Mech. Mater. 7, 295 (1989).CrossRefGoogle Scholar
28.de Boer, M. P., Ph. D. Thesis, Univ. of Minnesota (1996).Google Scholar
29.Evans, A. G. and Hutchinson, J. W., Acta Metall. Mater. 37 (3), 909 (1989).CrossRefGoogle Scholar
30.Shih, C. F. and Asaro, R. J., J. Appl. Mech. 55, 299 (1988).CrossRefGoogle Scholar
31.Sze, S. M., VLSI Technology (McGraw-Hill, New York, 1983).Google Scholar
32.Wu, T. W., J. Mater. Res. 6, 407 (1991).CrossRefGoogle Scholar
33.Bagchi, A., Lucas, G. E., Suo, Z., and Evans, A. G., J. Mater. Res. 9, 1734 (1994).CrossRefGoogle Scholar
34.Stoney, G. C., Proceedings of the Royal Society A82, 72 (1909).Google Scholar
35.Haghiri-Gosnet, A. M., Ladan, F. R., Mayeux, C., Launois, H., and Joncour, M. C., J. Vac. Sci. Technol. A7 (4), 2663 (1989).CrossRefGoogle Scholar
36.Shankoff, T. A. and Chandross, E. A., J. Electrochem. Soc. 122 (2), 294 (1975).CrossRefGoogle Scholar
37.Oliver, W. C. and Pharr, G. M., J. Mater. Res. 7, 1564 (1992).CrossRefGoogle Scholar
38.King, R. B., Int. J. Solids Struct. 23 (12), 1657 (1987).CrossRefGoogle Scholar
39.Hertzberg, R. W., Deformation and Fracture Mechanics of Engineering Materials (John Wiley & Sons, New York, 1989).Google Scholar
40. Imetra, 200 Clearbrook Rd., Elmsford, NY 10523.Google Scholar
41.de Boer, M. P., Nelson, J. C., and Gerberich, W. W., J. Mater. Res., unpublished.Google Scholar
42.He, M. Y. and Hutchinson, J. W., J. Appl. Mech. 56, 270 (1989).CrossRefGoogle Scholar
43.Lawn, B., Fracture of Brittle Solids (Cambridge University Press, 1993).CrossRefGoogle Scholar
44.He, M., Bartlett, A., Evans, A. G., and Hutchinson, J. W., J. Am. Ceram. Soc. 74 (4), 767 (1991).CrossRefGoogle Scholar
45.Ross, F. M., private communication (1995).Google Scholar
46.Shunk, F. A., Constitution of Binary Alloys (McGraw Hill, New York, 1969), p. 167.Google Scholar
47.McCarty, L. V., Donelson, R., and Hehemann, R. F., Metall. Trans. 18A, 969 (1987).CrossRefGoogle Scholar
48.Ito, K., Nishimoto, K., Watanabe, K., Kataoka, I., and Widmann, F., in Materials Synthesis and Processing Using Ion Beams, edited by Culbertson, R. J., Holland, O. W., Jones, K. S., and Maex, K. (Mater. Res. Soc. Symp. Proc. 316, Pittsburgh, PA, 1994), p. 947.Google Scholar
49.Hu, M. S., Thouless, M. D., and Evans, A. G., Acta Metall. Mater. 36 (5), 1301 (1988).CrossRefGoogle Scholar
50.Cotterel, B., Kamminga, J., and Dickson, F. P., Int. J. Frac. 29, 205 (1985).CrossRefGoogle Scholar
51.Torng, C. J., Siversten, J. M., Judy, J. H., and Chang, C., J. Mater. Res. 5, 2490 (1990).CrossRefGoogle Scholar
52.Tsai, H. and Bogy, D. B., J. Vac. Sci. Technol. A5 (6), 3287 (1987).CrossRefGoogle Scholar
53.Mate, C. M., Wear 168, 17 (1993).CrossRefGoogle Scholar
54.Murr, L. E., in ASTM Special Pub. 640, edited by Mittal, K. L. (ASTM, Philadelphia, PA, 1976), pp. 82–83.Google Scholar